Brunton's Mechanical Traveller I
Brunton's Mechanical Traveller
|
| Type and origin |
| Power type |
Steam |
| Builder |
William Brunton |
| Build date |
c. 1813 |
|
| Specifications |
| Configuration |
Four wheels, not driven |
| Loco weight |
Lua error in Module:Convert at line 452: attempt to index field 'titles' (a nil value). |
| Boiler pressure |
40 lbf/in2 (280 kPa) |
| Cylinders |
1 |
| Cylinder size |
6 in × 24 in (152 mm × 610 mm) |
|
| Performance figures |
| Maximum speed |
3 miles per hour (4.8 km/h) |
|
|
|
Brunton's Mechanical Traveller II
| Type and origin |
| Power type |
Steam |
| Builder |
William Brunton |
| Build date |
October 1814 |
|
| Specifications |
| Configuration |
Four wheels, not driven |
| Loco weight |
5 long tons (5.1 t; 5.6 short tons) |
| Cylinders |
1 or 2 |
|
| Performance figures |
| Maximum speed |
2.5 miles per hour (4.0 km/h) |
|
| Career |
| Operators |
Newbottle Colliery |
| Retired |
31 July 1815 |
| Disposition |
destroyed by boiler explosion |
|
The Steam Horse was constructed by the Butterley Company in Derbyshire in 1813 by William Brunton (1777–1851). Also known as the "Mechanical Traveller" it had a pair of mechanical legs, with feet that gripped the rails at the rear of the engine to push it forwards at about three miles an hour.
Design
To modern readers it may seem a comical contraption, but it provides an interesting insight into railway thought at the time. The collieries were well served between towns by the canal system. From the pit head to the canals, horse-drawn wagonways had been constructed and steam engines were seen as no more than a noisy and dangerous novelty. However the Napoleonic Wars from 1799 to 1815 had brought a great increase in the price of fodder. Moreover, some such "railways" were being constructed on the steeper gradients within canals, as for instance on the Charnwood Forest Canal.
Nobody believed that steel wheels on smooth steel rails would give enough adhesion until Stephenson and Hedley proved otherwise in 1813 and even the former considered 1 in 100 (1%) was the absolute maximum grade. Consequently such steam operated systems as there were, were operated by cumbersome cables, or by the use of an expensive rack and pinion.
Crich
This makes Brunton's idea seem more reasonable, given that the Butterley Company were faced with a gradient of 1 in 50 between its Limestone quarry at Crich to the Cromford Canal at Amber Wharf, some 1.25 miles (2.01 km) away. Brunton took out a patent, No. 3700, dated 22 May 1813 for the locomotive.[1] The Butterley locomotive cost a total of £240.[2]
Newbottle
The historical record is scanty but it seems that the Steam Horse operated successfully for an unknown period. So much so, that another, larger, one seems to have been built for the Newbottle Colliery, in County Durham. This locomotive cost £540 and may have had two cylinders.[3] During 1814 and 1815 it hauled loads up a 1 in 36 gradient at 3 miles per hour (4.8 km/h), but the colliery owners were not happy with it. On 31 July 1815,[1] during a demonstration, the new wrought iron boiler exploded, killing thirteen spectators and injuring several others, and the idea was not pursued.[4][5] This incident was the first recorded railway disaster.[1]
References
- ↑ 1.0 1.1 1.2 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- Loughnan St. L.Pendred (1921) A Note on Brunton's Steam Horse, 1813,Transactions of The Newcomen Society 02 (1921) : 118-120 available on line
