Ventilation (firefighting)

For other uses, see Ventilation (disambiguation).

Ventilation is a part of structural firefighting tactics, and involves the expulsion of heat and smoke from a fire building, permitting the firefighters to more easily and safely find trapped individuals and attack the fire. If a large fire is not properly ventilated, not only will it be much harder to fight, but it could also build up enough poorly burned smoke to create a smoke explosion, or enough heat to create a flashover. Contrarily, poorly placed or timed ventilation may increase the fire's air supply, causing it to grow and spread rapidly. The flashover may cause the temperature inside the building to peak at over 1000 °C (1850 °F).

Types of ventilation

In general, there are two types of ventilation; vertical and horizontal. Their names refer to the general locations of the intended exit points of the heat and smoke to be ventilated. Vertical ventilation takes place through holes cut in the roof, typically by truck companies during the early stages of a fire in a process known collectively as roof operations, while horizontal ventilation usually takes place through doors and windows. The goal of each is to clear heat and smoke to increase chances of survival for trapped occupants, and/or so that water lines can be advanced into the structure, to more effectively battle the flames. While their goals are similar, their applications are different, but still both require good timing and coordination so that increased air flow through a structure doesn't contribute to fire spread.

Methods

Mechanical fans can be used to provide positive pressure ventilation when used in tandem with either existing openings such as windows, skylights or heat/smoke vents on the roof; or by cutting new exhaust vents in the building. If there is no suitable existing hole, firefighters may use their equipment to make one, such as specialised saws for cutting a large hole in the roof. A conical hose-stream aimed around an opening -of a window or door, etc.- entrains smoke and thus increases the exhaust rate of smoke from the space. This is a process called "hydraulic ventilation". This strategy might be used when the fire is small and protecting property from smoke damage can be achieved safely. It can also be used more aggressively when a structure is "fully involved" and the smoke is obstructing the nozzlemans view of the hotspots.

High-rise buildings sometimes also incorporate fans to produce a positive pressure in stairwells and elevator shafts to reduce smoke infiltration into those spaces.

When glass windows in a burning structure burst from internal pressure and heat, or the fire burns through the roof, it may be said to have "auto-ventilated" or "self-ventilated."

See also

• Glossary of firefighting

External links

• "Ventilation Basics" — http://www.firerescue1.com/fire-products/ventilation/articles/18506-Ventilation-Basics/
• "Positive Pressure Ventilation" — http://www.firetactics.com/PPV.htm
• "UT / Austin Fire Department Positive Pressure Ventilation" - http://www.me.utexas.edu/~ezekoye/rsch.dir/PPV.html
• "Fire Behaviour and Ventilation Resources" - https://firenotes.ca/Fire_Behaviour