Nightmare before christmas fountain

(3) “Halloween Town” fountain sketches from The Nightmare Before Christmas. (Buena Vista, 1993) Original concept sketch for the famous “Halloween Town” fountain. Accomplished in pencil, pen, ink and artist markers. Three separate sketches (1) 9 x 13 in. sketch of the fountain spewing green liquid (1) 8 x 5.5 in. sketch of the fountain with the note; “Note sequined eyes” (1) 8.5 x 10 in. overhead view sketch labeled “Down view of the Pool”

Ok, so a few weeks ago I thought it would be super awesome to make a life size nightmare before christmas halloween town fountain (86 the water). I did some...

Hey there everyone. Just wanted to show you a little upgrade I did to one of my Nightmare Before Christmas sculptures. I really wanted to do the green slimey fountain liquid for the longest time, but I was not sure how to do it. I finally decided to use colored hot glue and it turned out great! Please enjoy the pics and behind the scenes commentary. Here is the sculpture before adding slime First I got a full pack of Hot Glue gun sticks and put it in a non stick pot at about 7 heat I created…

My DIY Nightmare Before Christmas fountain prop 2016 DH

Nightmare Before Christmas — Frightful Fountain

Every "The Nightmare Before Christmas" fanatic out there are sure to love this fan recreation Halloween Town fountain! Included here are all the STL files you'll need to make a working desktop fountain (mini-pump not included of course!), or just an awesome desktop prop. Note: If you decide to make a fountain then you'll need to use some Epoxy sculpt to close the hole at the bottom of the fountain to make it water tight after installing your pump of choice. We recommend printing the…

Nightmare before Christmas fountain for home haunt by Sue Roberts.

I started this model some time ago and decided it's time to finish it! Add supports as you see fit. I didn't use any for the "NBC Hill cut.stl" and it worked out fine. This is a long print at .15 layer height. It took over 24 hours. Printed in black and yellow PLA. The moon can be lit from behind so it glows. You could also use glow-in-the-dark filament....? The crosses have been separated so they would not need supports. The print measures 180,102, 90 mm. If you choose to reduce the scale…