home-assistant · infamy · Feb 13, 2016 · Feb 13, 2016 · Feb 13, 2016 · Feb 13, 2016
diff --git a/sass/custom/_paulus.scss b/sass/custom/_paulus.scss
@@ -13,6 +13,7 @@
     text-transform: uppercase;
     white-space: nowrap;
     display: inline-block;
+    font-weight: bold;
   }
 
   .front-install {

diff --git a/sass/oscailte/homepage/_hero_unit.scss b/sass/oscailte/homepage/_hero_unit.scss
@@ -7,7 +7,6 @@
           background-size: cover;
   border-bottom: 1px solid $white;
   color: $white;
-  font-weight: bold;
   margin-top: -2em;
   margin-bottom: 1.5em;
   padding: 50px 0;

diff --git a/source/_components/browser.markdown b/source/_components/browser.markdown
@@ -7,7 +7,7 @@ sidebar: true
 comments: false
 sharing: true
 footer: true
-logo: browser.png
+logo: home-assistant.png
 ha_category: Other
 ---
 

diff --git a/source/_components/conversation.markdown b/source/_components/conversation.markdown
@@ -7,7 +7,7 @@ sidebar: true
 comments: false
 sharing: true
 footer: true
-logo: conversation.png
+logo: home-assistant.png
 ha_category: "Voice"
 ---
 

diff --git a/source/_components/device_tracker.icloud.markdown b/source/_components/device_tracker.icloud.markdown
@@ -14,7 +14,7 @@ ha_category: Presence Detection
 
 The `icloud` platform allows you to detect presence using the [iCloud](https://www.icloud.com/) service. iCloud allows users to track their location on iOS devices. 
 
-It does require that your device has beend registered with "Find My iPhone".
+It does require that your device is registered with "Find My iPhone".
 
 To integrate iCloud in Home Assistant, add the following section to your `configuration.yaml` file:
 

diff --git a/source/_components/downloader.markdown b/source/_components/downloader.markdown
@@ -7,7 +7,7 @@ sidebar: true
 comments: false
 sharing: true
 footer: true
-logo: downloader.png
+logo: home-assistant.png
 ha_category: Other
 ---
 

diff --git a/source/_components/garage_door.wink.markdown b/source/_components/garage_door.wink.markdown
@@ -14,5 +14,5 @@ ha_category: Garage Door
 
 The Wink garage door platform allows you to control your [Wink](http://www.wink.com/) enabled garage door.
 
-The requirement is that you have setup your [Wink hub](/components/light.wink/).
+The requirement is that you have setup your [Wink hub](/components/wink/).
 
diff --git a/source/_components/light.lifx.markdown b/source/_components/light.lifx.markdown
@@ -24,5 +24,5 @@ light:
 Configuration variables:
 
 - **server** (*Optional*): Your server address. Only needed if using more than one network interface. Omit if you are unsure.
-- **consumer_secret** (*Optional*): The broadcast address, set to reach all LIFX bulbs.
+- **broadcast** (*Optional*): The broadcast address, set to reach all LIFX bulbs.
 
diff --git a/source/_components/light.mysensors.markdown b/source/_components/light.mysensors.markdown
@@ -2,7 +2,7 @@
 layout: page
 title: "MySensors Light"
 description: "Instructions how to integrate MySensors lights into Home Assistant."
-date: 2016-01-17 15:49
+date: 2016-02-15 17:37 +0100
 sidebar: true
 comments: false
 sharing: true
@@ -13,3 +13,25 @@ featured: false
 ---
 
 Integrates MySensors lights into Home Assistant. See the [main component] for configuration instructions.
+
+The following actuator types are supported:
+
+##### MySensors version 1.4 and higher
+
+S_TYPE   | V_TYPE
+---------|--------------
+S_LIGHT  | V_LIGHT
+S_DIMMER | V_DIMMER
+
+##### MySensors version 1.5 and higher
+
+S_TYPE      | V_TYPE
+------------|-------------
+S_LIGHT     | V_STATUS
+S_DIMMER    | V_PERCENTAGE
+S_RGB_LIGHT | V_RGB
+
+For more information, visit the [serial api] of MySensors.
+
+[main component]: /components/mysensors/
+[serial api]: https://www.mysensors.org/download/serial_api_15
diff --git a/source/_components/light.wink.markdown b/source/_components/light.wink.markdown
@@ -14,4 +14,4 @@ ha_category: Light
 
 The wink light platform allows you to use your [Wink](http://www.wink.com/) lights.
 
-The requirement is that you have setup your [Wink hub](/components/light.wink/).
+The requirement is that you have setup your [Wink hub](/components/wink/).
diff --git a/source/_components/lock.verisure.markdown b/source/_components/lock.verisure.markdown
@@ -7,7 +7,7 @@ sidebar: true
 comments: false
 sharing: true
 footer: true
-logo: wink.png
+logo: verisure.png
 ha_category: Lock
 ---
 

diff --git a/source/_components/media_player.kodi.markdown b/source/_components/media_player.kodi.markdown
@@ -21,7 +21,7 @@ To add Kodi to your installation, add the following to your `configuration.yaml`
 # Example configuration.yaml entry
 media_player:
   platform: kodi
-  host: 192.168.0.123
+  host: http://192.168.0.123
   port: 8080
   name: Kodi
   user: USERNAME

diff --git a/source/_components/media_player.samsungtv.markdown b/source/_components/media_player.samsungtv.markdown
@@ -1,8 +1,8 @@
 ---
 layout: page
-title: "Samsung TV"
-description: "Instructions how to integrate a Samsung TV in Home Assistant."
-date: 2016-02-01 19:00
+title: "Samsung Smart TV"
+description: "Instructions on how to integrate a Samsung Smart TV into Home Assistant."
+date: 2016-02-13 12:02
 sidebar: true
 comments: false
 sharing: true
@@ -12,14 +12,30 @@ ha_category: Media Player
 featured: false
 ---
 
-The `samsungtv` platform allows you to control an [Samsung TV](http://www.samsung.com).
+The `samsungtv` platform allows you to control a [Samsung Smart TV](http://www.samsung.com/uk/consumer/tv-audio-video/televisions/).
 
+When the TV is first connected, you will need to accept Home Assistant on the TV to allow communication.
 
-To add an Samsung TV to your installation, add the following to your `configuration.yaml` file:
+To add a TV to your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
 # Example configuration.yaml entry
 media_player:
   platform: samsungtv
+  host: 192.168.0.10
+  name: Living Room TV
 ```
 
+Configuration variables:
+
+- **host** *Required*: The IP of the Samsung Smart TV, e.g. 192.168.0.10
+- **name** *Optional*: The name you would like to give to the Samsung Smart TV.
+
+
+Currently known supported models:
+
+- ES5500
+- C7700
+
+If your model is not on the list then give it a test, if everything works correctly then add it to the list on [GitHub](https://github.com/balloob/home-assistant.io).
+The two letters at the beginning of the model number represent the region, UE is Europe, UN is North America and UA is Asia & Australia. The two numbers following that represent the screen size. If you add your model remember to remove these before adding them to the list.
diff --git a/source/_components/media_player.snapcast.markdown b/source/_components/media_player.snapcast.markdown
@@ -1,7 +1,7 @@
 ---
 layout: page
-title: "snapcast"
-description: "Instructions how to integrate a snapcast in Home Assistant."
+title: "SnapCast"
+description: "Instructions on how to integrate SnapCast into Home Assistant."
 date: 2016-02-01 19:00
 sidebar: true
 comments: false
@@ -12,9 +12,9 @@ ha_category: Media Player
 featured: false
 ---
 
-The `snapcast` platform allows you to control [Snapcast](https://github.com/badaix/snapcast).
+The `snapcast` platform allows you to control [SnapCast](https://github.com/badaix/snapcast) from Home Assistant.
 
-To add Snapcast to your installation, add the following to your `configuration.yaml` file:
+To add SnapCast to your installation, add the following to your `configuration.yaml` file:
 
 ```yaml
 # Example configuration.yaml entry

diff --git a/source/_components/mysensors.markdown b/source/_components/mysensors.markdown
@@ -2,7 +2,7 @@
 layout: page
 title: "MySensors"
 description: "Instructions how to integrate MySensors sensors into Home Assistant."
-date: 2015-05-14 21:57
+date: 2016-02-15 17:37 +0100
 sidebar: true
 comments: false
 sharing: true
@@ -12,9 +12,9 @@ ha_category: Hub
 featured: true
 ---
 
-The [MySensors](https://www.mysensors.org) project combines Arduino boards with NRF24L01 radio boards to build sensor networks. The component will automatically add all available switches and sensors to Home Assistant.
+The [MySensors](https://www.mysensors.org) project combines Arduino boards with NRF24L01 radio boards to build sensor networks. The component will automatically add all available devices to Home Assistant, after [presentation](#presentation) is done.
 
-### Configuration
+### {% linkable_title Configuration %}
 
 Integrate your Serial MySensors Gateway by adding the following to your `configuration.yaml` file:
 
@@ -40,15 +40,15 @@ Configuration variables:
 - **persistence** (*Optional*): Enable or disable local persistence of sensor information. If this is disabled, then each sensor will need to send presentation messages after Home Assistant starts. Default is true.
 - **persistence_file** (*Optional*): Path to a file to save sensor information. The file extension determines the file type. Currently supported file types are 'pickle' and 'json'.
 - **version** (*Optional*): Specifies the MySensors protocol version to use. Supports 1.4 and 1.5. Default is 1.4.
-- **baud_rate** (*Optional*): Specifies baud rate of the connected gateway.
+- **baud_rate** (*Optional*): Specifies baud rate of the connected gateway. Default is 115200.
 
 If you are using an original Arduino the port will be named `ttyACM*`. The exact number can be determined with the command shown below.
 
 ```bash
 $ ls /dev/ttyACM*
 ```
 
-### Presentation
+### {% linkable_title Presentation %}
 
 Present a MySensors sensor or actuator, by following these steps:
 

diff --git a/source/_components/sensor.neurio_energy.markdown b/source/_components/sensor.neurio_energy.markdown
@@ -0,0 +1,30 @@
+---
+layout: page
+title: "Neurio"
+description: "Instructions how to integrate Neurio within Home Assistant."
+date: 2016-02-15 21:50
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: neurio.png
+ha_category: Sensor
+---
+
+
+Integrate your [Neurio](http://neur.io/) meter information into Home Assistant. To get an API key and secret, login to your Neurio account at https://my.neur.io/#settings/applications/register and register an application. Note the Homepage URL and Callback URL are optional.
+
+```yaml
+# Example configuration.yaml entry
+sensor:
+  platform: neurio_energy
+  api_key: API_KEY
+  api_secret: API_SECRET
+  sensor_id: "SENSOR_ID"
+```
+
+Configuration variables:
+
+- **api_key** (*Required*): The API key for your account/application.
+- **api_secret** (*Required*): The API secret for your account/application.
+- **sensor_id** (*Optional*): Sensor ID, will be auto-detected but can be set if you have more then one sensor.
diff --git a/source/_components/sensor.speedtest.markdown b/source/_components/sensor.speedtest.markdown
@@ -14,9 +14,9 @@ featured: false
 
 The `speedtest` sensor component uses the [Speedtest.net](https://speedtest.net/) web service to measure network bandwidth performance.
 
-By default, it will run every hour on the hour.  The user can change the update frequency in the config by defining the minute, hour, and day for speedtest to run.
+By default, it will run every hour.  The user can change the update frequency in the config by defining the minute, hour, and day for a speedtest to run.
 
-To add speedtest.net sensors to your installation, add the following to your `configuration.yaml` file:
+To add a Speedtest.net sensor to your installation, add the following to your `configuration.yaml` file:
 
 Once per hour, on the hour (default):
 
@@ -65,11 +65,11 @@ sensor:
 Configuration variables:
 
 - **monitored_conditions** array (*Required*): Sensors to display in the frontend.
-  - **ping**: Reaction time in ms of your connection–how fast you get a response after you've sent out a request.
+  - **ping**: Reaction time in ms of your connection, (how fast you get a response after you've sent out a request).
   - **download**: Download speed in Mbps.
   - **upload**: Upload speed in Mbps.
 - **minute** (*Optional*): Specify the minute(s) of the hour to schedule the speedtest. Use a list for multiple entries. Default is 0.
 - **hour** (*Optional*): Specify the hour(s) of the day to schedule the speedtest. Use a list for multiple entries. Default is None.
 - **day** (*Optional*): Specify the day(s) of the month to schedule the speedtest. Use a list for multiple entries. Default is None.
 
-This component uses [speetest-cli](https://github.com/sivel/speedtest-cli) to gather network performance data from speedtest.net.  Please be aware of the potential [inconsistencies](https://github.com/sivel/speedtest-cli#inconsistency) that this component may display.
+This component uses [speetest-cli](https://github.com/sivel/speedtest-cli) to gather network performance data from Speedtest.net.  Please be aware of the potential [inconsistencies](https://github.com/sivel/speedtest-cli#inconsistency) that this component may display.
diff --git a/source/_components/sensor.time_date.markdown b/source/_components/sensor.time_date.markdown
@@ -7,6 +7,7 @@ sidebar: true
 comments: false
 sharing: true
 footer: true
+logo: home-assistant.png
 ha_category: Sensor
 ---
 

diff --git a/source/_components/sensor.wink.markdown b/source/_components/sensor.wink.markdown
@@ -14,5 +14,5 @@ ha_category: Sensor
 
 The Wink sensor platform allows you to get data from your [Wink](http://www.wink.com/) sensors.
 
-The requirement is that you have setup your [Wink hub](/components/light.wink/).
+The requirement is that you have setup your [Wink hub](/components/wink/).
 
diff --git a/source/_components/sensor.worldclock.markdown b/source/_components/sensor.worldclock.markdown
@@ -7,6 +7,7 @@ sidebar: true
 comments: false
 sharing: true
 footer: true
+logo: home-assistant.png
 ha_category: Sensor
 ---
 

diff --git a/source/_components/simple_alarm.markdown b/source/_components/simple_alarm.markdown
@@ -27,6 +27,6 @@ simple_alarm:
 
 Configuration variables:
 
-- **known_light** (*Required*): Which light/light group has to flash when a known device comes home.
-- **unknown_light** (*Required*): Which light/light group has to flash red when light turns on while no one home.
+- **known_light** (*Optional*): Which light/light group has to flash when a known device comes home.
+- **unknown_light** (*Optional*): Which light/light group has to flash red when light turns on while no one home.
 
diff --git a/source/_components/sun.markdown b/source/_components/sun.markdown
@@ -7,7 +7,7 @@ sidebar: true
 comments: false
 sharing: true
 footer: true
-logo: sun.png
+logo: home-assistant.png
 ha_category: Weather
 ---
 

diff --git a/source/_components/switch.mysensors.markdown b/source/_components/switch.mysensors.markdown
@@ -2,7 +2,7 @@
 layout: page
 title: "MySensors Switch"
 description: "Instructions how to integrate MySensors switches into Home Assistant."
-date: 2016-01-17 15:49
+date: 2016-02-15 20:49 +0100
 sidebar: true
 comments: false
 sharing: true
@@ -23,14 +23,12 @@ S_TYPE   | V_TYPE
 S_DOOR   | V_ARMED
 S_MOTION | V_ARMED
 S_SMOKE  | V_ARMED
-S_LIGHT  | V_LIGHT
 S_LOCK   | V_LOCK_STATUS
 
 ##### MySensors version 1.5 and higher
 
 S_TYPE       | V_TYPE
 -------------|------------------
-S_LIGHT      | V_STATUS
 S_BINARY     | V_STATUS, V_LIGHT
 S_SPRINKLER  | V_STATUS
 S_WATER_LEAK | V_ARMED

diff --git a/source/_components/switch.wink.markdown b/source/_components/switch.wink.markdown
@@ -14,5 +14,5 @@ ha_category: Switch
 
 The Wink switch platform allows you to control your [Wink](http://www.wink.com/) switches.
 
-The requirement is that you have setup your [Wink hub](/components/light.wink/).
+The requirement is that you have setup your [Wink hub](/components/wink/).
 
diff --git a/source/_components/updater.markdown b/source/_components/updater.markdown
@@ -7,7 +7,7 @@ sidebar: true
 comments: false
 sharing: true
 footer: true
-logo: updater.png
+logo: home-assistant.png
 ha_category: Other
 ---
 

diff --git a/source/_components/verisure.markdown b/source/_components/verisure.markdown
@@ -17,9 +17,9 @@ Home Assistant has support to integrate your [Verisure](https://www.verisure.com
 
 We support:
 
+ * Alarm
  * Smartplugs
  * Reading from thermometers and hygrometers integrated in various devices
- * Reading alarm status
  * Locks 
 
 To integrate Verisure with Home Assistant, add the following section to your `configuration.yaml` file:
@@ -44,7 +44,7 @@ Configuration variables:
 - **alarm** (*Optional*): Set to 1 to show alarm, 0 to disable. Default 1.
 - **hygrometers** (*Optional*): Set to 1 to show hygrometers, 0 to disable. Default 1.
 - **smartplugs** (*Optional*): Set to 1 to show smartplugs, 0 to disable. Default 1.
-- **locls** (*Optional*): Set to 1 to show locks, 0 to disable. Default 1.
+- **locks** (*Optional*): Set to 1 to show locks, 0 to disable. Default 1.
 - **thermometers** (*Optional*): Set to 1 to show thermometers, 0 to disable. Default 1.
 - **code_digits** (*Optional*): Number of digits in PIN code. Default 4.
Original file line number	Diff line number	Diff line change
Expand Up		@@ -14,5 +14,5 @@ ha_category: Garage Door

		The Wink garage door platform allows you to control your [Wink](http://www.wink.com/) enabled garage door.

		The requirement is that you have setup your [Wink hub](/components/light.wink/).
		The requirement is that you have setup your [Wink hub](/components/wink/).
Original file line number	Diff line number	Diff line change
Expand Up		@@ -14,4 +14,4 @@ ha_category: Light

		The wink light platform allows you to use your [Wink](http://www.wink.com/) lights.

		The requirement is that you have setup your [Wink hub](/components/light.wink/).
		The requirement is that you have setup your [Wink hub](/components/wink/).
Original file line number	Diff line number	Diff line change
Expand Up		@@ -14,5 +14,5 @@ ha_category: Sensor

		The Wink sensor platform allows you to get data from your [Wink](http://www.wink.com/) sensors.

		The requirement is that you have setup your [Wink hub](/components/light.wink/).
		The requirement is that you have setup your [Wink hub](/components/wink/).
Original file line number	Diff line number	Diff line change
Expand Up		@@ -14,5 +14,5 @@ ha_category: Switch

		The Wink switch platform allows you to control your [Wink](http://www.wink.com/) switches.

		The requirement is that you have setup your [Wink hub](/components/light.wink/).
		The requirement is that you have setup your [Wink hub](/components/wink/).