Mount Millar Wind Farm

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
File:Mt Millar wind farm DKC1.jpg
Mount Millar wind farm at sunset

The Mount Millar Wind Farm is situated on an escarpment between the towns of Cowell and Cleve located Lua error in Module:Convert at line 272: attempt to index local 'cat' (a nil value). southwest of Whyalla, South Australia. The 35 wind turbines are positioned on the elongated Mount Millar site (about Lua error in Module:Convert at line 272: attempt to index local 'cat' (a nil value). in length) to maximise wind exposure. The wind farm can generate up to 70 megawatts (MW) of electricity and will provide enough energy to meet the needs of about 36,000 typical households.[1]

Because wind farms do not emit greenhouse gases in the generation of electricity, wind energy is considered a highly desirable form of renewable energy and assists in the reduction of the State’s reliance on coal and gas fired electricity generation. The Mount Millar Wind Farm is different from other SA wind farms, due to the turbines being a direct drive machine that don't have gear boxes. This is why the nacelle of these turbines has a larger diameter than most.[2] It connects to ElectraNet’s existing transmission network at Yadnarie Substation, via a new 33 km 132 kV overhead transmission line and substation.[1]

Construction of this wind farm started in late 2004 and was completed in December 2005. Power production started in February 2006.[2] The $130 million project was developed by Tarong Energy Corporation Ltd, which has interests in both Queensland and South Australia (including South Australia’s first wind farm, Starfish Hill Wind Farm).[1] The Mount Millar wind farm was acquired by Meridian Energy in 2010.[3]

See also

References

  1. 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
  2. 2.0 2.1 Wind power and wind farms in South Australia
  3. Lua error in package.lua at line 80: module 'strict' not found.

External links

Lua error in package.lua at line 80: module 'strict' not found.