Christmas

3.2M views · 98K reactions | Dollar Tree Lighted Christmas Gift Box Decor | By Windy City Crafts | Onto Dollar Tree, grab two of these cooling racks and one package of these shelf liners. Grab one of those cooling racks and you want to carefully bend this in the middle. These wires from Dollar Tree are very flimsy. So work slow until you get that L shaped and you want to do this to both of your cooling racks. You then just want to put them together and you want to hold them together using some zip ties. Make sure that you tie your zip ties as tight as they will go. I ended up using six zip ties total just to make sure that everything was nice and secure. I also grabbed some fairy lights from Dollar Tree. I just fed those through the inside and held those together using some more zip ties. Turn them on. Make sure that they work which they do. Then you want to grab your box and your shelf liner. Trace the top of it on the shelf liner and cut that out. Your to save this piece for later. Lay one side of your cooling rack onto the shelf liner and just start hot gluing it into place and just begin wrapping the shelf liner around the cooling rack. I ended up wrapping it twice because I didn't want the wires to show too much and wrapping it twice was the perfect amount. While you are wrapping it, you want to make sure that you hold it as tight as possible and glue it in place. This will help prevent any wrinkles. And once you have that all wrapped up if you have any excess along the top and bottom. You could easily just cut this off but what I did I wanted it to have a cleaner finish. So all I did was fold the liner on the inside and held it down with some hot glue. And then take that piece that we first cut off and glue it to the top. Then you want to grab some ribbon of your choice. Make sure that it long enough to fit all the way around your box and you want to cut two of these pieces. I glued one tail end to the inside. Flip the box around. Make sure that it is nice and even and again, make sure that you are holding it pretty tight so that there are no wrinkles and again, just hot glue it into place and then you want to add your second ribbon just going the opposite way. I then made a big fluffy bow and I just glued that to the top. Go ahead and turn your lights on and look at this cuteness. This came out so adorable. It was super inexpensive and easy to create. I hope this inspires you to create your own in your own special way. If it did, please be sure to sprinkle the love. Thank you so so much and I hope you all have a good rest of your day. Thanks. Bye.

3.2M views · 98K reactions | Dollar Tree Lighted Christmas Gift Box Decor | By Windy City Crafts | Onto Dollar Tree, grab two of these cooling racks and one package of these shelf liners. Grab one of those cooling racks and you want to carefully bend this in the middle. These wires from Dollar Tree are very flimsy. So work slow until you get that L shaped and you want to do this to both of your cooling racks. You then just want to put them together and you want to hold them together using some zip ties. Make sure that you tie your zip ties as tight as they will go. I ended up using six zip ties total just to make sure that everything was nice and secure. I also grabbed some fairy lights from Dollar Tree. I just fed those through the inside and held those together using some more zip ties. Turn them on. Make sure that they work which they do. Then you want to grab your box and your shelf liner. Trace the top of it on the shelf liner and cut that out. Your to save this piece for later. Lay one side of your cooling rack onto the shelf liner and just start hot gluing it into place and just begin wrapping the shelf liner around the cooling rack. I ended up wrapping it twice because I didn't want the wires to show too much and wrapping it twice was the perfect amount. While you are wrapping it, you want to make sure that you hold it as tight as possible and glue it in place. This will help prevent any wrinkles. And once you have that all wrapped up if you have any excess along the top and bottom. You could easily just cut this off but what I did I wanted it to have a cleaner finish. So all I did was fold the liner on the inside and held it down with some hot glue. And then take that piece that we first cut off and glue it to the top. Then you want to grab some ribbon of your choice. Make sure that it long enough to fit all the way around your box and you want to cut two of these pieces. I glued one tail end to the inside. Flip the box around. Make sure that it is nice and even and again, make sure that you are holding it pretty tight so that there are no wrinkles and again, just hot glue it into place and then you want to add your second ribbon just going the opposite way. I then made a big fluffy bow and I just glued that to the top. Go ahead and turn your lights on and look at this cuteness. This came out so adorable. It was super inexpensive and easy to create. I hope this inspires you to create your own in your own special way. If it did, please be sure to sprinkle the love. Thank you so so much and I hope you all have a good rest of your day. Thanks. Bye.

6 WAYS TO MAKE A DECO MESH BASE WREATH - HOW TO MAKE A WREATH COMPILATION 2021 #wreathtutorial

DIY Wood Slice Photo Ornaments

A Fresh Green Christmas Table - Shades of Blue Interiors

Vintage Style Bells & Bow DIY Christmas Wreath (for Winter, Too!)

Wood Slice Ornament Banners

String Art Christmas DIY Stocking Holders

Rustic Stocking Holders

New Stencil Designs!

DIY- Christmas Tree Glitter Sign, with Cutting Edge Stencils

My 25 Best Cottage Christmas DIY Decorating Ideas (Easy & Creative!)

30 Elegant Christmas Gift Wrapping Ideas (You Can Use as Decor)

8 Easy Rustic Holiday Decor Ideas

DIY YARN CHRISTMAS TREES (EASY & LAST MINUTE DECORATION IDEA) - Francine's Place Blog