Robonaut

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
File:Robonaut 2 working.jpg
R2s in July 2009

Robonaut is a humanoid robotic development project conducted by the Dextrous Robotics Laboratory at NASA's Lyndon B. Johnson Space Center (JSC) in Houston, Texas. Robonaut differs from other current space-faring robots in that, while most current space robotic systems (such as robotic arms, cranes and exploration rovers) are designed to move large objects, Robonaut's tasks require more dexterity.

The core idea behind the Robonaut series is to have a humanoid machine work alongside astronauts. Its form factor and dexterity are designed such that Robonaut can use space tools and work in similar environments suited to astronauts.

The latest Robonaut version, R2, the first US-built robot on the ISS,[1] delivered by STS-133 in Feb 2011, is a robotic torso designed to assist with crew EVA's and can hold tools used by the crew.[2] However, Robonaut 2 does not have adequate protection needed to exist outside the space station and enhancements and modifications would be required to allow it to move around the station's interior.[2] NASA states "Robonauts are essential to NASA's future as we go beyond low Earth orbit",[1] and R2 will provide performance data about how a robot may work side-by-side with astronauts.[2]

Conception

File:Robonaut concept.jpg
Robonaut 1996 concept

Work on the first Robonaut began in 1997. The idea was to build a humanoid robot that could assist astronauts on tasks in which another pair of hands would be helpful or to venture forth to perform jobs either too dangerous for crew members to risk or too mundane for them to spend time on. This system wouldn't need specialized tools and would be able to use the same ones as the astronauts. The initial design of Robonaut was for it to be used as an end-effector for the robotic arm on the International Space Station, where it could serve as an alternative to human extravehicular activity for external maintenance on the station.

Robonaut 1

Robonaut 1 (R1) was the first model. The two Robonaut versions (R1A and R1B) had many partners including DARPA. None were flown to space. Other designs for Robonaut propose uses for teleoperation on planetary surfaces, where Robonaut could explore a planetary surface while receiving instructions from orbiting astronauts above.[3] Robonaut B was introduced in 2002, R1B is a portable version of R1.[4] R1 had several lower bodies. One of these was the Zero-G Leg, which if Robonaut was working on the space station he would climb using the external handrails and then use his zero-g leg to latch onto the station using a WIF socket. Another was the Robotic Mobility Platform (RMP), developed in 2003,[5] it is a base with two wheels using a Segway PT.[6] And the four wheeled Centaur 1, which was developed in 2006.[7][8] Robonaut has participated in NASA's Desert Research and Technology Studies field trials in the Arizona desert.[9]

In 2006, the automotive company General Motors expressed interest in the project and proposed to team up with NASA. In 2007 a Space Act Agreement was signed that allowed GM and NASA to work together on the next generation of Robonaut.[10]

  • Robonaut with zero-g leg.jpg

    Robonaut with zero-g leg

  • H robonaut wheels 02.jpg

    Robonaut attached to RMP

  • Robonaut 1 attached to Centaur 1.jpg

    Robonaut attached to Centaur 1

Robonaut 2

File:Robonaut2 - first movement aboard ISS.jpg
250 px

In February 2010, Robonaut 2 (R2) was revealed to the public. R2 is capable of speeds more than four times faster than R1, is more compact, more dexterous, and includes a deeper and wider range of sensing.[11] It can move its arms up to 2 m/s, has a 40 lb payload capacity and its hands have a grasping force of roughly 5 lbs. per finger. There are over 350 sensors and 38 PowerPC processors in the robot.[12]

Station crew members will be able to operate R2, as will controllers on the ground; both will do so using telepresence. One of the improvements over the previous Robonaut generation is that R2 doesn’t need constant supervision. In anticipation of a future destination in which distance and time delays would make continuous management problematic, R2 was designed to be set to tasks and then carry them through autonomously with periodic status checks.[10] While not all human range of motion and sensitivity has been duplicated, the robot's hand has 12 degrees of freedom as well as 2 degrees of freedom in wrist.[13][14] The R2 model also uses touch sensors at the tips of its fingers.[15]

R2 was designed as a prototype to be used on Earth but mission managers were impressed by R2 and chose to send it to the ISS.[10] Various upgrades were made to qualify it for use inside the station. The outer skin materials were exchanged to meet the station’s flammability requirements, shielding was added to reduce electromagnetic interference, processors were upgraded to increase the robot’s radiation tolerance, the original fans were replaced with quieter ones to accommodate the station’s noise requirements, and the power system was rewired to run on the station’s direct current system rather than the alternating current used on the ground.[10]

File:Robonaut upgrade.jpg
250 px

Robonaut 2 was launched on STS-133 on February 24, 2011, and delivered to the ISS. On August 22, R2 was powered up for the first time while in low earth orbit.[16] This was called a "power soak" which is a power system test only with no movement. On October 13, R2 moved for the first time while in space.[17] The conditions aboard the space station provide a proving ground for robots to work shoulder to shoulder with people in microgravity. Once this has been demonstrated inside the station, software upgrades and lower bodies may be added, allowing R2 to move around the interior of the station and perform maintenance tasks, such as vacuuming or cleaning filters.[10] A pair of legs were delivered to the ISS on SpX-3 in April 2014. The battery backpack was planned to be launched on a later flight in Summer/Fall 2014.[18] In the design of the R2 robot, a 3D time of flight imager will be used in conjunction with a stereo camera pair to provide depth information and visible stereo images to the system. This allows the R2 to "see", which is one of the basic preconditions to fulfill its tasks. To integrate the various sensor data types in a single development environment the image processing software Halcon 9.0 from MVTec Software (Munich, Germany[1]) is used. [19]

Further upgrades could be added to allow R2 to work outside in the vacuum of space, where R2 could help space walkers perform repairs, make additions to the station or conduct scientific experiments. There are no plans to return the launched R2 back to earth.[10]

NASA's experience with R2 on the station will help them understand its capabilities for possible deep space missions.

  • Robonaut2 and Dan Burbank.jpg

    R2 aboard ISS with Dan Burbank

  • Robonaut 2 and Centaur 2.jpg

    R2 attached to Centaur 2

  • Robonaut and Project M concept art.jpg

    R2 with proposed terrestrial legs

  • R2 climb legs demo.jpg

    R2 with its 'climbing legs'

Project M

In late 2009, a proposed mission called Project M was announced by Johnson Space Center that, if it had been approved, would have had the objective of landing an R2 robot on the Moon within 1,000 days.[20][21]

See also

References

  1. ↑ 1.0 1.1 Lua error in package.lua at line 80: module 'strict' not found.
  2. ↑ 2.0 2.1 2.2 Lua error in package.lua at line 80: module 'strict' not found.
  3. ↑ Nicholos Wethington, Universe Today, "Future Mars Explorers Might Only See the Planet from Orbit" December 3rd, 2007 (accessed 12 August 2009)
  4. ↑ Robonaut, Robert Ambrose, Johnson Space Center
  5. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  6. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  7. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  8. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  9. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  10. ↑ 10.0 10.1 10.2 10.3 10.4 10.5 Lua error in package.lua at line 80: module 'strict' not found.
  11. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  12. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  13. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  14. ↑ C. S. Lovchik and M. A. Diftler, "The Robonaut hand: a dexterous robot hand for space," 1999 IEEE International Conference on Robotics and Automation, Vol. 2, pp. 907-912, doi:10.1109/ROBOT.1999.772420
  15. ↑ M.K. O'Malley and R.O. Ambrose, "Haptic feedback applications for Robonaut," Industrial Robot: An International Journal, Vol. 30, pp. 531-542 (2003) doi:10.1108/01439910310506800
  16. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  17. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  18. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  19. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  20. ↑ Lua error in package.lua at line 80: module 'strict' not found.
  21. ↑ Lua error in package.lua at line 80: module 'strict' not found.

Technical Papers

  • R.O. Ambrose, H. Aldridge, R.S. Askew, R. Burridge, W. Bluethman, M.A. Diftler, C. Lovchik, D. Magruder, F. Rehnmark, ROBONAUT: NASA’s Space Humanoid, IEEE Intelligent Systems Journal, Vol. 15, No. 4, pp. 57–63, July/Aug. 2000, doi:10.1109/5254.867913.
  • M. A. Diftler, C. J. Culbert, and R.O. Ambrose, "Evolution of the NASA/DARPA Robonaut Control System," in IEEE International Conf. Robotics Automation, pp. 2543–2548, 2003.
  • G. Landis, "Teleoperation from Mars Orbit: A Proposal for Human Exploration," Acta Astronautica, Vol. 61, No. 1, 59-65 (Jan. 2008); also paper IAC-04-IAA.3.7.2.05, 55th International Astronautical Federation Congress (2004). (A popular version is available from NASA.)

External links

Videos
Retrieved from "https://infogalactic.com/w/index.php?title=Robonaut&oldid=3396455"