Dust collection manifold

For years, I tried to equip my shop with a convenient dust-collection system for multiple machines. First, I engineered a system with seven machines permanently connected. But each time I…

Danielle Lander | DIY + Home Design on Instagram: "I used three different hoses for the three different outputs because, well, they have three different purposes 🤩 Most notably, I used two different “click & connect” systems for the miter saw and the extra hose. I needed the miter saw hose to be more rigid, whereas I needed the extra hose to be more flexible. These hoses, as well as the primary dust collection structure, are all included in detail in the Phase 2 Build Plans 🙌🏼…

You've invested in high-efficiency equipment and tools for Your woodworking shop, but is your dust extraction system working at peak efficiency? Find out about the most common mistakes when designing dust extraction and collection system and how to avoid them.

In my small shop, I use a shop vacuum to collect dust from several tools. To cut down on the need to swap hoses, I built this manifold with two blast gates. Now I transfer suction with a flip of my wrist. To make the box, I drilled holes...

For years, I tried to equip my shop with a convenient dust-collection system for multiple machines. First, I engineered a system with seven machines permanently connected. But each time I…

Here's an Accessory for Your Router Table That Helps Control Dust and Chips.

By Dave Munkittrick…

A guide to dust collection for beginners. Understand the differences to make a decision to pick the right one - dust extractor, dust collector, shop vac and dust separator #anikasdiylife

Jarrhead's Project