FS Class 625

From Infogalactic: the planetary knowledge core
(Redirected from FS Class 623)
Jump to: navigation, search
FS Class 625
300px
Locomotive 625.179
Type and origin
Power type Steam
Builder
Build date 1914–1923
Total produced 188
Number rebuilt 153
Specifications
UIC class 1′C h2
Gauge 1,435 mm (4 ft 8 12 in) standard gauge
Leading dia 840 mm (33.07 in)
Driver diameter 1,510 mm (59.45 in)
Length Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value).
Axle load 14.4 tonnes (14.2 long tons; 15.9 short tons)
Loco weight 53.9 tonnes (53.0 long tons; 59.4 short tons)
Tender weight 31.9 tonnes (31.4 long tons; 35.2 short tons)
Fuel type Coal
Fuel capacity 6,000 kg (13,000 lb)
Water cap 12,000 L (2,600 imp gal; 3,200 US gal)
Boiler pressure Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value).
Firegrate area 2.42 m2 (26.0 sq ft)
Heating surface 108.5 m2 (1,168 sq ft)
Superheater:
 • Heating area
33.5 m2 (361 sq ft)
Cylinders Two, inside
Cylinder size 490 mm × 700 mm (19.29 in × 27.56 in)
Valve gear Walschaerts, Caprotti
Performance figures
Maximum speed 80 km/h (50 mph)
Power output 800 CV (590 kW; 790 hp)
Tractive effort Lua error in Module:Convert at line 1851: attempt to index local 'en_value' (a nil value).

The Ferrovie dello Stato (FS, Italian State Railways) Class 625 (Italian: Gruppo 625 ) is a class of 2-6-0 'mogul' steam locomotives in Italy. The class is commonly known by the nickname Signorine (Italian for 'young ladies', also shared with the similar Class 640 locomotives),[1] or Signorina in the singular, because of their perceived grace and beauty compared to other locomotives.

Design and construction

The Class 625 was the superheated and simple expansion version of the pre-existing mixed traffic Class 600 design; following with the success of the Class 640 (itself a superheated and simple-expansion version of the older Class 630 engines), previous designs were altered accordingly and 108 of the class were built from various companies in Italy between 1910 and 1914, and another 80 again between 1922 and 1923, of which the last 25 by Berliner Maschinenbau; the gap in the production run was caused by the events of World War I.

Class 625 3xx conversions

From 1929 onwards the existing 188 class 625 locomotives were supplemented by a further 153 locomotives rebuilt from older FS Class 600 engines; those, that could be distinguished from the Class 625 only from their being compound and non-superheated locomotives, had been constructed between 1904 and 1910 by Gio. Ansaldo & C., Costruzioni Meccaniche di Saronno, and Henschel & Son. A total of 153 class 600 engines were superheated, fitted with Caprotti valve gear and reclassified as class 625 machines between 1929 and 1933. Their class number changed from 600 to 625; they retained the sequential numbering from their original classification, but with the initial number altered to a 3. Thus the original 600 008 became 625 308, for example. After 1933 the remaining unrebuilt 95 class 600 engines were gradually scrapped.

Operation

File:Gr625-7.JPG
Locomotive 625 017.

The locomotives were designed for mixed-traffic operation (use on both passenger and freight services) and were designed to operate on steep gradients. The first examples of the class entered service upon completion in 1910, and the final operational examples were withdrawn from mainline service in 1976. A number of locomotives in the class were retained in mothballed working condition as part of Italian Railways' policy of keeping steam locomotives in reserve, well into the era of internal combustion and electric motive power. The final withdrawal from the reserve fleet was locomotive 625 100 in 1998.

Class 623 conversions

In the early 1950s a total of 35 class 625 locomotives, of which ten were ex-Class 600 rebuilds, were rebuilt into the class 623. Fitted with the Franco-Crosti boiler (with two pre-heaters placed on the sides of the boiler), these engines were visually distinctive. The design was not successful, and these engines were all withdrawn by the early 1970s, with none surviving into preservation.

In popular culture

A number of scale models of class 625 locomotives have been manufactured by Italian model company Rivarossi.

Locomotive 625 116 featured in the 2013 Italian cinema film The Magistrate by Giulio Base.

Locomotive 625 017 has gained some attention through operations on the Vatican Railway (the world's only national railway network to own no locomotives). The engine hauled a train for Pope John XXIII in 1962, and in 2015 hauled the inaugural train of Pope Francis's weekly train service from Vatican City railway station to Castel Gandolfo.[2] The engine has also hauled the Italian royal family.

Preservation

File:625-177 2.jpg
Preserved 625 177 on an enthusiasts' charter train.

Twenty-five Class 625 locomotives survived into preservation; amongst them, the 625.100 and 625.142 are currently operational and available for heritage trains.[3][4]

Of particular notice is the 625.308, the only remaining FS locomotive with internal Caprotti valve gear, currently being restored at Pistoia.

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Report at Catholic News Service.
  3. Lua error in package.lua at line 80: module 'strict' not found.
  4. Many of these locomotives may be located through Steam Locomotive database.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.