Pool skimmer diy

I saw a remote controlled skimmer at the pool store and thought I could make something similar. I've made a few different versions. I thought I'd put the various parts here in case someone was looking to make something like it. When I added the "sweep" sections, which also hold the weir door, I just solvent welded them to net holder parts with MEK (they were printed in PETG). The frame of my skimmer is 1/2 inch PVC. The various 3D printed parts are designed to slide onto the PVC. I…

I have an above ground pool and keeping it clean is often difficult because there are trees hanging over it as you can see by the shade in the picture. I have the pump nozzle set to make the water…

DIY Pool / Skimmer by __T__O__M__

Effortless Pool Skimmer - Easy to Make: Skimming your pool can be a tiresome and monotonous task, yet necessary to keep your pool sparkling clean. This daily task can add up quickly in time and effort. Five minutes a day, averaging four months during the pool season can quickly exceed 10…

Skimmer Leaf Trap: The Problem: Leaves floating on the surface of the pool will clog your skimmers. The tannins in the leaves turn your skimmer basket and piping brown. And then, when you clean out the skimmer, stray leaves get sucked down the pipe. The Solution: I us…

Our DIY Pool Heater is under $150.00 and it's a perfect addition to your above ground pool. It’s sure to keep you warm and swimming all summer long.

Here's the step-by-step process to increase the suction of your pool skimmer and keep your swimming pool clean.

Do you want to build a DIY Pool slide for fun times? You have arrived at the right place. We have listed 15 amazingly outstanding plans that you can try out. A