The stack probes options changed from taking a boolean to a set
of options. For the moment, use `inline-or-call` for both x86_64
and arm64, since that is what the x86 builtin targets moved to
and since we had it enabled for arm64 too (although note that
arm64 does not have it in the builtin target).

This also raises the minimum version of `rustc` to 2021-01-24,
which is just a few days from the previous one (2021-01-21), which
is easier than trying to support both formats.

Triggered by #84.

Signed-off-by: Miguel Ojeda <ojeda@kernel.org>

IPv6 addresses which are used for tunnels are stored in a hash table
with reference counting. When a new GRE tunnel is configured, the driver
is notified and configures it in hardware.

Currently, any change in the tunnel is not applied in the driver. It
means that if the remote address is changed, the driver is not aware of
this change and the first address will be used.

This behavior results in a warning [1] in scenarios such as the
following:

 # ip link add name gre1 type ip6gre local 2000::3 remote 2000::fffe tos inherit ttl inherit
 # ip link set name gre1 type ip6gre local 2000::3 remote 2000::ffff ttl inherit
 # ip link delete gre1

The change of the address is not applied in the driver. Currently, the
driver uses the remote address which is stored in the 'parms' of the
overlay device. When the tunnel is removed, the new IPv6 address is
used, the driver tries to release it, but as it is not aware of the
change, this address is not configured and it warns about releasing non
existing IPv6 address.

Fix it by using the IPv6 address which is cached in the IPIP entry, this
address is the last one that the driver used, so even in cases such the
above, the first address will be released, without any warning.

[1]:

WARNING: CPU: 1 PID: 2197 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2920 mlxsw_sp_ipv6_addr_put+0x146/0x220 [mlxsw_spectrum]
...
CPU: 1 PID: 2197 Comm: ip Not tainted 5.17.0-rc8-custom-95062-gc1e5ded51a9a #84
Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021
RIP: 0010:mlxsw_sp_ipv6_addr_put+0x146/0x220 [mlxsw_spectrum]
...
Call Trace:
 <TASK>
 mlxsw_sp2_ipip_rem_addr_unset_gre6+0xf1/0x120 [mlxsw_spectrum]
 mlxsw_sp_netdevice_ipip_ol_event+0xdb/0x640 [mlxsw_spectrum]
 mlxsw_sp_netdevice_event+0xc4/0x850 [mlxsw_spectrum]
 raw_notifier_call_chain+0x3c/0x50
 call_netdevice_notifiers_info+0x2f/0x80
 unregister_netdevice_many+0x311/0x6d0
 rtnl_dellink+0x136/0x360
 rtnetlink_rcv_msg+0x12f/0x380
 netlink_rcv_skb+0x49/0xf0
 netlink_unicast+0x233/0x340
 netlink_sendmsg+0x202/0x440
 ____sys_sendmsg+0x1f3/0x220
 ___sys_sendmsg+0x70/0xb0
 __sys_sendmsg+0x54/0xa0
 do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fixes: e846efe ("mlxsw: spectrum: Add hash table for IPv6 address mapping")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220511115747.238602-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Many devices with a single alternate setting do not have a Valid
Alternate Setting Control and validation performed by
validate_sample_rate_table_v2v3() doesn't work on them and is not
really needed. So check the presense of control before sending
altsetting validation requests.

MOTU Microbook IIc is suffering the most without this check. It
takes up to 40 seconds to bootup due to how slow it switches
sampling rates:

[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60
[ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2659.164829] usb 3-2: Product: MicroBook IIc
[ 2659.164830] usb 3-2: Manufacturer: MOTU
[ 2659.166204] usb 3-2: Found last interface = 3
[ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug
[ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3
[ 2679.322321] usb 3-2: Creating new data endpoint #3
[ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1
[ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110
[ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug
[ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84
[ 2694.444721] usb 3-2: Creating new data endpoint #84
[ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>

[ Upstream commit 1c82587 ]

Devices block sizes may change. One of these cases is a loop device by
using ioctl LOOP_SET_BLOCK_SIZE.

While this may cause other issues like IO being rejected, in the case of
hfsplus, it will allocate a block by using that size and potentially write
out-of-bounds when hfsplus_read_wrapper calls hfsplus_submit_bio and the
latter function reads a different io_size.

Using a new min_io_size initally set to sb_min_blocksize works for the
purposes of the original fix, since it will be set to the max between
HFSPLUS_SECTOR_SIZE and the first seen logical block size. We still use the
max between HFSPLUS_SECTOR_SIZE and min_io_size in case the latter is not
initialized.

Tested by mounting an hfsplus filesystem with loop block sizes 512, 1024
and 4096.

The produced KASAN report before the fix looks like this:

[  419.944641] ==================================================================
[  419.945655] BUG: KASAN: slab-use-after-free in hfsplus_read_wrapper+0x659/0xa0a
[  419.946703] Read of size 2 at addr ffff88800721fc00 by task repro/10678
[  419.947612]
[  419.947846] CPU: 0 UID: 0 PID: 10678 Comm: repro Not tainted 6.12.0-rc5-00008-gdf56e0f2f3ca Rust-for-Linux#84
[  419.949007] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[  419.950035] Call Trace:
[  419.950384]  <TASK>
[  419.950676]  dump_stack_lvl+0x57/0x78
[  419.951212]  ? hfsplus_read_wrapper+0x659/0xa0a
[  419.951830]  print_report+0x14c/0x49e
[  419.952361]  ? __virt_addr_valid+0x267/0x278
[  419.952979]  ? kmem_cache_debug_flags+0xc/0x1d
[  419.953561]  ? hfsplus_read_wrapper+0x659/0xa0a
[  419.954231]  kasan_report+0x89/0xb0
[  419.954748]  ? hfsplus_read_wrapper+0x659/0xa0a
[  419.955367]  hfsplus_read_wrapper+0x659/0xa0a
[  419.955948]  ? __pfx_hfsplus_read_wrapper+0x10/0x10
[  419.956618]  ? do_raw_spin_unlock+0x59/0x1a9
[  419.957214]  ? _raw_spin_unlock+0x1a/0x2e
[  419.957772]  hfsplus_fill_super+0x348/0x1590
[  419.958355]  ? hlock_class+0x4c/0x109
[  419.958867]  ? __pfx_hfsplus_fill_super+0x10/0x10
[  419.959499]  ? __pfx_string+0x10/0x10
[  419.960006]  ? lock_acquire+0x3e2/0x454
[  419.960532]  ? bdev_name.constprop.0+0xce/0x243
[  419.961129]  ? __pfx_bdev_name.constprop.0+0x10/0x10
[  419.961799]  ? pointer+0x3f0/0x62f
[  419.962277]  ? __pfx_pointer+0x10/0x10
[  419.962761]  ? vsnprintf+0x6c4/0xfba
[  419.963178]  ? __pfx_vsnprintf+0x10/0x10
[  419.963621]  ? setup_bdev_super+0x376/0x3b3
[  419.964029]  ? snprintf+0x9d/0xd2
[  419.964344]  ? __pfx_snprintf+0x10/0x10
[  419.964675]  ? lock_acquired+0x45c/0x5e9
[  419.965016]  ? set_blocksize+0x139/0x1c1
[  419.965381]  ? sb_set_blocksize+0x6d/0xae
[  419.965742]  ? __pfx_hfsplus_fill_super+0x10/0x10
[  419.966179]  mount_bdev+0x12f/0x1bf
[  419.966512]  ? __pfx_mount_bdev+0x10/0x10
[  419.966886]  ? vfs_parse_fs_string+0xce/0x111
[  419.967293]  ? __pfx_vfs_parse_fs_string+0x10/0x10
[  419.967702]  ? __pfx_hfsplus_mount+0x10/0x10
[  419.968073]  legacy_get_tree+0x104/0x178
[  419.968414]  vfs_get_tree+0x86/0x296
[  419.968751]  path_mount+0xba3/0xd0b
[  419.969157]  ? __pfx_path_mount+0x10/0x10
[  419.969594]  ? kmem_cache_free+0x1e2/0x260
[  419.970311]  do_mount+0x99/0xe0
[  419.970630]  ? __pfx_do_mount+0x10/0x10
[  419.971008]  __do_sys_mount+0x199/0x1c9
[  419.971397]  do_syscall_64+0xd0/0x135
[  419.971761]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  419.972233] RIP: 0033:0x7c3cb812972e
[  419.972564] Code: 48 8b 0d f5 46 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c2 46 0d 00 f7 d8 64 89 01 48
[  419.974371] RSP: 002b:00007ffe30632548 EFLAGS: 00000286 ORIG_RAX: 00000000000000a5
[  419.975048] RAX: ffffffffffffffda RBX: 00007ffe306328d8 RCX: 00007c3cb812972e
[  419.975701] RDX: 0000000020000000 RSI: 0000000020000c80 RDI: 00007ffe306325d0
[  419.976363] RBP: 00007ffe30632720 R08: 00007ffe30632610 R09: 0000000000000000
[  419.977034] R10: 0000000000200008 R11: 0000000000000286 R12: 0000000000000000
[  419.977713] R13: 00007ffe306328e8 R14: 00005a0eb298bc68 R15: 00007c3cb8356000
[  419.978375]  </TASK>
[  419.978589]

Fixes: 6596528 ("hfsplus: ensure bio requests are not smaller than the hardware sectors")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://lore.kernel.org/r/20241107114109.839253-1-cascardo@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>