Code size report:

   bare-arm:    +0 +0.000% 
minimal x86:    +0 +0.000% 
   unix x64:    +0 +0.000% standard
      stm32:    +0 +0.000% PYBV10
     mimxrt:    +0 +0.000% TEENSY40
        rp2:    +0 +0.000% RPI_PICO_W
       samd:    +0 +0.000% ADAFRUIT_ITSYBITSY_M4_EXPRESS
  qemu rv32:    +0 +0.000% VIRT_RV32

Hi, I notice that in the board definition files, you have defined the external flash size as 16 MByte.

However, my understanding was that the flash size is the same as the W5500-EVB-pico, i.e. 2MByte. Also the schematic for the W5500-EVB-Pico2 (see https://docs.wiznet.io/Product/iEthernet/W5500/w5500-evb-pico2#schematic) shows the flash to be a W25Q16JV, a 16Mbit part, i.e 2MByte.

Dear byzantic,

Thank you for your advice and for pointing out the issue with the flash size definition. You are absolutely correct, and I sincerely apologize for the oversight.

The flash size for the W5500-EVB-Pico2 / W5100S-EVB-Pico2 is indeed 2MByte, as the schematic indicates with the W25Q16JV flash, which is a 2MByte(16Mbit ). I have updated the mpconfigboard.h files to reflect the correct flash size.
and I’ve also completed the testing after the modification.

I truly appreciate your attention to detail and for bringing this to my attention. Thanks again for your help in ensuring the accuracy of the board configuration.

Best regards
Grace

Hi, I notice that in the board definition files, you have defined the external flash size as 16 MByte.

However, my understanding was that the flash size is the same as the W5500-EVB-pico, i.e. 2MByte. Also the schematic for the W5500-EVB-Pico2 (see https://docs.wiznet.io/Product/iEthernet/W5500/w5500-evb-pico2#schematic) shows the flash to be a W25Q16JV, a 16Mbit part, i.e 2MByte.

I may be a bit confused, but are there remaining changes needed for this PR? Looking forward to getting this board supported!

I may be a bit confused, but are there remaining changes needed for this PR? Looking forward to getting this board supported!

Sorry for the late reply, and thank you so much for your interest!

This PR is still active and there are no pending changes at the moment.
If there's anything that needs to be fixed or adjusted, we’d really appreciate your feedback.

Thanks again for checking in — we really appreciate the support!
Grace