Kawasaki KR-1/KR-1S
Lua error in package.lua at line 80: module 'strict' not found.
The KR-1 and KR-1S were motorcycles introduced in 1988 by Kawasaki Heavy Industries. The two-stroke motorcycles were replicas of their successful KR-250 road racing competition motorcycles.
Contents
Model history
In 1988, Kawasaki produced a road racing replica motorcycle. The initial models were the B1, B2 series of the KR-1. In 1989, due to the sales success and updated models of competing manufacturers (RGV, NSR, TZR) the KR-1 (B series) evolved into the KR-1S and KR-1R (C, D series). The C1, C2, C3 and D1, D2 models shared the same engine (minor updates) and bodywork (different colour schemes) of the previous KR-1. The S and R models differed slightly in construction of frame, wheels, brakes, and colour schemes.
The engine for all KR-1 models was a two-cylinder, reed valve induction two-stroke motor of 249 cc (somewhat based on the previous Yamaha TZ/TZR configurations). The 180° firing parallel twin configuration featured a crank driven balance shaft. The power delivery was broadened with the use of the Kawasaki Integrated Powervalve System (K.I.P.S.) arrangement shared by other Kawasaki two-strokes.
Total production of all models in KR-1 (B/C/D) series was less than 10,000 units worldwide. The low production numbers has increased collectibility. Worldwide markets for sales were Japan, United Kingdom, Europe, Australia, New Zealand, South Africa (excluded USA due to emissions restrictions). Considered to be least successful of the four Japanese 250 cc Race Replicas (in terms of sales), the KR-1 series was notable for excellent handling, due to its light weight and steering geometry and least difficult to modify and increase the power output of the engine. Proven to be fastest of all 250 cc models (Suzuki RGV250, Yamaha TZR250, Honda NSR250R, Aprilia RS250) with a top speed of 139 mph (225 km/h) - tested by Performance Bikes Magazine and subsequently at Bonneville Speedway (World's Fastest Production 250 cc)
Special models
The KR-1R (D1,D2 models) were sold only for the Japanese market for 599,000yen (559,000yen for S model)
The 'R' was to compete against the more racetrack oriented SP models of the RGV,NSR(SE/SP),TZR
The 'R' featured larger carburetors (35 mm) and a close ratio gearbox, and only came in Ebony/Green(Black/Green) colour scheme.
In New Zealand, specifically for production racing, the Sports Production (SP/C3A) variant of the S model was produced. In very limited numbers, (less than 12 units) the SP was the based on a 'S' model and fitted with the 35 mm carburetors from the R model, and modified cylinder porting and compression ratio.
Parts availability
The other spare parts kit F3, SP kits (mixed gas specification) has a maximum output 68Ps (nominal) reach. Front caliper compatible parts ZXR250 those available, and the pot will be 750 different diameter and Zephyr ZRX, Barrios, GPZ also be diverted. Riakyaripa The ZXR250 and the same. Sprocket also KLE250, KLE400, ZXR250, Barrios and even numbers are different but still allow it to use. Wheel disc brake parts are compatible ZXR250 (with model year) will be common. The front discs are also different colors Kawasaki Zephyr, Zxr400 many other compatible products. KIPS valves and F3 kit version KIPS valves as well as KIPS control wheels, linkage kits, crankshaft center pins, crankshaft inner webs, bearings, conrods, seals and 35mm inlet manifold rubbers available from BDK Race Engineering in England.
Standard Colour Choice
Lime Green/Polar White (B1, B2)
Firecracker Red/Polar White (B2)
Ebony/Metallic Zeus Blue (C1, C2)
Ebony/Lime Green (C1, C2)
Lime Green/Blue 24/Pearl Alpine White (C3/C3A)
Firecracker Red/Pearl Gentry Gray (C3)
Lime Green/Pearl Alpine White (C3)
Ebony/Lime Green (D1, D2)
Specifications
KR-1 specifications
Engine type: 2-stroke, parallel 2-cylinder, liquid-cooled
Frame: Aluminium extruded E-Box frame Electronic variable exhaust valve ( KIPS ) equipment
Total Capacity: 249 cc
Bore × stroke: 56 × 50.6 mm
Maximum output: 55 ps / 10,500 rpm
Maximum torque: 3.7 kg-m / 8,500 rpm
Length: 2,005 mm
Width: 690 mm
Overall height: 1,105 mm
Seat height: 750 mm
Wheelbase: 1,360 mm
Dry weight: 123 kg
Radiator fluid capacity: 1500 cc
Starting system: Kick
Ignition system: CDI
Transmission: 6-speed
Transmission Oil: SE grade 10W30/10W40 850ml
Clutch: Wet multi-plate
Fuel tank capacity: 16 L
Engine oil capacity: 1200 cc 2-stroke oil injection
Caster angle: 24 degrees
Brakes Front: 4POT dia300 mm × 2 disc, 4 pot calipers
Brakes Rear: 200 mm disc, 2 pot caliper
Tire size Front: 100/70-17
Tire size Front: 130/60-18
Carburetor: KEIHIN PWK28Φ (MJ # 135, PJ # 38, JN N68A)
AS 1 +1 / idling back 2: 900 ~ 1100 rpm
Chain: 520, 108 link
Sprocket Front: 14 tooth (varied 13, 14, 15)
Sprocket Rear: 41 tooth (varied)
Spark plug: NGK BR9ES / ND W27ESR (standard heat value)
Battery: 12V 4Ah (YB4L-B)
Headlight: 60/55W
Tail / brake light: 8/27W
Turn indicators: 23W x4
Fork Diameter: Inner fork upright 41Φ
Fork oil: 10W20 355ml/OH 421 ± 4ml at level: 125 ± 2 mm Rear suspension: mono shock with Rizabatanku
KR-1S specifications
44.4 Nm / 10431 rpm
Engine type: 2-stroke, parallel twin cylinder, liquid-cooled
Frame: Aluminium extruded E-Box frame Electronic variable exhaust valve ( KIPS ) equipment
Total Capacity: 249 cc
Bore × stroke: 56 × 50.6 mm
Maximum output: 65 ps / 10,500 rpm
Maximum torque: 3.7 kg-m / 8,500 rpm
Length: 2,005 mm
Width: 695 mm
Overall height: 1,105 mm
Seat height: 755 mm
Wheelbase: 1,370 mm
Dry weight: 131 kg
Engine type: 2-stroke, parallel twin cylinder, liquid-cooled
Water radiator: 1500 cc
Starting system: Kick
Ignition system: CDI
Transmission: 6-speed
Clutch: Wet multi-plate
Transmission Oil: SE grade 10W30/10W40 850ml
Fuel tank capacity: 16 L
Engine oil capacity: 1200 cc
Caster angle: 24 degrees
Brakes Front: 4POT dia300 mm × 2 disc, 4 pot calipers
Brakes Rear: 200 mm disc, 2 pot caliper
Tire size Front: 110/70-17
Tire size Rear: 140/60-18
Carburetor: Keihin Pwk28Φ
MJ # 140, PJ # 38, JN N68AAS 1 +1 / idling back 2: 1100 ~ 1300 rpm Chain: 520/108L
Sprocket
F: Ding 15
R: 40th
Spark plug: NGK Br10Es / DENSO W31Esr (standard heat value) Battery: 12V 4Ah (YB4L-B)
Headlight: 60/55W
Tail / brake light: 8/27W
Winker: 23W x4
Fork Diameter: Inner fork upright 41Φ
Fork oil: 10W20 335ml ± 4ml / OH 396 ± 4ml at level: 150 ± 2 mm
Fokuajasuta: standard 20 mm projection
Rear suspension: 21 stage with partial pressure side damping Rizabatanku / mono shock attenuation extensor surfaces of four stages Standard position rear shock damping adjustment: 09 steps back from the best partial pressure side / side stretch II Gas pressure shock: 10 kg/cm ²
KR-1R specifications
see KR-1S above Carburetor: Keihin Pwk35
[MJ # 145, PJ # 40, JN R1372J]
Gearbox: 6-speed, CLOSE RATIO
External links
 |
Wikimedia Commons has media related to Kawasaki KR-1S. |
