File:Platinum-Iridium meter bar.jpg

File originale (4 232 × 2 781 pixel, dimensione del file: 2,78 MB, tipo MIME: image/jpeg)

Logo di Commons
Logo di Commons
Questo file e la sua pagina di descrizione (discussione · modifica) si trovano su Wikimedia Commons (?)

Dettagli

Descrizione
English: Computer generated image of International Prototype Metre bar, made of 90% platinum - 10% iridium alloy. This was the standard of length for the SI (Metric system) from 1889 until 1960, when the SI system changed to a new definition of length based on the wavelength of light emitted by krypton 86. The length of the metre was defined by the distance between two fine lines ruled on the central rib of the bar near the ends, at the temperature of freezing water. The bar was given an X (Tresca) cross-sectional shape to increase its stiffness-to-weight ratio, improve its thermal accommodation time, and so the graduation lines could be located on the "neutral" axis of the bar where the change in length with flexure is minimum. The prototype was made in 1889, its length made equal to the previous French standard "Metre of the Archives". Twenty-nine identical copies were made at the same time, which were calibrated against the prototype and distributed to nations to serve as national standards.
The main problem with defining the unit of length by an artifact such as a bar is that there is no foolproof way of detecting a change in its length due to age or misuse. It can be compared to other copies, but these themselves may have changed in length. This motivated the 1960 change to a definition based on light waves. The bar is now kept in the collection of the BIPM museum.
Data Data sconosciuta
Fonte
Autore SconosciutoUnknown author
Licenza
(Riusare questo file)
Public Domain - work by employee of US Federal Government. Disclaimer on website: "With the exception of material marked as copyrighted, information presented on these pages is considered public information and may be distributed or copied."

Licenza

Public domain
This image is in the public domain in the United States because it is a work of the United States Federal Government, specifically an employee of the National Institute of Standards and Technology, under the terms of Title 17, Chapter 1, Section 105 of the US Code.

العربية  English  日本語  македонски  Nederlands  +/−

Didascalie

Aggiungi una brevissima spiegazione di ciò che questo file rappresenta
International prototype metre bar

Elementi ritratti in questo file

raffigura

Cronologia del file

Fare clic su un gruppo data/ora per vedere il file come si presentava nel momento indicato.

Data/OraMiniaturaDimensioniUtenteCommento
attuale19:11, 14 ott 2013Miniatura della versione delle 19:11, 14 ott 20134 232 × 2 781 (2,78 MB)XosemaHigher resolution.
16:18, 1 mag 2005Miniatura della versione delle 16:18, 1 mag 2005270 × 175 (21 KB)SvdmolenInternational Prototype Metre standard bar made of platinum-irridium. This was the standard until 1960, when the new SI system used a krypton-spectrum measurement as the base. In 1983 the current metre was defined by a relationship to the speed of light i

Le seguenti 3 pagine usano questo file:

Utilizzo globale del file

Anche i seguenti wiki usano questo file:

Visualizza l'utilizzo globale di questo file.

Metadati