commit 7e40e0b upstream.

When an program is streaming (ffplay) and another program (qv4l2)
changes the TV standard from NTSC to PAL, the kernel crashes due to trying
to copy to unmapped memory.

Changing from NTSC to PAL increases the resolution in the usbtv struct,
but the video plane buffer isn't adjusted, so it overflows.

Fixes: 0e0fe39 ("[media] usbtv: Add support for PAL video source")
Cc: stable@vger.kernel.org
Signed-off-by: Ludwig Disterhof <ludwig@disterhof.eu>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: call vb2_is_busy instead of vb2_is_streaming]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7af160a upstream.

In the interrupt handler rain_interrupt(), the buffer full check on
rain->buf_len is performed before acquiring rain->buf_lock. This
creates a Time-of-Check to Time-of-Use (TOCTOU) race condition, as
rain->buf_len is concurrently accessed and modified in the work
handler rain_irq_work_handler() under the same lock.

Multiple interrupt invocations can race, with each reading buf_len
before it becomes full and then proceeding. This can lead to both
interrupts attempting to write to the buffer, incrementing buf_len
beyond its capacity (DATA_SIZE) and causing a buffer overflow.

Fix this bug by moving the spin_lock() to before the buffer full
check. This ensures that the check and the subsequent buffer modification
are performed atomically, preventing the race condition. An corresponding
spin_unlock() is added to the overflow path to correctly release the
lock.

This possible bug was found by an experimental static analysis tool
developed by our team.

Fixes: 0f314f6 ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e9bb2ea upstream.

During the probe() routine, the PiSP BE driver needs to power up the
interface in order to identify and initialize the hardware.

The driver resumes the interface by calling the
pispbe_runtime_resume() function directly, without going
through the pm_runtime helpers, but later suspends it by calling
pm_runtime_put_autosuspend().

This causes a PM usage count imbalance at probe time, notified by the
runtime_pm framework with the below message in the system log:

 pispbe 1000880000.pisp_be: Runtime PM usage count underflow!

Fix this by resuming the interface using the pm runtime helpers instead
of calling the resume function directly and use the pm_runtime framework
in the probe() error path. While at it, remove manual suspend of the
interface in the remove() function. The driver cannot be unloaded if in
use, so simply disable runtime pm.

To simplify the implementation, make the driver depend on PM as the
RPI5 platform where the ISP is integrated in uses the PM framework by
default.

Fixes: 12187bd ("media: raspberrypi: Add support for PiSP BE")
Cc: stable@vger.kernel.org
Tested-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 76142b1 upstream.

ov2659_probe() doesn't properly free control handler resources in failure
paths, causing memory leaks. Add v4l2_ctrl_handler_free() to prevent these
memory leaks and reorder the ctrl_handler assignment for better code flow.

Fixes: c4c0283 ("[media] media: i2c: add support for omnivision's ov2659 sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 298d147 upstream.

Getting / Setting the frame interval using the V4L2 subdev pad ops
get_frame_interval/set_frame_interval causes a deadlock, as the
subdev state is locked in the [1] but also in the driver itself.

In [2] it's described that the caller is responsible to acquire and
release the lock in this case. Therefore, acquiring the lock in the
driver is wrong.

Remove the lock acquisitions/releases from mt9m114_ifp_get_frame_interval()
and mt9m114_ifp_set_frame_interval().

[1] drivers/media/v4l2-core/v4l2-subdev.c - line 1129
[2] Documentation/driver-api/media/v4l2-subdev.rst

Fixes: 24d756e ("media: i2c: Add driver for onsemi MT9M114 camera sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Mathis Foerst <mathis.foerst@mt.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

… calls

commit 0c92c49 upstream.

Both the ACE and CSI driver are missing a mei_cldev_disable() call in
their remove() function.

This causes the mei_cl client to stay part of the mei_device->file_list
list even though its memory is freed by mei_cl_bus_dev_release() calling
kfree(cldev->cl).

This leads to a use-after-free when mei_vsc_remove() runs mei_stop()
which first removes all mei bus devices calling mei_ace_remove() and
mei_csi_remove() followed by mei_cl_bus_dev_release() and then calls
mei_cl_all_disconnect() which walks over mei_device->file_list dereferecing
the just freed cldev->cl.

And mei_vsc_remove() it self is run at shutdown because of the
platform_device_unregister(tp->pdev) in vsc_tp_shutdown()

When building a kernel with KASAN this leads to the following KASAN report:

[ 106.634504] ==================================================================
[ 106.634623] BUG: KASAN: slab-use-after-free in mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei
[ 106.634683] Read of size 4 at addr ffff88819cb62018 by task systemd-shutdow/1
[ 106.634729]
[ 106.634767] Tainted: [E]=UNSIGNED_MODULE
[ 106.634770] Hardware name: Dell Inc. XPS 16 9640/09CK4V, BIOS 1.12.0 02/10/2025
[ 106.634773] Call Trace:
[ 106.634777]  <TASK>
...
[ 106.634871] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636)
[ 106.634901] mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei
[ 106.634921] mei_cl_all_disconnect (drivers/misc/mei/client.c:2165 (discriminator 4)) mei
[ 106.634941] mei_reset (drivers/misc/mei/init.c:163) mei
...
[ 106.635042] mei_stop (drivers/misc/mei/init.c:348) mei
[ 106.635062] mei_vsc_remove (drivers/misc/mei/mei_dev.h:784 drivers/misc/mei/platform-vsc.c:393) mei_vsc
[ 106.635066] platform_remove (drivers/base/platform.c:1424)

Add the missing mei_cldev_disable() calls so that the mei_cl gets removed
from mei_device->file_list before it is freed to fix this.

Fixes: 78876f7 ("media: pci: intel: ivsc: Add ACE submodule")
Fixes: 29006e1 ("media: pci: intel: ivsc: Add CSI submodule")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…path

commit 69080ec upstream.

A call to media_device_init() requires media_device_cleanup() counterpart
to complete cleanup and release any allocated resources.

This has been done in the driver .remove() right from the beginning, but
error paths on .probe() shall also be fixed.

Fixes: a1d7c11 ("media: camms: Add core files")
Cc: stable@vger.kernel.org
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…emory

commit 49befc8 upstream.

Add a check to ensure that the packet size does not exceed the number of
available words after reading the packet header from shared memory. This
ensures that the size provided by the firmware is safe to process and
prevent potential out-of-bounds memory access.

Fixes: d96d3f3 ("[media] media: venus: hfi: add Venus HFI files")
Cc: stable@vger.kernel.org
Signed-off-by: Vedang Nagar <quic_vnagar@quicinc.com>
Co-developed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ee3b94f upstream.

Fill in the correct data for the production SKU.

Fixes: 193b3da ("media: venus: add msm8998 support")
Cc: stable@vger.kernel.org
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 6408030 upstream.

Ensure the IRQ is disabled - and all pending handlers completed - before
dismantling the interrupt routing and clearing related pointers.

This prevents any possibility of the interrupt triggering after the
handler context has been invalidated.

Fixes: d96d3f3 ("[media] media: venus: hfi: add Venus HFI files")
Cc: stable@vger.kernel.org
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Dikshita Agarwal <quic_dikshita@quicinc.com> # RB5
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3200144 upstream.

Make sure the interrupt handler is initialized before the interrupt is
registered.

If the IRQ is registered before hfi_create(), it's possible that an
interrupt fires before the handler setup is complete, leading to a NULL
dereference.

This error condition has been observed during system boot on Rb3Gen2.

Fixes: af2c383 ("[media] media: venus: adding core part and helper functions")
Cc: stable@vger.kernel.org
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Dikshita Agarwal <quic_dikshita@quicinc.com> # RB5
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 377dc50 upstream.

The driver uses "whole" fps in all its calculations (e.g. in
load_per_instance()). Those calculation expect an fps bigger than 1, and
not big enough to overflow.

Clamp the value if the user provides a param that will result in an invalid
fps.

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Closes: https://lore.kernel.org/linux-media/f11653a7-bc49-48cd-9cdb-1659147453e4@xs4all.nl/T/#m91cd962ac942834654f94c92206e2f85ff7d97f0
Fixes: 7472c1c ("[media] media: venus: vdec: add video decoder files")
Cc: stable@vger.kernel.org
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # qrb5615-rb5
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
[bod: Change "parm" to "param"]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 417c01b upstream.

The driver uses "whole" fps in all its calculations (e.g. in
load_per_instance()). Those calculation expect an fps bigger than 1, and
not big enough to overflow.

Clamp the param if the user provides a value that will result in an invalid
fps.

Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Closes: https://lore.kernel.org/linux-media/f11653a7-bc49-48cd-9cdb-1659147453e4@xs4all.nl/T/#m91cd962ac942834654f94c92206e2f85ff7d97f0
Fixes: aaaa93e ("[media] media: venus: venc: add video encoder files")
Cc: stable@vger.kernel.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
[bod: Change "parm" to "param"]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 514678d upstream.

We only need the fw based discovery table for sysfs.  No
need to parse it.  Additionally parsing some of the board
specific tables may result in incorrect data on some boards.
just load the binary and don't parse it on those boards.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4441
Fixes: 80a0e82 ("drm/amdgpu/discovery: optionally use fw based ip discovery")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62eedd150fa11aefc2d377fc746633fdb1baeb55)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ed4efe4 upstream.

The power limit will be cached in smu->current_power_limit but
if the ASIC goes into S3 this value won't be restored.

Restore the value during SMU resume.

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250725031222.3015095-2-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 26a609e053a6fc494403e95403bc6a2470383bec)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1f02f20 upstream.

If vm belongs to another process, this is fclose after fork,
wait may enable signaling KFD eviction fence and cause parent process queue evicted.

[677852.634569]  amdkfd_fence_enable_signaling+0x56/0x70 [amdgpu]
[677852.634814]  __dma_fence_enable_signaling+0x3e/0xe0
[677852.634820]  dma_fence_wait_timeout+0x3a/0x140
[677852.634825]  amddma_resv_wait_timeout+0x7f/0xf0 [amdkcl]
[677852.634831]  amdgpu_vm_wait_idle+0x2d/0x60 [amdgpu]
[677852.635026]  amdgpu_flush+0x34/0x50 [amdgpu]
[677852.635208]  filp_flush+0x38/0x90
[677852.635213]  filp_close+0x14/0x30
[677852.635216]  do_close_on_exec+0xdd/0x130
[677852.635221]  begin_new_exec+0x1da/0x490
[677852.635225]  load_elf_binary+0x307/0xea0
[677852.635231]  ? srso_alias_return_thunk+0x5/0xfbef5
[677852.635235]  ? ima_bprm_check+0xa2/0xd0
[677852.635240]  search_binary_handler+0xda/0x260
[677852.635245]  exec_binprm+0x58/0x1a0
[677852.635249]  bprm_execve.part.0+0x16f/0x210
[677852.635254]  bprm_execve+0x45/0x80
[677852.635257]  do_execveat_common.isra.0+0x190/0x200

Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Gang Ba <Gang.Ba@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b4a69f7 upstream.

HUBBUB structure is not initialized on DCE hardware, so check if it is NULL
to avoid null dereference while accessing amdgpu_dm_capabilities file in
debugfs.

Signed-off-by: Peter Shkenev <mustela@erminea.space>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c90f2e1 upstream.

After a recent change in clang to expose uninitialized warnings from
const variables and pointers [1], there is a warning in
imu_v12_0_program_rlc_ram() because data is passed uninitialized to
program_imu_rlc_ram():

  drivers/gpu/drm/amd/amdgpu/imu_v12_0.c:374:30: error: variable 'data' is uninitialized when used here [-Werror,-Wuninitialized]
    374 |                         program_imu_rlc_ram(adev, data, (const u32)size);
        |                                                   ^~~~

As this warning happens early in clang's frontend, it does not realize
that due to the assignment of r to -EINVAL, program_imu_rlc_ram() is
never actually called, and even if it were, data would not be
dereferenced because size is 0.

Just initialize data to NULL to silence the warning, as the commit that
added program_imu_rlc_ram() mentioned it would eventually be used over
the old method, at which point data can be properly initialized and
used.

Cc: stable@vger.kernel.org
Closes: ClangBuiltLinux/linux#2107
Fixes: 56159ff ("drm/amdgpu: use new method to program rlc ram")
Link: llvm/llvm-project@2464313 [1]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 05c8b69 upstream.

Use different external revid for GC v9.5.0 SOCs.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 21c6764ed4bfaecad034bc4fd15dd64c5a436325)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0bae62c upstream.

Update the client id mapping so the correct clients
get printed when there is a mmhub page fault.

Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2a2681eda73b99a2c1ee8cdb006099ea5d0c2505)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a0b34e4 upstream.

Update the client id mapping so the correct clients
get printed when there is a mmhub page fault.

Tested-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2e58401 upstream.

Since KFD proc content was moved to kernel debugfs, we can't destroy KFD
debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior
to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens
when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but
kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line
    debugfs_remove_recursive(entry->proc_dentry);
tries to remove /sys/kernel/debug/kfd/proc/<pid> while
/sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel
NULL pointer.

Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Eric Huang <jinhuieric.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3477c1b upstream.

amdgpu_dm_commit_planes calls update_freesync_state_on_stream only for
the primary plane. If a commit affects a CRTC but not its primary plane,
it would previously not trigger a refresh cycle or affect LFC, violating
current UAPI semantics.

Fixes e.g. atomic commits affecting only the cursor plane being limited
to the minimum refresh rate.

Don't do this for the legacy cursor ioctls though, it would break the
UAPI semantics for those.

Suggested-by: Xaver Hugl <xaver.hugl@kde.org>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3034
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cc7bfba95966251b254cb970c21627124da3b7f4)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1bcf63a upstream.

[Why]
A null pointer dereference vulnerability exists in the AMD display driver's
(DC module) cleanup function dc_destruct().
When display control context (dc->ctx) construction fails
(due to memory allocation failure), this pointer remains NULL.
During subsequent error handling when dc_destruct() is called,
there's no NULL check before dereferencing the perf_trace member
(dc->ctx->perf_trace), causing a kernel null pointer dereference crash.

[How]
Check if dc->ctx is non-NULL before dereferencing.

Link: https://lore.kernel.org/r/tencent_54FF4252EDFB6533090A491A25EEF3EDBF06@qq.com
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
(Updated commit text and removed unnecessary error message)
Signed-off-by: Siyang Liu <Security@tencent.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9dd8e2ba268c636c240a918e0a31e6feaee19404)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4db9cd5 upstream.

dc_clk_mgr_create accidentally overwrites the dce60_clk_mgr
with the dce_clk_mgr, causing incorrect behaviour on DCE6.
Fix it by removing the extra dce_clk_mgr_construct.

Fixes: 62eab49 ("drm/amd/display: hide VGH asic specific structs")
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bbddcbe36a686af03e91341b9bbfcca94bd45fb6)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4be8cef upstream.

Add the flag KVM_LARCH_LBT checking in function kvm_own_lbt(), so that
it can be called safely rather than duplicated enabling again.

Cc: stable@vger.kernel.org
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7af76e9 upstream.

Receiving HSR frame with insufficient space to hold HSR tag in the skb
can result in a crash (kernel BUG):

[   45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1
[   45.392559] ------------[ cut here ]------------
[   45.392912] kernel BUG at net/core/skbuff.c:211!
[   45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[   45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 raspberrypi#12 PREEMPT(undef)
[   45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[   45.395273] RIP: 0010:skb_panic+0x15b/0x1d0

<snip registers, remove unreliable trace>

[   45.402911] Call Trace:
[   45.403105]  <IRQ>
[   45.404470]  skb_push+0xcd/0xf0
[   45.404726]  br_dev_queue_push_xmit+0x7c/0x6c0
[   45.406513]  br_forward_finish+0x128/0x260
[   45.408483]  __br_forward+0x42d/0x590
[   45.409464]  maybe_deliver+0x2eb/0x420
[   45.409763]  br_flood+0x174/0x4a0
[   45.410030]  br_handle_frame_finish+0xc7c/0x1bc0
[   45.411618]  br_handle_frame+0xac3/0x1230
[   45.413674]  __netif_receive_skb_core.constprop.0+0x808/0x3df0
[   45.422966]  __netif_receive_skb_one_core+0xb4/0x1f0
[   45.424478]  __netif_receive_skb+0x22/0x170
[   45.424806]  process_backlog+0x242/0x6d0
[   45.425116]  __napi_poll+0xbb/0x630
[   45.425394]  net_rx_action+0x4d1/0xcc0
[   45.427613]  handle_softirqs+0x1a4/0x580
[   45.427926]  do_softirq+0x74/0x90
[   45.428196]  </IRQ>

This issue was found by syzkaller.

The panic happens in br_dev_queue_push_xmit() once it receives a
corrupted skb with ETH header already pushed in linear data. When it
attempts the skb_push() call, there's not enough headroom and
skb_push() panics.

The corrupted skb is put on the queue by HSR layer, which makes a
sequence of unintended transformations when it receives a specific
corrupted HSR frame (with incomplete TAG).

Fix it by dropping and consuming frames that are not long enough to
contain both ethernet and hsr headers.

Alternative fix would be to check for enough headroom before skb_push()
in br_dev_queue_push_xmit().

In the reproducer, this is injected via AF_PACKET, but I don't easily
see why it couldn't be sent over the wire from adjacent network.

Further Details:

In the reproducer, the following network interface chain is set up:

┌────────────────┐   ┌────────────────┐
│ veth0_to_hsr   ├───┤  hsr_slave0    ┼───┐
└────────────────┘   └────────────────┘   │
                                          │ ┌──────┐
                                          ├─┤ hsr0 ├───┐
                                          │ └──────┘   │
┌────────────────┐   ┌────────────────┐   │            │┌────────┐
│ veth1_to_hsr   ┼───┤  hsr_slave1    ├───┘            └┤        │
└────────────────┘   └────────────────┘                ┌┼ bridge │
                                                       ││        │
                                                       │└────────┘
                                                       │
                                        ┌───────┐      │
                                        │  ...  ├──────┘
                                        └───────┘

To trigger the events leading up to crash, reproducer sends a corrupted
HSR frame with incomplete TAG, via AF_PACKET socket on 'veth0_to_hsr'.

The first HSR-layer function to process this frame is
hsr_handle_frame(). It and then checks if the
protocol is ETH_P_PRP or ETH_P_HSR. If it is, it calls
skb_set_network_header(skb, ETH_HLEN + HSR_HLEN), without checking that
the skb is long enough. For the crashing frame it is not, and hence the
skb->network_header and skb->mac_len fields are set incorrectly,
pointing after the end of the linear buffer.

I will call this a BUG#1 and it is what is addressed by this patch. In
the crashing scenario before the fix, the skb continues to go down the
hsr path as follows.

hsr_handle_frame() then calls this sequence
hsr_forward_skb()
  fill_frame_info()
    hsr->proto_ops->fill_frame_info()
      hsr_fill_frame_info()

hsr_fill_frame_info() contains a check that intends to check whether the
skb actually contains the HSR header. But the check relies on the
skb->mac_len field which was erroneously setup due to BUG#1, so the
check passes and the execution continues  back in the hsr_forward_skb():

hsr_forward_skb()
  hsr_forward_do()
    hsr->proto_ops->get_untagged_frame()
      hsr_get_untagged_frame()
        create_stripped_skb_hsr()

In create_stripped_skb_hsr(), a copy of the skb is created and is
further corrupted by operation that attempts to strip the HSR tag in a
call to __pskb_copy().

The skb enters create_stripped_skb_hsr() with ethernet header pushed in
linear buffer. The skb_pull(skb_in, HSR_HLEN) thus pulls 6 bytes of
ethernet header into the headroom, creating skb_in with a headroom of
size 8. The subsequent __pskb_copy() then creates an skb with headroom
of just 2 and skb->len of just 12, this is how it looks after the copy:

gdb) p skb->len
$10 = 12
(gdb) p skb->data
$11 = (unsigned char *) 0xffff888041e45382 "\252\252\252\252\252!\210\373",
(gdb) p skb->head
$12 = (unsigned char *) 0xffff888041e45380 ""

It seems create_stripped_skb_hsr() assumes that ETH header is pulled
in the headroom when it's entered, because it just pulls HSR header on
top. But that is not the case in our code-path and we end up with the
corrupted skb instead. I will call this BUG#2

*I got confused here because it seems that under no conditions can
create_stripped_skb_hsr() work well, the assumption it makes is not true
during the processing of hsr frames - since the skb_push() in
hsr_handle_frame to skb_pull in hsr_deliver_master(). I wonder whether I
missed something here.*

Next, the execution arrives in hsr_deliver_master(). It calls
skb_pull(ETH_HLEN), which just returns NULL - the SKB does not have
enough space for the pull (as it only has 12 bytes in total at this
point).

*The skb_pull() here further suggests that ethernet header is meant
to be pushed through the whole hsr processing and
create_stripped_skb_hsr() should pull it before doing the HSR header
pull.*

hsr_deliver_master() then puts the corrupted skb on the queue, it is
then picked up from there by bridge frame handling layer and finally
lands in br_dev_queue_push_xmit where it panics.

Cc: stable@kernel.org
Fixes: 48b491a ("net: hsr: fix mac_len checks")
Reported-by: syzbot+a81f2759d022496b40ab@syzkaller.appspotmail.com
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250819082842.94378-1-acsjakub@amazon.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ddf7233 upstream.

When enabling a sched_ext scheduler, we may trigger invalid task state
transitions, resulting in warnings like the following (which can be
easily reproduced by running the hotplug selftest in a loop):

 sched_ext: Invalid task state transition 0 -> 3 for fish[770]
 WARNING: CPU: 18 PID: 787 at kernel/sched/ext.c:3862 scx_set_task_state+0x7c/0xc0
 ...
 RIP: 0010:scx_set_task_state+0x7c/0xc0
 ...
 Call Trace:
  <TASK>
  scx_enable_task+0x11f/0x2e0
  switching_to_scx+0x24/0x110
  scx_enable.isra.0+0xd14/0x13d0
  bpf_struct_ops_link_create+0x136/0x1a0
  __sys_bpf+0x1edd/0x2c30
  __x64_sys_bpf+0x21/0x30
  do_syscall_64+0xbb/0x370
  entry_SYSCALL_64_after_hwframe+0x77/0x7f

This happens because we skip initialization for tasks that are already
dead (with their usage counter set to zero), but we don't exclude them
during the scheduling class transition phase.

Fix this by also skipping dead tasks during class swiching, preventing
invalid task state transitions.

Fixes: a8532fa ("sched_ext: TASK_DEAD tasks must be switched into SCX on ops_enable")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a458b29 upstream.

To prevent timing attacks, MACs need to be compared in constant time.
Use the appropriate helper function for this.

Fixes: bf355b8 ("ipv6: sr: add core files for SR HMAC support")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250818202724.15713-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Allow the EROFS filing system to use the kernel's ZSTD compression
library.

See: raspberrypi#6726

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

5 minutes seems to be failing on a regular basis, so
increase it.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

max-speed is a generic property for ethernet PHYs, so should be supported
by the PHY on CM4/Pi4/Pi400.

Add the override and update the documentation accordingly.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

max-speed is a generic property for ethernet PHYs, so is
supported by the PHY on Pi5, Pi500, and CM5.

Add the override and update the documentation accordingly.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Device links are used to keep track of suppliers and consumers of
resources, adding some control over the ordering of device probes other
than returning -EPROBE_DEFER. The way the RP1 device is created breaks
this mechanism in the rare case that the use of modules has been
completely disabled, thanks to some opimisations within the device link
code.

Fix this glitch by giving the corresponding fwnode a pointer to the
device, taking the opportunity to remove a pointless check on the
validity of the rp1_node pointer.

See: raspberrypi#7018
Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

They're supported by the standard BMP280 driver, so only
needed the overlay configuration.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Both drivers/gpu/drm/solomon/ssd130x-i2c.c and
drivers/video/fbdev/ssd1307fb.c were registering the compatible
"solomon,ssd1306fb-i2c", so bringing ambiguity as to which one
got loaded.

fbdev is largely deprecated, so adopt the updated compatible
for the drm driver.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

Increase the timeout for the toolchain installation in the
dtoverlaycheck workflow, to match that for the kernel.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Added 2 overlays for the rpi-power HAT to operate in
either TOP or BOTTOM mode.
Modified makefile and readme accordingly

Signed-off-by: Lucas Hoffmann <lucas.hoffmann@raspberrypi.com>