ANSI / VT-100 Terminal emulator for Parallax Propeller microcontroller with VGA and USB support

Add-on board and firmware for the RC2014 computer to provide graphics capabilities

A driver for HUB75E RGB LED Matrix Panels driven from the Parallax Propeller V2

Single and Two-wheel driver objects P2 Spin2/Pasm2 for our 6.5" Hub Motors with Universal Motor Driver Board

VSCode support for SPIN/PASM for Propeller V1 and V2

Chip's Flash FS with a standard API for accessing the FLASH chip on the P2 Edge Module.

Visually combining fluid, binary digits on an RGB LED Matrix panel

Spin/Spin2 Language Server based vscode extension

Reimplementation of "PNut for Windows" in typescript

A CMake toolchain for the Parallax P8X32A Propeller microcontroller.

The code for the Kevinbot v3 Sub-Board

Support for the book: "ROTOR 1 - Bau Dir Deinen Computer mit ein paar Chips und Drähten selbst"

P2 Object for I2C 16-chan Servo Driver with 6-axis arm control demo

DRV8833 PI Speed (not PID) Brushed DC motor controller for Parallax Propeller 2

Enable an RPi to serve as an IoT gateway for our P2 Hardware - requiring only minimal P2 footprint (pins, code-space, etc.)

The future home of our combined Flash and uSD filesystem for simultaneous use of the FLASH chip and the uSD card on a P2 Edge Module.

P2 Object for interacting with the VL53L5CX Time-of-Flight Sensor

Exercise/Characterize Multiple servos connected via PCA9685 PWM controller