Introduction

This library is for using CircuitPython with e-ink displays with built in SRAM.

Dependencies

This driver depends on:

• Adafruit CircuitPython
• Bus Device

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Usage Example

import digitalio
import busio
import board
from adafruit_epd.epd import Adafruit_EPD
from adafruit_epd.il0373 import Adafruit_IL0373

# create the spi device and pins we will need
spi = busio.SPI(board.SCK, MOSI=board.MOSI, MISO=board.MISO)
ecs = digitalio.DigitalInOut(board.D10)
dc = digitalio.DigitalInOut(board.D9)
srcs = digitalio.DigitalInOut(board.D8)
rst = digitalio.DigitalInOut(board.D7)
busy = digitalio.DigitalInOut(board.D6)

# give them all to our driver
display = Adafruit_IL0373(152, 152, rst, dc, busy, srcs, ecs, spi)

# clear the buffer
display.clear_buffer()

r_width = 5
r_pos = display.height

#draw some rectangles!
color = Adafruit_EPD.BLACK
while r_pos > display.height/2:
    if r_pos < display.height - 50:
        color = Adafruit_EPD.RED
    display.rect(display.width - r_pos, display.height - r_pos,
                display.width - 2*(display.width - r_pos),
                display.height - 2*(display.height - r_pos), color)
    r_pos = r_pos - r_width

display.display()

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.

Building locally

Zip release files

To build this library locally you'll need to install the circuitpython-build-tools package.

python3 -m venv .env
source .env/bin/activate
pip install circuitpython-build-tools

Once installed, make sure you are in the virtual environment:

source .env/bin/activate

Then run the build:

circuitpython-build-bundles --filename_prefix adafruit-circuitpython-epd --library_location .

Sphinx documentation

Sphinx is used to build the documentation based on rST files and comments in the code. First, install dependencies (feel free to reuse the virtual environment from above):

python3 -m venv .env
source .env/bin/activate
pip install Sphinx sphinx-rtd-theme

Now, once you have the virtual environment activated:

cd docs
sphinx-build -E -W -b html . _build/html

This will output the documentation to docs/_build/html. Open the index.html in your browser to view them. It will also (due to -W) error out on any warning like Travis will. This is a good way to locally verify it will pass.