Фигурка Хильды

This model is based on Hilda from Netflix animated series. It's an adorable show!

Infill 15% - 20%
Print Speed: 45mm/s
Use brim if you need it

Total time: ~25-30h
Dimensions: 16.2cm x 16.2cm x 24.8cm

Glue is necessary

Part List:

Base.stl ~9h
Body_L.stl ~2h15m
Body_R.stl ~2h
Boot_L.stl ~1h40m
Boot_R.stl ~1h40m
Bush_1.stl ~30m
Bush_2.stl ~1h
Eye_L.stl ~20m
Eye_R.stl ~20m
Eyebrown_L.stl ~5m
Eyebrown_R.stl ~5m
Hair.stl ~9h15m
Hand_L.stl ~15m
Hand_R.stl ~15m
Hat.stl ~1h
Hat_Hair_Pin.stl ~10m
Head.stl ~5h
Head_Body_Pin.stl ~20m
House_1.stl ~40m
House_1_Roof.stl ~30m
House_1_Window_1.stl ~1m
House_1_Window_2.stl ~1m
House_1_Window_3.stl ~1m
House_2.stl ~40m
House_2_Roof.stl ~30m
House_2_Window_1.stl ~1m
House_2_Window_2.stl ~1m
House_2_Window_3.stl ~1m
House_3.stl ~40m
House_3_Roof.stl ~30m
House_3_Window_1.stl ~1m
House_3_Window_2.stl ~1m
House_3_Window_3.stl ~1m
House_Door.stl ~1m
House_Fireplace_Top.stl ~1m
Legs.stl ~2h
Pupil_L.stl ~1m
Pupil_R.stl ~1m
Rock_1.stl ~15m
Rock_2.stl ~15m
Rock_3.stl ~25m
Rock_4.stl ~15m
Scarf.stl ~2h15m
Scarf_Custom_Supports.stl
Skirt.stl ~2h
Skirt_Body_Pin.stl ~15m
Teeth.stl ~5m
Teeth_Tool.stl ~5m
Tongue.stl ~5m
T-shirt_Sleeve_L.stl ~5m
T-shirt_Sleeve_R.stl ~5m

Printed with supports:

Eyebrown_R.stl
Tongue.stl
Head.stl
Scarf.stl (The scarf is a tricky one to print. Import the scarf and the custom support into Cura. Rotate them if necessary. Select both > right clic > Center Selected. Finish adjusting the custom support to the scarf manually for better fit. Select the custom support model > Per Model Settings tab > Print as support. The image shows how it should look when the custom support is completely adjusted to the scarf)

Happy Printing!