Diy slat cabinet door

My next project is painted built-ins. I'll add fluting to the doors with Pole Wrap and paint it a classic color, which I've narrowed to 5.

If you want the best DIY Ikea hack ever then read this now! I am using the on trend cane to make cabinets that will dress your home up in a hot second!

How to Make a Sliding Tambour Door - Tambour doors are flexible sliding doors that are made from several slats called tambours. The tambour slats are attached to a piece of canvas. Tambour doors are often used on roll top desks, console cabinets, and kitchen appliance garage cabinets. #RocklerSkillBuilders #WoodworkingVideo #LearnHowToBuild

Amanda Becker | Furniture Flips on Instagram: "Pro tip: use wood sticks to spice up any cabinet door! ✨ We used wooden slats from an old room divider to make this geometric pattern, but any wood sticks will do— and the best part is the pattern options are endless! We used miter shears to cut our slats to 45 degree angles, glued our pattern down with @loctiteglue , and nailed over the top for extra security. We used a scrap piece for a spacer to keep our design even and played around from…

Our family room walls are pretty bare, and when I say pretty bare, I actually mean they’re empty. I used to hang stuff on the walls without a second thought left and right. I would leave whatever it was up for a few months, then I would want to take it down and swap it out for something else, which meant joint compound, patching, drying, sanding etc to make sure my wall looked brand new.These days I’m a little more particular about what goes up on the wall. I am going for design longevity…

The anticipation for this project has been building up since we started 16 weeks ago (not a typo ?) and today is the day my friends! This post is a recap of my ‘Cabinets’ story highlight on instagram and a two part tutorial—painting cabinet doors and adding DIY fluted trim. I got the idea to […]

Do you love the look of fluted cabinets, but not the price tag? Don’t worry - I gotchu! In this post, I’m sharing how I created fluted cabinet doors with just some plywood and a table saw - no dowel rods or pole wrap required!