## [0.10.0](https://github.com/python-kasa/python-kasa/tree/0.10.0) (2025-01-26)

[Full Changelog](0.9.1...0.10.0)

**Release summary:**

This release brings support for many new devices, including completely new device types:

- Support for Tapo robot vacuums. Special thanks to @steveredden, @MAXIGAMESSUPPER, and veep60 for helping to get this implemented!
- Support for hub attached cameras and doorbells (H200)
- Improved support for hubs (including pairing & better chime controls)
- Support for many new camera and doorbell device models, including C220, C720, D100C, D130, and D230

Many thanks to testers and new contributors - @steveredden, @DawidPietrykowski, @Obbay2, @andrewome, @ryenitcher and @etmmvdp!

**Breaking changes:**

- `uses_http` is now a readonly property of device config. Consumers that relied on `uses_http` to be persisted with `DeviceConfig.to_dict()` will need to store the value separately.
- `is_color`, `is_dimmable`, `is_variable_color_temp`, `valid_temperate_range`, and `has_effects` attributes from the `Light` module are deprecated, consumers should use `has_feature("hsv")`, `has_feature("brightness")`, `has_feature("color_temp")`, `get_feature("color_temp").range`, and `Module.LightEffect in dev.modules` respectively. Calling the deprecated attributes will emit a `DeprecationWarning` and type checkers will fail them.
-  `alarm_volume` on the `smart.Alarm` module is changed from `str` to `int`

**Breaking changes:**

- Make uses\_http a readonly property of device config [\#1449](#1449) (@sdb9696)
- Allow passing alarm parameter overrides [\#1340](#1340) (@rytilahti)
- Deprecate legacy light module is\_capability checks [\#1297](#1297) (@sdb9696)

**Implemented enhancements:**

- Expose more battery sensors for D230 [\#1451](#1451)
- dumping HTTP POST Body for Tapo Vacuum \(RV30 Plus\) [\#937](#937)
- Add common alarm interface [\#1479](#1479) (@sdb9696)
- Add common childsetup interface [\#1470](#1470) (@sdb9696)
- Add childsetup module to smartcam hubs [\#1469](#1469) (@sdb9696)
- Add smartcam pet detection toggle module [\#1465](#1465) (@DawidPietrykowski)
- Only log one warning per unknown clean error code and status [\#1462](#1462) (@rytilahti)
- Add childlock module for vacuums [\#1461](#1461) (@rytilahti)
- Add ultra mode \(fanspeed = 5\) for vacuums [\#1459](#1459) (@rytilahti)
- Add setting to change carpet clean mode [\#1458](#1458) (@rytilahti)
- Add setting to change clean count [\#1457](#1457) (@rytilahti)
- Add mop module [\#1456](#1456) (@rytilahti)
- Enable dynamic hub child creation and deletion on update [\#1454](#1454) (@sdb9696)
- Expose current cleaning information [\#1453](#1453) (@rytilahti)
- Add battery module to smartcam devices [\#1452](#1452) (@sdb9696)
- Allow update of camera modules after setting values [\#1450](#1450) (@sdb9696)
- Update hub children on first update and delay subsequent updates [\#1438](#1438) (@sdb9696)
- Add support for doorbells and chimes [\#1435](#1435) (@steveredden)
- Implement vacuum dustbin module \(dust\_bucket\) [\#1423](#1423) (@rytilahti)
- Allow https for klaptransport [\#1415](#1415) (@rytilahti)
- Add smartcam child device support for smartcam hubs [\#1413](#1413) (@sdb9696)
- Add powerprotection module [\#1337](#1337) (@rytilahti)
- Add vacuum speaker controls [\#1332](#1332) (@rytilahti)
- Add consumables module for vacuums [\#1327](#1327) (@rytilahti)
- Add ADC Value to PIR Enabled Switches [\#1263](#1263) (@ryenitcher)
- Add support for cleaning records [\#945](#945) (@rytilahti)
- Initial support for vacuums \(clean module\) [\#944](#944) (@rytilahti)
- Add support for pairing devices with hubs [\#859](#859) (@rytilahti)

**Fixed bugs:**

- TP-Link HS300 Wi-Fi Power-Strip - "Parent On/Off" not functioning. [\#637](#637)
- Convert carpet\_clean\_mode to carpet\_boost switch [\#1486](#1486) (@rytilahti)
- Change category for empty dustbin feature from Primary to Config [\#1485](#1485) (@rytilahti)
- Report 0 for instead of None for zero current and voltage [\#1483](#1483) (@ryenitcher)
- Disable iot camera creation until more complete [\#1480](#1480) (@sdb9696)
- ssltransport: use debug logger for sending requests [\#1443](#1443) (@rytilahti)
- Fix discover cli command with host [\#1437](#1437) (@sdb9696)
- Fallback to is\_low for batterysensor's battery\_low [\#1420](#1420) (@rytilahti)
- Fix iot strip turn on and off from parent [\#639](#639) (@Obbay2)

**Added support for devices:**

- Add D130\(US\) 1.0 1.1.9 fixture [\#1476](#1476) (@sdb9696)
- Add D100C\(US\) 1.0 1.1.3 fixture [\#1475](#1475) (@sdb9696)
- Add C220\(EU\) 1.0 1.2.2 camera fixture [\#1466](#1466) (@DawidPietrykowski)
- Add D230\(EU\) 1.20 1.1.19 fixture [\#1448](#1448) (@sdb9696)
- Add fixture for C720 camera [\#1433](#1433) (@steveredden)

**Project maintenance:**

- Update ruff to 0.9 [\#1482](#1482) (@sdb9696)
- Cancel in progress CI workflows after new pushes [\#1481](#1481) (@sdb9696)
- Update test framework to support smartcam device discovery. [\#1477](#1477) (@sdb9696)
- Add error code 7 for clean module [\#1474](#1474) (@rytilahti)
- Enable CI workflow on PRs to feat/ fix/ and janitor/ [\#1471](#1471) (@sdb9696)
- Add commit-hook to prettify JSON files [\#1455](#1455) (@rytilahti)
- Add required sphinx.configuration [\#1446](#1446) (@rytilahti)
- Add more redactors for smartcams [\#1439](#1439) (@sdb9696)
- Add KS230\(US\) 2.0 1.0.11 IOT Fixture [\#1430](#1430) (@ZeliardM)
- Add tests for dump\_devinfo parent/child smartcam fixture generation [\#1428](#1428) (@sdb9696)
- Raise errors on single smartcam child requests [\#1427](#1427) (@sdb9696)