Jump to content

Renfe Class 354

From Wikipedia, the free encyclopedia
Renfe Class 354
354.003 Virgen de la Encarnación
Type and origin
Power typeDiesel-hydraulic
DesignerKrauss-Maffei
BuilderKrauss-Maffei
Serial number354-001 to 354-008[1]
Build date1983/4
Total produced8
Rebuild date?
Number rebuilt8
Specifications
Configuration:
​
 • UICB'B'
Gauge1,668 mm (5 ft 5+21⁄32 in)
Length19.92 m (65 ft 4+1⁄4 in)
Width3.04 m (9 ft 11+11⁄16 in)
Height3.45 m (11 ft 3+13⁄16 in)
Loco weight80 t (79 long tons; 88 short tons)
Fuel capacity4,000 L (880 imp gal; 1,100 US gal)
Prime mover2 x MTU 396 TD 13
Engine typeV16
Cylinders2 x 16
Transmission2 x Voith L 520 rz U2 Hydraulic
MU workingNo[citation needed]
Safety systemsASFA
Performance figures
Maximum speedservice : 180 km/h (110 mph)[2]
top speed : 200 km/h (125 mph)[2]
Power output2 x 1,535 kW (2,058 hp; 2,087 PS) UIC =
3,070 kW (4,117 hp; 4,174 PS)[2]
Career
OperatorsRenfe
NicknamesTalgas
LocaleSpain
Delivered1983
Sources:[3]

The Renfe Class 354 was a series of eight diesel hydraulic locomotives manufactured by Krauss-Maffei in Germany specifically to pull Talgo pendular coaches which were introduced shortly before the acquisition of these machines.

The appearance and design is very similar to the Renfe Class 353, but with improvements; specifically in terms of installed power.

Background and design

[edit]

Delivered between 1983 and 1984, these engines provide a total power of 4,171 hp (3,110 kW), a figure never before reached by any other Spanish locomotive[note 1] The units have two cabins, like the predecessor Class 353, the twin-engined / twin hydraulic transmission design from Krauss-Maffei can be traced back in Spain to the single cabined Renfe Class 352 and the Renfe Class 340, and further back to the DB Class V 200 of the Deutsche Bundesbahn.

The locomotives represent a steadily increasing requirement for engine power, from the Class 352, to the Class 353, and then to these engines, with over 800 hp more power. Such high power was needed to drag the new Talgo tilting trains, which thanks to their natural pendulation system can be used with higher lateral acceleration than conventional trains, passing through curves at up to 25% faster. With these locomotives a maximum speed of this train was originally 180 km/h (110 mph). Later in July 1986 a simple change of gearing and the fitting of the 'ASFA 200' safety system enabled the maximum speed of these locomotives to be raised up to 200 km/h (125 mph).

The only other diesel locomotive in Renfe's fleet with a maximum speed of 200 km/h (125 mph) is the more recent diesel electric Renfe Class 334 (as of 2009) however this locomotive has a lower engine power, further reduced by the requirement to provide an electrical supply for the carriages,[note 2] giving it a disappointing acceleration performance in comparison.[4]

Initially, they were delivered in the same livery as the Talgo pendular, i.e. white and blue. Later they received the Grandes Lineas livery, also based on white and blue, (in July 1998 354-003 was the first to receive it). In 2004 the logo 'Talgo' was removed from the sides of the locomotives - a minor change.

The class later received improvements such as sound-proofing of the cabin and air conditioning equipment (fitted on the roof).[when?]

Operations

[edit]

The first unit arrived in 1982 and was tested on the lines of Madrid - Villalba, Madrid - Almeria, Madrid - El Goloso and Madrid - Alcázar de San Juan. The machines were assigned to the depot at Madrid-Aravaca.

Initially the units worked on the Talgo pendular Madrid - A Coruña and alongside the Class 353 on the Talgo pendular Madrid - Paris (at far as the gauge change at Irún). From 25 May 1983: the beginning of the summer service they were also used to pull the Talgo pendular Madrid - Cadiz replacing the electric Japanese Renfe Class 269 which had experienced difficulties due to a non-compensated overhead lines.

Tests conducted with 354-002 and 354-003 between Seville and Jerez had achieved a speed of 160 kilometres per hour (99 mph) without encountering any significant problems. However breakdowns of the hydraulic transmissions occur, whilst some units still being in production at the Krauss-Maffei factory in Munich; the unfinished units have the problem corrected before being delivered.

When the eight units became redundant[why?] on the Talgo Pendular they were used on conventional trains fitted with a generator van of type "DDT 9450". On 20 February 1984, they replaced the 333.0 on the Extremadura Expreso (Madrid - Badajoz), on 3 June they also began to be used on the Rias Altas Express (Madrid - A Coruña.) These services ceased in 1986. Next they were to be seen working the Lusitania expreso between Madrid and Talavera de la Reina.

In 1986 the machines are upgraded for 200 km/h operations making them the fastest in Spain at that time, in 1988, when Renfe decides to reduce the maximum speed the Japanese designed locomotives to 140 km/h the Class 354 along with the Renfe Class 250 become the only machines that can to ensure operations at 160 km/h.

In 1989 a study is undertaken to convert them to normal operations, but does not proceed very far.

In 1990 they start to work the TALGO train : Madrid - Gijón. 1993 sees them replacing Class 353 units on the Talgo Mare nostrum between Valencia and Cartagena. The same year sees 354-008 out of commercial service and being used to conduct further high speed tests on the new Madrid - Seville line, the unit returned to commercial service in November of that year. An accident in May 1995 means the same unit will be out of action for a year.

The turn of the century brings a series of serious accidents:

  • 4 October 2001, 354-001 catches fire.
  • 3 June 2003, 354-007 is completely destroyed in collision with the 333-304.
  • 21 May 2004, a head-on collision on Talgo Madrid - Pontevedra - A Coruña line completely destroys 354-002 and 354-003.
  • 4 January, 353-004 derails at Tobarra, requiring repairs.

At the end of this black series of events the three remaining locomotives are confined to the Talgo pendular between Madrid and Badajoz, and Madrid and Cartagena.

Fleet details

[edit]

Like all Talgo locomotives, the Class 354 received names[1]

Renfe Number
UIC 		Name Manufacturer Manufacturer's number Built Retired
354-001-0 Virgen de Covadonga Krauss-Maffei 19904 1982 2009
354-002-8 Virgen de la Macarena 19905 1983 2004
354-003-6 Virgen de la Encarnación 19906 1983 2004
354-004-4 Virgen de Guadalupe 19907 1983 2003
354-005-1 Virgen del Pilar 19908 1983 2001
354-006-9 Virgen de Aranzazu 19909 1984 2009
354-007-7 Virgen de Begoña 19910 1984 2003
354-008-5 Virgen de Montserrat 19911 1984 2009

See also

[edit]

Notes

[edit]
  1. ^ The Renfe Class 340 (also a twin engine/transmission Krauss-Maffei machine) with 4,000 hp (3,000 kW) was nearly as powerful.
  2. ^ The Class 354 has no auxiliary generator for train supply, auxiliary generators being provided in parts of the Talgo pendular units themselves.

References

[edit]
  1. ^ a b "Renfe Operadora - 354", www.listadotren.es (in Spanish), retrieved 17 July 2011
  2. ^ a b c "The conception and experience of high-speed railways in Spain" (PDF), www.aecfrance.eu, Association Européenne des Cheminots
  3. ^ "Serie 354 Talgo", www.wefer.com (in Spanish), retrieved 17 July 2011
  4. ^ "Comparativa entre las locomotoras series 334, 354, y 333-400 de Renfe" [Comparison of Renfe locomotives of class 334, 333.4 and 354]. vialibre-ffe.com.

Literature

[edit]
Wikimedia Commons has media related to Renfe Class 354.
  • Galan Eruste, Manuel (January 2005). "Talgo, unas maquinas desafortunadas". Maquetren. No. 143.
  • Salmeron i Bosch, Carles (1985). Las locomotoras de España. Barcelona: Editorial Terminus.
[edit]

Retrieved from "https://en.wikipedia.org/w/index.php?title=Renfe_Class_354&oldid=1213764176"