Outdoor sink from water hose

Discover Pinterest’s best ideas and inspiration for Outdoor sink from water hose. Get inspired and try out new things.
78 people searched this
·
Last updated 1d
121K views · 10K likes | Vanessa Minton on Instagram: "How we made this DIY Veggie Rinsing Station!  . Wood purchased: 3-2"x4"s 8 feet long  3-4x4"s 8 ft long  1-2"X3" 8 ft long  Other supplies:  About 30 - 3" wood screws  Chop saw Drill  Hardware cloth  Staple gun  Sink  . We cut the 4"x4"s to 40 inches tall each. Then made a frame to hold the sink and support the hardware cloth.  The frame was made based on the width of the sink with just enough space to allow the base of the sink to fit snug inside of it.  We attached the frame to the 4"x4"s using 3" wood screws then added supports throughout using the remaining 2"x4"s.  My friend had an extra 2"x3" and added it across the full length of the bottom of the table to help with stability.  We sealed the wood with Thompson's Water seal and a Outdoor Sink From Water Hose, Diy Outdoor Garden Sink, Watering Station For Garden, Outdoor Vegetable Washing Station, Diy Sink Stand, Veggie Wash Station, Outdoor Kitchen Sink Ideas Diy, Diy Vegetable Washing Station, Camp Sink Diy

121K views · 10K likes | Vanessa Minton on Instagram: "How we made this DIY Veggie Rinsing Station! . Wood purchased: 3-2"x4"s 8 feet long 3-4x4"s 8 ft long 1-2"X3" 8 ft long Other supplies: About 30 - 3" wood screws Chop saw Drill Hardware cloth Staple gun Sink . We cut the 4"x4"s to 40 inches tall each. Then made a frame to hold the sink and support the hardware cloth. The frame was made based on the width of the sink with just enough space to allow the base of the sink to fit…

100