Iron oxide

Discover Pinterest’s best ideas and inspiration for Iron oxide. Get inspired and try out new things.
1k people searched this
·
Last updated 22h
SialCanada on Instagram: "👉@claystationbangalore  ・・・ Oil Spot Effect!   · Oil spot effect is obtained by the Double-layering of Iron rich glazes  · So, the Iron rich glaze should be the base coat and the other contrast glazes would be the second coat  · This effect is happening because of the bubble formation due to the release of gases during the breakdown of iron oxide followed by crystallization of Iron during cooling. · In simple way, the skin of the bubbles oxidizes and then lays down on the surface again creating these oil spot effects   Our Experiments:  · First glaze is the Base glaze, 3 Secs dipping time  · Second glaze is dipped after fully dried of the first coat and then quickly dipped  · Fired at Cone 6 temp, Oxidation firing  1. Charcoal Black + Studio White  2. Black Brown Oil Spot Glaze Combinations, Iron Luster Glaze Combinations, Glazing Inspiration, Spectrum Glazes, Black Studio, White Things, Speckle Glaze, Metallic Glaze, Amaco Glazes

SialCanada on Instagram: "👉@claystationbangalore ・・・ Oil Spot Effect! · Oil spot effect is obtained by the Double-layering of Iron rich glazes · So, the Iron rich glaze should be the base coat and the other contrast glazes would be the second coat · This effect is happening because of the bubble formation due to the release of gases during the breakdown of iron oxide followed by crystallization of Iron during cooling. · In simple way, the skin of the bubbles oxidizes and then lays down…

70
Naked Volume on Instagram: "How to achieve a perfect oxide flooring. Read below ⬇️  	1. Prepare the Surface: Make sure the floor base is rough and free from debris. Use a cement base and level it properly. 	2. Mix Oxide Paste: Combine colored oxide powder with white cement and a little water to create a smooth, lump-free paste. 	3. Apply the First Layer: Spread the oxide paste evenly over the floor with a trowel. Ensure an even layer about 2–3 mm thick.  4. Smoothen the surface : Use paper to dewater the surface and different size of trowel to smoothen the surface.  	5. Cure the Layer: Keep the layer wet for 3 to 4 day by gently sprinkling water. This helps it set and increases durability. 	6. Polish the Floor: After the curing period, mix the wax polish with the same oxide power and apply Cement Floor Color Ideas, Cheap Flooring Ideas Diy, Oxide Flooring, Kerala Home, Garage Remodel, White Cement, Cement Floor, Traditional Architecture, Iron Oxide

Naked Volume on Instagram: "How to achieve a perfect oxide flooring. Read below ⬇️ 1. Prepare the Surface: Make sure the floor base is rough and free from debris. Use a cement base and level it properly. 2. Mix Oxide Paste: Combine colored oxide powder with white cement and a little water to create a smooth, lump-free paste. 3. Apply the First Layer: Spread the oxide paste evenly over the floor with a trowel. Ensure an even layer about 2–3 mm thick. 4. Smoothen the surface : Use paper…

6

Related interests

Iron oxide and more

Explore related boards