Diy anvil

A short stretch of railroad track is turned into an anvil. The basic shape was cut with an angle grinder and file, then sanded and blued...

#DIY #anvilrest for #rail #anvil

DIY Railroad Anvil Stand: In this Instructable I will be showing you step-by-step how to make this rustic looking anvil stand. I decided to make this stand because I recently picked up this cool old anvil that was made from a piece of a railway track and had no place to work…

My stake anvil/bick setup. Glued and bolted Doug Fir, with a piece of 1" inside square tubing set in to take hardie tools. The anvil is from oldworldanvils.com and the bick from blacksmithsdepot.com....

Throughout this article, you’ll learn: What to look for when buying an anvil base The pros and cons of metal and wood bases How you can make your own at home #toolsowner #blacksmith #blacksmithing #anvil

Making a small anvil. (Lots of pictures):

finished railway track anvil. with 25mm hardy hole.

I like this stand but I don't think I would put those lower outer cross braces on. They seem unnecessary.

A collection of improvised anvils - Anvils, Swage Blocks, and Mandrels - I Forge Iron

I want to start by saying that most of what I'm about to post has already been posted in another thread. I just wanted to add my own idea's to it, or take multiple ideas and put them together. To see where I got a lot of my ideas see the original post on how to "Build Your Own Leg Vise" So my tak...

How to Make an Anvil: , , The Anvil Poem , , , , by: For the Sparrows Feb 2013

anvil mount - Google Search

Making a Base for Your Anvil: What you will need or more to the point what I used, there is always room for improvisation. Materials: Large block of green wood Metal strapping; I used 20mm x 3mm stainless steel flat bar but anything of a similar size will do. 2 large coach bolts…

Make an inexpensive striking anvil with a hardy hole for stake tool use out of scrap mild-steel...

This is my first anvil, I had been using a rail anvil that you can see in my other posts, it worked great for what it was but I was ready to upgrade. This is my 110lb Vulcan and stand that I made today, let me know what you think. Start with 2, 2x12x12 untreated boards and cut 6, 23.5in pieces. T...