Pentax K-5 II
240px
K-5 II with optional GPS unit and battery grip
|
|
Type | Digital single-lens reflex camera |
---|---|
Sensor | APS-C 23.7×15.7 mm CMOS sensor |
Maximum resolution | 16.3 megapixels (4928×3264) |
Image processor | Prime II |
Recording medium | SD, SDHC, SDXC[1] and, according to one source, microSD[2] |
Lens | Interchangeable Pentax KAF3 and KAF2 mount compatible with Pentax auto-aperture lenses; older lenses supported in stop-down metering mode |
Flash | Onboard pop-up flash; hot shoe for P-TTL flash units with high-speed sync support; PC socket for studio flashes; 1/180 s X-sync speed |
Shutter speed range | 30–1/8000 s, Bulb |
ASA/ISO range | ISO 100–12,800 in 1, 1/2, or 1/3 EV steps; expandable to ISO 80–51,200 |
Exposure metering | TTL open-aperture metering, 77 segments |
Exposure modes | Green (fully automatic), program, aperture priority, shutter priority, sensitivity priority, aperture and shutter priority, manual, bulb, X-sync shutter speed, five User presets. |
Metering modes | Multi-segment, Center-weighted, Spot |
Continuous shooting | Up to 7 fps |
Viewfinder | Eye-level pentaprism, near-100% coverage, 0.92× magnification |
Rear LCD monitor | 3″, 921,000 dots (640×480 RGB pixels) |
Battery | D-LI90 lithium-ion rechargeable battery |
Optional battery packs | D-BG4 battery grip accepts additional D-LI90 battery or 6 AA batteries |
Weight | With battery: 760 g (1.68 lb) |
The Pentax K-5 II is a 16.3-megapixel digital single-lens reflex camera, successor to the Pentax K-5, sharing its body shape with its two predecessors including the Pentax K-7, and making incremental improvements on the K-5. The Pentax K-5 II is available in two versions, the basic Pentax K-5 II as well as the Pentax K-5 IIs which omits the traditional low pass filter for greater sharpness but potentially greater moiré.
Both models have improved autofocus ability, particularly in low and tungsten light, down to −3EV, which at the time of release makes it the best low-light autofocus camera.[3] Also improved is the sensitivity of the central AF area which now has an AF base of f/2.8 instead of the common f/5.6.[4] This increased AF base length helps to improve focus accuracy, in particular with fast (wide aperture) lenses and in low light.[5]
The Pentax K-5 II/IIs each have HD video capabilities, with resolutions of 1920×1080 (at 25 fps), 1280×720 (at 25 & 30 fps), 640×480 (at 25 & 30 fps).
Externally, the cameras are distinguished by a recessed screen, where the K-5 had a flush-mounted one.[6] The K-5II/IIs has a gapless design—the typical air gap is avoided by the use of a special resin—helps to reduce internal reflections and gives better visibility in bright light.[7] The material of the screen has been changed from plastic to tempered glass, which is scratch resistant.[8][9] Like its predecessor, the K-5 II/IIs is fully weather-sealed.[7]
It has the highest camera sensor rating of any Pentax camera, according to DxO Labs, with a score of 82.[10]
Bundling
The K-5 II/IIs are available in two different kits, one including the DA 18–55 mm WR lens, and the other the DA 18–135 mm WR lens, as well as a body only.[7]
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 7.0 7.1 7.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ http://www.dxomark.com/Cameras/Ratings