vise

The first thing you will need is a sturdy bench vise (5 to 6-inch jaws) to hold your parts or tools.

I also have a Lakeside utility vise. This is on old vise that was made in Belgium probably close to a 100 years ago.

For small round parts such as firing pins, I often use a pin vise. I have several, including one that is made from, a drill chuck.

Concu comme une [beaucoup moins que]pepiniere[beaucoup plus grand que] de projets, SafirLab vise egalement, a permettre l'emergence d'un reseau fonde sur des valeurs communes et le partage d'experiences.

For Eric Sun, founder of Orange Vise Company, the unique combination of automated deburring and surfacing finishing allowed his company to eliminate several time consuming and laborious processes that had been slowing them down.

Ce programme vise l'entretien des plantes sur 8.500 ha, la mise en place d'une grande unite d'extraction d'huile d'olive, l'amelioration des revenus des agriculteurs (de 2.000 dirhams a 8.000 dirhams), la creation de 5.000 emplois, ainsi que l'augmentation de la production oleicole dans la province pour atteindre 70.000 tonnes, precise le rapport.

Le ministre libyen des Affaires etrangeres, Mohamed Abdelaziz, a juge que l'attentat qui a vise mardi dernier l'ambassade de France a Tripoli visait a "nuire aux relations bilaterales" entre la France et la Libye", evoquant notamment la piste de partisans de l'ancien regime de Kadhafi.

The Armorer's Kit includes AR Armorers Vise, AR-15 Combo Tool, Torque Wrench, Upper Vise Block Clamp with Gas Tube Alignment Tool, Maintenance Mat with Exploded View AR-15, Pivot Pin and Roll Pin Installation Tool, AR Front Sight Tool, Delta Ring Tool, Strap Wrench, AR-15 Bore Guide, AR-15 Adjustable Receiver Link, Bore Brush, .22 Cal.

The company says it's designed for one-handed use, with stainless steel spikes and a vise for securing food and objects.

Vise, chief financial officer, Americas, for Intertek Inc., recently participated in the ExxonMobil Executive In Residence Program at Lamar University in Beaumont, Texas.

Clamp one end in the face vise; hold the other end with a pipe clamp under the bench top.

Time for a vise. In most shops, the humble bench vise is the center of any real gunsmith's work space.

When the operator pushes a button, the sawframe senses the material size, the vise clamps, the sawframe makes the cut at the preset rate, then returns to clear the workpiece, opening the vise opens, ready for the next cut.

Airmen must forcefully torque an arbor chuck held in a bench vise to install/remove the cutter from the arbor.