Add supported services (home-assistant#1249)

jnimmo · Landrash · commit 44c12e1ba173 · 2016-11-18T21:01:55.000+01:00
To document the new alarm_keypress
* Add supported services
* Update envisalink.markdown
diff --git a/source/_components/envisalink.markdown b/source/_components/envisalink.markdown
@@ -69,3 +69,12 @@ Configuration variables:
 - **zones** (*Optional*): Envisalink boards have no way to tell us which zones are actually in use, so each zone must be configured in Home Assistant. For each zone, at least a name must be given. For more information on the available zone types, take a look at the [Binary Sensor](/components/binary_sensor.envisalink/) docs. *Note: If no zones are specified, Home Assistant will not load any binary_sensor components.*
 - **partitions** (*Optional*): Again, Envisalink boards do not tell us what is in use and what is not, so each partition must be configured with a partition name. If no partition parameter is specified, then no alarm_panel or sensor components are loaded.
 
+Supported services:
+
+The following services are supported by Envisalink and can be used to script or automate the alarm.
+
+- **alarm_disarm**: Disarms the alarm with the user code provided, or the code specified in the configuration.
+- **alarm_arm_home**: Arms the alarm in home mode.
+- **alarm_arm_away**: Arms the alarm in standard away mode.
+- **alarm_trigger**: Trigger an alarm on the Envisalink connected alarm system. For example, a newer zwave/zigbee sensor can now be integrated into a legacy alarm system using a Home Assistant automation.
+- **alarm_keypress**: Sends a string of up to 6 characters to the alarm. *DSC alarms only*
