This article is an open access article distributed under the terms and conditions of the Creative... more This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY
The different activity of a 1% Pd/carbon catalyst towards aromatic and aliphatic aldehydes hydrog... more The different activity of a 1% Pd/carbon catalyst towards aromatic and aliphatic aldehydes hydrogenation has been explored by 13C NMR relaxation. The ratio between T1 relaxation times of adsorbed (ads) and free diffusing (bulk) molecules (T1ads/T1bulk) can be used as an indicator of the relative strength of interaction between the reactant and the catalytic surface, where the lower the T1ads/T1bulk, the higher the adsorption strength. It can be seen that 1% Pd/carbon showed a reverse catalytic behaviour towards benzaldehyde and octanal hydrogenation, which can be explained by analysing the T1 relaxation times related to each substrate in the presence of the catalyst. Comparing and correlating the different T1ads/T1bulk values, we were able to prove that the different catalytic results mainly depend on the contrasting adsorption behaviour of substrates on the catalyst. Moreover, the role of the solvent has been disclosed, as NMR results revealed that the adsorption of the reactants w...
To obtain selective hydrogenation catalysts with low noble metal content, two carbon-supported Mo... more To obtain selective hydrogenation catalysts with low noble metal content, two carbon-supported Mo-Pt bimetallic catalysts have been synthesized from two different molybdenum precursors, i.e., Na2MoO4 and (NH4)6Mo7O24. The results obtained by X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) combined with the presence and strength of acid sites clarified the different catalytic behavior toward cinnamaldehyde hydrogenation. After impregnating the carbon support with Mo precursors, each sample was used either as is or treated at 400 °C in N2 flow, as support for Pt nanoparticles (NPs). The heating treatment before Pt deposition had a positive effect on the catalytic performance. Indeed, TEM analyses showed very homogeneously dispersed Pt NPs only when they were deposited on the heat-treated Mo/C supports, and XPS analyses revealed an increase in both the exposure and reduction of Pt, which was probably tuned by different MoO3/MoO2 ratios. Moreover, the d...
Gold nanoparticles supported on various oxides (CeO2, CeO2/TiO2, MgO, MgO/TiO2, La2O3, La2O3/TiO2... more Gold nanoparticles supported on various oxides (CeO2, CeO2/TiO2, MgO, MgO/TiO2, La2O3, La2O3/TiO2) (with 4 wt.% Au loading) were investigated in the liquid (aqueous) phase oxidation of glycerol by molecular oxygen under mild conditions, in the presence of alkaline earth (CaO, SrO and MgO) or alkaline (NaOH) bases. Full conversion and selectivity between 38 and 68% to sodium glycerate were observed on different Au supported catalysts (Au/MgO/TiO2, Au/La2O3/TiO2, Au/CeO2 and Au/CeO2/TiO2). The combined effect of Au particle size and basicity of the support was suggested as the determining factor of the activity. Agglomeration of gold nanoparticles, found after the reaction, led to the deactivation of the catalysts, which prevents the further oxidation of sodium glycerate into sodium tartronate. Promising results were obtained with the use of alkaline earth bases (CaO, SrO, MgO), leading to the formation of free carboxylic acids instead of salts, which are formed in the presence of the...
Carbon nanofibers (CNFs) have been functionalized by introducing O, N, and P containing groups in... more Carbon nanofibers (CNFs) have been functionalized by introducing O, N, and P containing groups in order to investigate the effect of support functionalization in Ru catalysed hydroxymethyl furfural (HMF) and levulinic acid (LA) hydrogenation. In the case of HMF, despite the fact that no effect on selectivity was observed (all the catalysts produced selectively gamma-valerolactone (GVL)), the functionalization strongly affected the activity of the reaction. O-containing and N-containing supports presented a higher activity compared to the bare support. On the contrary, in HMF hydrogenation, functionalization of the support did not have a beneficial effect on the activity of a Ru-catalysed reaction with respect to bare support and only CNFs-O behaved similarly to bare CNFs. In fact, when CNFs-N or CNFs-P were used as the supports, a lower activity was observed, as well as a change in selectivity in which the production of ethers (from the reaction with the solvent) greatly increased.
The photoreduction of CO2 is an intriguing process, which allows the synthesis of fuels and chemi... more The photoreduction of CO2 is an intriguing process, which allows the synthesis of fuels and chemicals. One of the limitations for CO2 photoreduction in the liquid phase is its low solubility in water. This point has been here addressed by designing a fully innovative concept of pressurized photoreactor, allowing operation up to 20 bar and applied to improve the productivity of this very challenging process. The photoreduction of CO2 in the liquid phase was performed using commercial TiO2 (Evonink P25), TiO2 obtained by flame spray pyrolysis (FSP) and gold doped P25 (0.2 wt% Au-P25) in the presence of Na2SO3 as hole scavenger (HS). The different reaction parameters (catalyst concentration, pH and amount of HS) have been addressed. The products in liquid phase were formic acid and formaldehyde. Moreover, for longer reaction time and with total consumption of HS, gas phase products formed (H2 and CO) after accumulation of significant amount of organic compounds in the liquid phase, due...
The selective oxidation of veratryl alcohol (VA), a model compound of lignin, with oxygen molecul... more The selective oxidation of veratryl alcohol (VA), a model compound of lignin, with oxygen molecules to produce veratraldehyde (VAld) was studied over monometallic Au, Pd, and bimetallic Au:Pd nanoparticles supported on a CeZrO₂ mixed oxide for the first time. These bimetallic Au-Pd catalysts with Au:Pd molar ratios from 0.4 to 4.3 were synthesized by the sol-immobilization method. Furthermore, all the catalysts were characterized by inductively coupled plasma-atomic emission spectroscopy (ICP-AES), N₂ physisorption, X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy-high angle annular dark field (STEM-HAADF) imaging, energy dispersive X-ray spectroscopy (EDXS), and temperature programmed reduction (TPR) techniques. A synergistic effect between gold and palladium was observed over all the bimetallic catalysts in a wide range of studied Au:Pd ratios. Remarkably, the optimum Au:Pd ratio for this reaction was 1.4 with a turnover frequency of almost six tim...
We report the use of Ru catalysts supported in the activated carbon (AC) and carbon nanofibers (C... more We report the use of Ru catalysts supported in the activated carbon (AC) and carbon nanofibers (CNFs) for the selective production of liquid fuel dimethylfuran (DMF) and fuel additives alkoxymethyl furfurals (AMF). Parameters such as the reaction temperature and hydrogen pressure were firstly investigated in order to optimise the synthesis of the desired products. Simply by using a different support, the selectivity of the reaction drastically changed. DMF was produced with AC as support, while a high amount of AMF was produced when CNFs were employed. Moreover, the reusability of the catalysts was tested and deactivation phenomena were identified and properly addressed. Further studies need to be performed in order to optimise the stability of the catalysts.
This article is an open access article distributed under the terms and conditions of the Creative... more This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY
The different activity of a 1% Pd/carbon catalyst towards aromatic and aliphatic aldehydes hydrog... more The different activity of a 1% Pd/carbon catalyst towards aromatic and aliphatic aldehydes hydrogenation has been explored by 13C NMR relaxation. The ratio between T1 relaxation times of adsorbed (ads) and free diffusing (bulk) molecules (T1ads/T1bulk) can be used as an indicator of the relative strength of interaction between the reactant and the catalytic surface, where the lower the T1ads/T1bulk, the higher the adsorption strength. It can be seen that 1% Pd/carbon showed a reverse catalytic behaviour towards benzaldehyde and octanal hydrogenation, which can be explained by analysing the T1 relaxation times related to each substrate in the presence of the catalyst. Comparing and correlating the different T1ads/T1bulk values, we were able to prove that the different catalytic results mainly depend on the contrasting adsorption behaviour of substrates on the catalyst. Moreover, the role of the solvent has been disclosed, as NMR results revealed that the adsorption of the reactants w...
To obtain selective hydrogenation catalysts with low noble metal content, two carbon-supported Mo... more To obtain selective hydrogenation catalysts with low noble metal content, two carbon-supported Mo-Pt bimetallic catalysts have been synthesized from two different molybdenum precursors, i.e., Na2MoO4 and (NH4)6Mo7O24. The results obtained by X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) combined with the presence and strength of acid sites clarified the different catalytic behavior toward cinnamaldehyde hydrogenation. After impregnating the carbon support with Mo precursors, each sample was used either as is or treated at 400 °C in N2 flow, as support for Pt nanoparticles (NPs). The heating treatment before Pt deposition had a positive effect on the catalytic performance. Indeed, TEM analyses showed very homogeneously dispersed Pt NPs only when they were deposited on the heat-treated Mo/C supports, and XPS analyses revealed an increase in both the exposure and reduction of Pt, which was probably tuned by different MoO3/MoO2 ratios. Moreover, the d...
Gold nanoparticles supported on various oxides (CeO2, CeO2/TiO2, MgO, MgO/TiO2, La2O3, La2O3/TiO2... more Gold nanoparticles supported on various oxides (CeO2, CeO2/TiO2, MgO, MgO/TiO2, La2O3, La2O3/TiO2) (with 4 wt.% Au loading) were investigated in the liquid (aqueous) phase oxidation of glycerol by molecular oxygen under mild conditions, in the presence of alkaline earth (CaO, SrO and MgO) or alkaline (NaOH) bases. Full conversion and selectivity between 38 and 68% to sodium glycerate were observed on different Au supported catalysts (Au/MgO/TiO2, Au/La2O3/TiO2, Au/CeO2 and Au/CeO2/TiO2). The combined effect of Au particle size and basicity of the support was suggested as the determining factor of the activity. Agglomeration of gold nanoparticles, found after the reaction, led to the deactivation of the catalysts, which prevents the further oxidation of sodium glycerate into sodium tartronate. Promising results were obtained with the use of alkaline earth bases (CaO, SrO, MgO), leading to the formation of free carboxylic acids instead of salts, which are formed in the presence of the...
Carbon nanofibers (CNFs) have been functionalized by introducing O, N, and P containing groups in... more Carbon nanofibers (CNFs) have been functionalized by introducing O, N, and P containing groups in order to investigate the effect of support functionalization in Ru catalysed hydroxymethyl furfural (HMF) and levulinic acid (LA) hydrogenation. In the case of HMF, despite the fact that no effect on selectivity was observed (all the catalysts produced selectively gamma-valerolactone (GVL)), the functionalization strongly affected the activity of the reaction. O-containing and N-containing supports presented a higher activity compared to the bare support. On the contrary, in HMF hydrogenation, functionalization of the support did not have a beneficial effect on the activity of a Ru-catalysed reaction with respect to bare support and only CNFs-O behaved similarly to bare CNFs. In fact, when CNFs-N or CNFs-P were used as the supports, a lower activity was observed, as well as a change in selectivity in which the production of ethers (from the reaction with the solvent) greatly increased.
The photoreduction of CO2 is an intriguing process, which allows the synthesis of fuels and chemi... more The photoreduction of CO2 is an intriguing process, which allows the synthesis of fuels and chemicals. One of the limitations for CO2 photoreduction in the liquid phase is its low solubility in water. This point has been here addressed by designing a fully innovative concept of pressurized photoreactor, allowing operation up to 20 bar and applied to improve the productivity of this very challenging process. The photoreduction of CO2 in the liquid phase was performed using commercial TiO2 (Evonink P25), TiO2 obtained by flame spray pyrolysis (FSP) and gold doped P25 (0.2 wt% Au-P25) in the presence of Na2SO3 as hole scavenger (HS). The different reaction parameters (catalyst concentration, pH and amount of HS) have been addressed. The products in liquid phase were formic acid and formaldehyde. Moreover, for longer reaction time and with total consumption of HS, gas phase products formed (H2 and CO) after accumulation of significant amount of organic compounds in the liquid phase, due...
The selective oxidation of veratryl alcohol (VA), a model compound of lignin, with oxygen molecul... more The selective oxidation of veratryl alcohol (VA), a model compound of lignin, with oxygen molecules to produce veratraldehyde (VAld) was studied over monometallic Au, Pd, and bimetallic Au:Pd nanoparticles supported on a CeZrO₂ mixed oxide for the first time. These bimetallic Au-Pd catalysts with Au:Pd molar ratios from 0.4 to 4.3 were synthesized by the sol-immobilization method. Furthermore, all the catalysts were characterized by inductively coupled plasma-atomic emission spectroscopy (ICP-AES), N₂ physisorption, X-ray photoelectron spectroscopy (XPS), scanning transmission electron microscopy-high angle annular dark field (STEM-HAADF) imaging, energy dispersive X-ray spectroscopy (EDXS), and temperature programmed reduction (TPR) techniques. A synergistic effect between gold and palladium was observed over all the bimetallic catalysts in a wide range of studied Au:Pd ratios. Remarkably, the optimum Au:Pd ratio for this reaction was 1.4 with a turnover frequency of almost six tim...
We report the use of Ru catalysts supported in the activated carbon (AC) and carbon nanofibers (C... more We report the use of Ru catalysts supported in the activated carbon (AC) and carbon nanofibers (CNFs) for the selective production of liquid fuel dimethylfuran (DMF) and fuel additives alkoxymethyl furfurals (AMF). Parameters such as the reaction temperature and hydrogen pressure were firstly investigated in order to optimise the synthesis of the desired products. Simply by using a different support, the selectivity of the reaction drastically changed. DMF was produced with AC as support, while a high amount of AMF was produced when CNFs were employed. Moreover, the reusability of the catalysts was tested and deactivation phenomena were identified and properly addressed. Further studies need to be performed in order to optimise the stability of the catalysts.
Uploads
Papers by Laura Prati