File:Propeller blade with TKS deice boot detail.JPG
Summary
Close-up of the inboard section of a blade of an aircraft's propeller, fitted with a boot as part of a TKS fluid de-ice system. The rubber boot is moulded with channels and ridges to help in spreading the de-icing fluid along the leading edge of the blade. The end of a black metal pipe can be seen poking out from behind the unpainted metal of the propeller spinner (the cover for the propeller hub); there is a pipe for each propeller blade. The other end of the pipe is connected to a ring which runs around the propeller hub. The ring is cup-shaped in cross-section; de-icing fluid is squirted out of another pipe bolted to the engine and is collected by the ring. As the propeller spins, centrifugal force causes the fluid to run through the pipes attached to the ring, then the fluid dribbles onto each blade's boot. Centrifugal force and the channels on the boot spread the fluid along the leading edges of the propeller blades.
Licensing
Lua error in package.lua at line 80: module 'strict' not found.
File history
Click on a date/time to view the file as it appeared at that time.
Date/Time | Thumbnail | Dimensions | User | Comment | |
---|---|---|---|---|---|
current | 04:09, 9 January 2017 | 5,184 × 3,456 (3.72 MB) | 127.0.0.1 (talk) | Close-up of the inboard section of a blade of an aircraft's propeller, fitted with a boot as part of a TKS fluid de-ice system. The rubber boot is moulded with channels and ridges to help in spreading the de-icing fluid along the leading edge of the blade. The end of a black metal pipe can be seen poking out from behind the unpainted metal of the propeller spinner (the cover for the propeller hub); there is a pipe for each propeller blade. The other end of the pipe is connected to a ring which runs around the propeller hub. The ring is cup-shaped in cross-section; de-icing fluid is squirted out of another pipe bolted to the engine and is collected by the ring. As the propeller spins, centrifugal force causes the fluid to run through the pipes attached to the ring, then the fluid dribbles onto each blade's boot. Centrifugal force and the channels on the boot spread the fluid along the leading edges of the propeller blades. |
- You cannot overwrite this file.
File usage
The following page links to this file: