Screen printing exposure unit

In this video we make a table top exposure unit out of basic household items. All music Licensed through Soundstripe

My take on an affordable DIY screen printing exposure unit using light emitting diodes (LEDs). List of Materials 1/4” plywood for box1/8” plywood for “deck” to support LED stripsPocket screwsDigital timerNon-waterproof UV LED strips12 volt power supply (mine came with LEDs), or AmazonSoldering iron“hookup wire” to run LEDs continuously“Step Wedge” exposure calculator Anthem Screen Printing Supply's exposure

UV Exposure: the light wavelength of our 50W screen printing kit is 395nm, high energy able to shorten the solidification time of photo emulsion; The exposure time is about 3-5 minutes, which depends on the thickness of the emulsion Adjustable Stand: the stand our screen print exposure unit can be adjusted at different heights and angles to satisfy different exposing demands of screen print, bringing a lot of convenience to you

Meet Golden Press Studio, the goofy, three-man team who inspires and delights screen printers with their humor, artistic talent, and knowledge. With Jonathan, the owner and screen printer; Cory, the graphic designer and photographer; and Jarred, the videographer, the gang is unstoppable.The print shop began four years ago in Jonathan’s garage and grew into a brick-and-mortar branding studio.

Want a low-budget way to achieve professional screen printing exposure on your next stencil? Today on screenprintingdog.com, I'll show you how to diy your own screen printing exposure unit for under $40 bucks or less! This unit is far from being hi-tech, but it'll get the job done - click to learn how I do it!

My homemade Exposure Unit for screen printing ! Using a 500W halogen work light! #getfamiliar #screenprinting #diy #homemade Getfamiliarco.com

- This method is useful for making smooth, thick coats. Took me a while to find out on my own!