Industrial Marketing Management 33 (2004) 527 – 538
The role of multichannel integration in
customer relationship management
Adrian Payne*, Pennie Frow
Cranfield School of Management, Cranfield University, Cranfield, Bedford MK430AL, UK
Received 10 October 2003; received in revised form 14 January 2004; accepted 18 February 2004
Available online
Abstract
This paper reviews the strategic role of multichannel integration in customer relationship management (CRM) with the objective
proposing a structured approach to the development of an integrated multichannel strategy. Alternative perspectives of CRM are reviewed
and it is concluded that adoption of a strategic perspective is essential for success. Multichannel integration is posited as one of the key crossfunctional processes in CRM strategy development. The nature of industry channel structure and channel participants, channel options, and
alternative channel strategies are reviewed. The customer experience is explored both within and across channels. Analytical tools, such as
market structure maps, the customer relationship life cycle, and demand chain analysis, are described. Key steps in building an integrated
multichannel strategy are examined. Major challenges faced by enterprises in their adoption of an integrated multichannel approach and areas
for future research are discussed.
D 2004 Elsevier Inc. All rights reserved.
Keywords: CRM; Multichannel integration; Channel management
1. Introduction
In less than a decade, customer relationship management
(CRM) has escalated into a topic of major importance.
Although the term only came into use to a significant extent
in the latter part of the 1990s, the principles on which it has
been based have existed for much longer. CRM builds
especially on the principles of relationship marketing; the
formal study of which goes back 20 years (Berry, 1983).
However, its origins which involve building relationships of
mutual value between suppliers and customers have existed
since the start of commerce (Grönroos, 1994, 1996). What
has changed over the past decade is a number of significant
trends that collectively enable better customer relationships
through the application of information-enabled relationship
marketing (Ryals & Payne, 2001) or CRM.
Several recent trends have impacted organisations’ ability to build more enduring relationships, especially for those
businesses with a large customer base. Amongst the most
* Corresponding author. Tel.: +44-1234-751122; fax: +44-1234751806.
E-mail address: a.payne@cranfield.ac.uk (A. Payne).
0019-8501/$ – see front matter D 2004 Elsevier Inc. All rights reserved.
doi:10.1016/j.indmarman.2004.02.002
important ones are the following: the increasing power of
computers; the decreasing cost of computers, in real terms;
the increased storage capacity of computers; the significant
reduction in the cost of storage of a megabyte of data; the
availability of increasingly sophisticated tools to undertake
data mining and data analysis; the rise of e-commerce and
the ability to be able to target customers via the Internet at a
much lower cost; an increased recognition of the importance
of customer retention and customer lifetime value; and an
increased sophistication in marketing approaches and the
development of better ways of targeting customers, including one-to-one marketing (Peppers & Rogers, 1993), permission marketing (Godin, 1999), and mass customisation
(Pine, 1993). For the industrial marketer, these trends
provide special opportunities to develop closer relationships
with customers.
CRM is a management approach that seeks to create,
develop, and enhance relationships with carefully targeted
customers to maximise customer value, corporate profitability, and thus, shareholder value. CRM is often associated
with utilising information technology to implement relationship marketing strategies. As such, CRM unites the potential
of new technologies and new marketing thinking to deliver
528
A. Payne, P. Frow / Industrial Marketing Management 33 (2004) 527–538
profitable, long-term relationships. Customers today have an
increased range of channel options. At the heart of successful CRM is the need to more effectively manage customer
relationships within a multichannel environment. It is within
this channel environment that much of the customer experience occurs.
Within the literature on channel management, there is
little by way of guidelines as to how to develop a multichannel strategy. Whilst a number of useful methodologies
have been developed to address specific components of
channel strategy, such as market mapping and channel chain
analysis, little previous effort appears to exist in developing
these into a framework for multichannel integration. This
paper reviews the role of the multichannel integration
process in CRM. Its objective is to provide a structured
approach to the development of an integrated multichannel
strategy in an industrial market.
The paper is structured as follows. First, the nature of
CRM and multichannel integration is considered and the
need to develop a strategic approach to CRM is emphasised.
Second, industry channel structure and channel participants
are reviewed. Third, channel options and channel categories
are examined. Fourth, a range of channel strategies are
identified. Fifth, the nature of the customer experience both
within and across channels is explored. Finally, six steps for
building an integrated multichannel strategy are proposed.
2. CRM and multichannel integration
CRM builds on the philosophy of relationship marketing.
This emphasis on relationships, as opposed to transactions,
is redefining how companies are interacting with their
customers (Gummesson, 1999; Kotler, 1990; Sheth &
Parvatiyar, 2000). CRM stresses two-way communication
from supplier to customer and from customer to supplier to
build the customer asset over time. Advances in technology,
especially the Internet, have greatly enhanced the flow of
dialogue, and the capture, interpretation, and dissemination
of information. Crucially, Internet technologies enable the
development and management of more complex multiple
channel and cross-channel relationships. CRM is important
because it provides enhanced opportunities by using data to
understand customers and to implement improved relationship marketing strategies.
There are many perspectives and definitions of CRM.
CRM has been defined variously as: ‘‘an e-commerce application’’ (Khanna, 2001); ‘‘a management approach that
enables organisations to identify, attract and increase retention of profitable customers by managing relationships with
them’’ (Hobby, 1999); ‘‘CRM is a business strategy combined with technology to effectively manage the complete
customer life-cycle’’ (Smith, 2001); as ‘‘data-driven marketing’’ (Kutner & Cripps, 1997); and ‘‘CRM is about the
development and maintenance of long-term mutually beneficial relationships strategically significant customers’’
(Buttle, 2001). CRM can be seen as a term for methodologies, technologies, and e-commerce capabilities used by
companies to manage customer relationships (Stone &
Woodcock, 2001) and an application of one-to-one marketing and relationship marketing, responding to an individual
customer based on what the customer tells you and what
else you know about that customer (Peppers, Rogers, &
Dorf, 1999).
A review of these and other definitions suggests that
CRM can be considered at three levels: CRM is about the
implementation of a specific technology solution project;
CRM is the implementation of an integrated series of
customer-oriented technology solutions; and CRM is a
holistic strategic approach to managing customer relationships to create shareholder value. We consider that the full
potential of CRM is only realised by addressing CRM from
the latter strategic perspective. In this paper, the strategic
approach to CRM developed by Payne and Frow (2004) is
adopted. This utilises a process approach based on five key
cross-functional CRM processes that need to be considered
by most organisations. These processes are as follows: the
strategy development process, the value creation process,
the multichannel integration process, the information management process, and the performance assessment process.
These processes are shown in Fig. 1.
This approach views CRM as a strategic set of processes
or activities that commences with a detailed review of an
organisation’s strategy (the strategy development process)
and concludes with an improvement in business results and
increased shareholder value (the performance assessment
process). The notion that competitive advantage stems from
the creation of value for the customer and for the company
(the value creation process) is key to the success of any
relationship. CRM activities for all substantial companies
will involve collecting and intelligently utilising customer
and other relevant data (the information management process) to build a superior customer experience in each
touchpoint where the customer and supplier interact (the
multichannel integration process).
The multichannel integration process has a pivotal role to
play in CRM as it takes the outputs of the business strategy
and value-creation processes and translates them into valueadding interactions with customers. It involves making
decisions about the most appropriate combination of channel participants and channel options through which to
interact with your customer base; how to ensure the customer experiences highly positive interactions within those
channels; and, where the customer interacts with more than
one channel, how to obtain and present a ‘single unified
view of the customer.’
There is increasing interest from academics and practitioners in the area of multichannel integration. Whilst there
is a huge literature on channels, there is relatively little
published work dealing with issues relating to multichannel
integration in CRM or its predecessor, hybrid marketing
systems (Moriarty & Moran, 1990). A good proportion of
A. Payne, P. Frow / Industrial Marketing Management 33 (2004) 527–538
529
Fig. 1. CRM as a cross-functional activity.
this literature and work focuses on consumer rather than
industrial markets (e.g., Boothby, 2003; Clegg, 2001;
Nalder, 2001). For some exceptions, see Funk (2002),
Johnson (2000), Kraft (2000), Sudharshan and Sanchez
(1998), Wagner (2000); and Wilson, McDonald, Hobbs,
and Dolder (2003).
The multitude of channels creates enormous opportunities for improving the scope and strength of business-tobusiness (B2B) customer relationships but great challenges
in managing the complexity of channels in a successful and
cost-effective manner. Of particular importance to CRM is
the recent development of electronic channels. This is an
area currently attracting significant interest, including a
recent special issue of this journal (Lancioni, Schau, &
Smith, 2003).
In today’s environment, costs within many traditional
channels, such as in sales forces and branch networks, are
increasing at an alarming rate. As a result, there is increasing
pressure on organisations to move to electronic channels
and seek to develop customer self-service strategies to
reduce cost. A number of leading companies in the B2B
sector, such as British Telecom (BT), Oracle, Xerox, and
IBM, are now embracing self-service. Self-service enables
customers to order products or services, seek information,
and solve problems at the time and place their needs dictate.
This is made possible through a combination of personalised
web sites and contact centres. Benefits to the customer can
be identified through regular customer satisfaction tracking
surveys.
However, as companies seek to introduce such cost
savings, it is essential that there is not a significant reduction
in customer value as the result of the introduction of a new
channel. The dramatic decline of the technology stocks
listed on stock exchanges at the start of this decade has
caused an increased focus on electronic channel solutions.
These solutions must address real customer needs and create
significant customer value based on sound business models.
Thus, a more sophisticated approach to using electronic
channels is emerging—one that seeks increases in customer
satisfaction and increases in sales and profits, as well as
reducing the cost of sale.
3. Industry channel structure
A review of the existing industry structure and its
channel participants, as well as likely future shifts in it,
needs to be undertaken prior to addressing how multiple
channels should best work together. Whilst this review is
typically considered as part of the strategy development
process in CRM, as shown in Fig. 1, it now needs to be
considered at a more detailed level within the multichannel
integration process.
The existing industry channel structure involves a study
of the current channel participants and their roles (Slater &
Olson, 2002). There are a range of channel participants
through which a company may seek to serve the final
customer. The channel structure that will be appropriate for
any given organisation will depend upon which combination
of approaches can best attract the final customers in the
target segments, which in turn will depend upon the organisation’s and intermediaries’ ability to create value relevant
to those customers’ needs. The choice regarding channel
alternatives should be made following a determination of the
value proposition (Lanning, 2000) relevant to the final
customer in the desired segments that a company wishes to
serve and may involve a combination of those shown above.
As well as considering target customers’ current buying
behaviours and motivations, it is important that a company
should also consider how these might change over time,
particularly with respect to the impact of developing technology (Wilson et al., 2003). Over the last decade, the
traditional channel structures of many industries have been
dismantled and reconfigured in response to new electronic
technologies that have opened new paths to market. Organisations, such as BT, have now developed new channel
530
A. Payne, P. Frow / Industrial Marketing Management 33 (2004) 527–538
management teams who map channel coverage for new
propositions and products as they come to market
(McLaughlin, 2003). Such teams can manage changes in
the channel mix, based on consequent shifts in margins, as
products move through their life cycle.
The challenge for managers responsible for channel
strategy is to understand both the nature of their industry
channel structure now and how it is likely to alter in the
future. Valuable insights into emerging trends within channel structures can be gained from understanding the previous evolution of the industry channel structure as well as
examining the experiences of other sectors or other industries on a global basis. Of particular relevance are the
opportunities and threats that may result from two forms
of structural change: disintermediation and reintermediation
(Chircu & Kauffman, 2000).
In seeking to benchmark practices from other industry
sectors, the exact role of mediation requires careful examination. In some industries, intermediaries are becoming more
valuable channel members, whilst in others, the value of
intermediaries is being challenged. Unless the intermediary is
adding value to the customer relationship, it may prove to be
an unnecessary cost and may be bypassed. Organisations are
now finding that to build stronger relationships with final
customers, they need to change the emphasis and expenditure
at different channel levels, or, alternatively, refocus the
existing expenditure in ways that build deeper and more
sustained relationships (McDonald & Wilson, 2001).
3.1. Developing market structure maps
The existing industry structure and the role of channel
participants can be better understood by means of a market
structure map (McDonald & Dunbar, 1998) that shows how
products or services flow from the producer through various
intermediaries to the final customer. The market map
identifies the volumes of product and services sold and
the sales values associated with them.
A market map is constructed by plotting the various
stages in the channel structure. It identifies all stages from
the production of goods or services by the enterprise (and
its competitors), through the various channel members, to
the final users. Quantification of the volumes or values at
each of these stages is a key element in the process.
Possible changes in volumes and values over time should
be identified on the market map so that the dynamics of
channels can be better understood. Ideally, margins retained
by each channel member at each stage of the market map
should be identified, as well as how these may have
changed over time.
As the market map is developed, further refinements to it
are made, including the addition of information about
specific market segments and different purchasing procedures encountered by channel members (McDonald &
Dunbar, 1998). Market maps help evaluate the success of
existing channel participants, help evaluate the amount of
marketing effort aimed at different channels, and help
consider alternative future structures.
4. Channel options
Equipped with a sound understanding of the key issues
underlying selection of the appropriate channel participants,
managers can then examine and evaluate the channel
options available. Channel options fall into six main channel
categories (Payne & Frow, 2004).
sales force
outlets
n telephony
n direct marketing
n e-commerce
n m-commerce
n
n
Although there are many individual channel options, for
practical purposes, it is convenient to group them within
these categories, as follows: sales force (including field
account management, service, and personal representation);
outlets (including retail branches, stores, depots, and
kiosks); telephony (including traditional telephone, facsimile, telex, and call centre contact); direct marketing (including direct mail, radio, traditional TV, etc., but excluding ecommerce); e-commerce (including email, the Internet, and
interactive digital TV); and m-commerce (including mobile
telephony, SMS and text messaging, and WAP and 3G
mobile services).
These main channel categories can be represented as a
continuum of forms of customer contact ranging from the
physical (such as a face-to-face encounter with a company
sales representative) to the virtual (such as an e-commerce
or G3 phone transaction).
Deciding which channels to use and in what combination
(including at what time and with which segments) is a matter
of being aware of the channel members and channel options
available and then evaluating them in the context of the
company’s business situation. This requires a full understanding of the nature of each channel type, including how it
functions, and what benefits and limitations it offers. In B2B
markets, where there is complex account management and a
large product portfolio, there will inevitably be the need for
a detailed evaluation and for a wider range of channels to be
utilised (Courtheoux, 2003). An extra level layer of complexity can occur here because of the channel hand-off
required as the product or proposition moves through the
sales cycle from demand generation to fulfilment.
5. Channel strategies
The basic decisions relating to a firm’s strategic channel
decisions have been considered by researchers, such as
A. Payne, P. Frow / Industrial Marketing Management 33 (2004) 527–538
Rosenbloom (1999). However, much less discussion seems
to be devoted in the literature as to the broad channel
strategy options that should be considered. The starting
point is to consider objectively who should dictate channel
strategy, the customer or the supplier. In general, the
customer’s needs must first be considered. If customers in
the firm’s target segments have demands that can be
satisfied best through a particular channel strategy, this
should be emphasized in the firm’s CRM strategy. As
Butanay and Wortzel (1988) have observed, a channel
strategy becomes relevant because the target customer segments want it that way. However, circumstances, including
capacity, competences, and capabilities, and business ambitions may dictate a more supplier-oriented, and less customer-oriented, approach.
As part of our research, we have identified a number of
specific categories of strategies that we consider cover the
majority of commercial businesses:
A mono-channel provider strategy is based on customer
interactions through one main channel. First Direct Bank in
the UK initially built a highly viable business with just
telephone operations and no branch structure (many years
later, they offered the Internet channel as well); in the online environment, certain B2B electronic marketplaces and
auctions, as well as consumer companies, such as Amazon,
have adopted single-channel Internet strategies, often referred to as ‘pure play.’
A customer segment channel strategy recognises that
different customer segments may wish to interact with
different channel types. Zurich Financial Services operate
in B2B-intermediated markets as well as consumer markets.
They use different channels and brands to appeal to
particular market segments. Thus, their brands, such as
Allied Dunbar, Zurich, Eagle Star, and Threadneedle, use
different routes to market, including a direct sales force,
independent financial advisers (IFAs), and a telephone
contact centre, to serve 18 customer groups with differing
needs and attitudes.
A graduated account management strategy is based on
the existing and future potential value of customers. Many
B2B companies (e.g., insurance brokers) have implemented
a graduated approach where important commercial customers are served by a direct sales force of key account
managers; medium-sized businesses are dealt with through
telephone-based account managers; and small customers
through a call centre.
A channel migrator strategy is concerned with migrating customers from one channel to another. This strategy
may be driven by the potential within a new channel to
serve more lucrative customer segments or the opportunities to reduce cost or increase customer value. Low-cost
airline EasyJet commenced selling tickets solely through a
call centre, but is now encouraging customers to purchase
their tickets through the Internet. They have used a
combination of financial incentives and reduced levels
of service in the call centre to successfully encourage
531
over 90% of both their B2B and B2C customers to buy
online.
An activity-based channel strategy recognises that customers may wish to use different channels in combination
to undertake different tasks. Thus, a customer purchasing a
computer may visit a branch to physically inspect it; use the
internet to select the exact specification of the computer;
and use a call centre to confirm that this specification will
meet their specific needs and to order it. Dell Computers
have successfully adopted this strategy.
An integrated multichannel strategy involves utilising
the full range of commercially viable channels to serve
customers and integrating them without attempting to influence the channel that the customer wishes to use. RS
Components, an electrical components supplier, and BT in
the UK are responding to their corporate market demands by
deploying such an integrated multichannel strategy. Here,
the business should seek to capture all customer information
across all channels and integrate it within a single data
repository so the business can recognise previous interactions with the customer, regardless of the channel in which
the interactions took place, and use this to enhance the
customer experience.
Discussions about channel options are sometimes dominated by considerations relating to making the sale.
However, for strategic CRM, the channels need to be
considered in the context of the whole interaction over
the life cycle of the customer relationship, not just in terms
of the sales activity (Storbacka, 2001a,b). Customer understanding needs to go beyond traditional market research,
which tends to be descriptive and aggregate results together, and drill down at a microlevel into the characteristics of
the customer value chain for key customer types, or segments. In other words, we need to understand the processes
that customers engage in—running an assembly line, an
airline, or a professional services firm—and then identify
the opportunities to create value within those processes.
We create value either by making those processes more
effective, doing them better, or more efficient, and doing
them more cheaply (Christopher, Payne, & Ballantyne,
2002).
To help businesses identify such value-creating opportunities, the stages of a customer relationship are divided
under three broad headings of acquisition, consolidation,
and enhancement (Storbacka, 2001a,b). These stages can be
broken down into more specific elements which will vary
depending on the business being considered. For example, a
computer manufacturer selling to business customers identified the following key elements: marketing communications, prospecting and lead generation, sales qualification,
proposal generation, presales activity, selling, installation,
postsales service, and ongoing account management. The
channel approach adopted by a supplier should be developed in a way that enables the company to meet different
customer segments’ needs over the life cycle and to maximise the value it creates for them.
532
A. Payne, P. Frow / Industrial Marketing Management 33 (2004) 527–538
6. The customer experience
Faced with the necessity of offering customers different
channel types to meet their changing needs during the sales
cycle (pre sale, sale, and postsale), it is increasingly imperative to integrate the activities in those different channels to
produce the most positive customer experience and to create
the maximum value. Competitive advantage today is not
just about selling products and services to customers; it is
about delivering world class service, and building long-term
and profitable relationships with customers, which are
founded on mutual benefit and trust. To succeed, therefore,
the company must consistently seek to offer an individualised relationship (Peppers et al., 1999), where economically feasible, in every customer interaction through
whatever channel is being used.
With the accelerating pace of technology, it is increasingly impossible to maintain competitive advantage merely
through the attributes of individual products. Product life
cycles are now so short that soon after launch, a company is
likely to find competitors or new entrants imitating any new
innovation (Christopher et al., 2002)—hence, the logic for
CRM. Rather than merely producing discreet products for a
mass market, the company pursues ongoing relationships
with its most profitable customers. The value to the customer resides not in any single product but in the reassurance that the company will continue to offer them a stream
of products tailored to their particular needs. In a sense, the
company becomes the trusted supplier for the customer. By
continually offering superior customer value to the customer
in an extended relationship, the financial or psychological
cost to the customer of switching to another supplier rises
dramatically. The result is increased levels of customer
retention and profitability, and a potential decrease in
customer sensitivity to price.
However, if a company is to succeed in this endeavour, it
needs to ensure that it continues to offer the customer the
same individualised relationship over time and across all
points of contact. In other words, the structure and flow of
activity in the different channels through which the company and customer interact must be integrated so that the
channels, both individually and collectively, consistently
deliver the value proposition in the eyes of the customer.
The provision of a ‘seamless and consistent customer
experience’ at every juncture will engender trust, which in
turn will reinforce the relationship and perhaps propel it
towards a higher level of opportunity and return.
The collective experiences of a customer develop into
an ‘emotional reservoir of goodwill’ (Payne, 2003) towards
the supplier. High-quality experiences increase emotional
goodwill and the likelihood of the customer giving his/her
supplier further custom. In contrast, failure to deliver on the
individualised relationship value proposition can leave the
customer disappointed and frustrated, leading to dissonance
in the relationship and worse, to the ultimate defection of
the customer to a competitor. In evaluating the customer
experience, a five-point customer satisfaction scale is often
used. Findings in a number of studies have confirmed the
importance of seeking high levels of satisfaction. For
example, a study by Jones and Sasser (1995) on loyalty
and customer satisfaction reached two major conclusions:
(1) only highly delighted customers (e.g., a ‘‘5’’ on the
five-point scale) can be considered truly loyal; and (2)
customers who are just satisfied (e.g., a ‘‘4’’ on the fivepoint scale) are only slightly more loyal than customers
who are thoroughly dissatisfied (e.g., a ‘‘1’’ on a five-point
scale).
Because of the great importance of a highly positive
customer experience, the channel strategy should seek to
ensure such an experience occurs both within channels and
across channels. The channel experience needs to be considered, in the context of a company’s industry sector and its
important customer segments, by identifying the following:
the typical and perfect customer experience within channels;
the typical and perfect customer experience across channels;
and how to sustain and improve the customer experience
within channel, across channel, and substitute an existing
channel for a better one.
6.1. The customer experience within channel
As part of a broader study on CRM, we sought over
1000 managers’ views of their experiences within two
channels—the Internet and call centres. Two specific questions were asked relating to experiences within channels:
first, what percentage of telephone calls have you made to a
call centre over the past 2 months that have resulted in a
perfect/outstanding customer experience; contrast these
with those where you have experienced delays, poor interactive voice response (IVR), multiple hand-offs, etc.?
Second, what percentage of the visits to Web sites have
you made over the past 2 months that have resulted in a
perfect/outstanding customer experience; contrast these
with those where you have not been able to complete the
registration process, experienced unreasonable requests for
information at registration, poor layout, broken linkages,
poor navigation structures, your computer locks up (apparently due to the Web site), or unnecessarily long delays in
moving around the site?
Over 70% of respondents indicated only 1 in 10 experiences in contacting a call centre were perfect or outstanding and more than 60% said only 2 in 10 experiences in
visiting Web sites were perfect or outstanding. Many complained about the poor customer experience within these
channels. Given such poor results, companies need to
understand, within their industry, what constitutes an outstanding and what constitutes a typical customer experience
amongst their key customer segments and how they can
improve it.
However, improved customer experience must be achieved at an affordable cost. The concept of segmented service
strategy is important here. Improvement should be based on
A. Payne, P. Frow / Industrial Marketing Management 33 (2004) 527–538
the profit potential of different customer segments and
service strategies and investment decisions should be made
with the knowledge of this profit potential (Payne & Frow,
1999). Where a customer interacts with multiple channels,
which is increasingly the case, the customer experience
needs to be considered cumulatively across all channel
interactions.
6.2. The customer experience across channels
The customer experience commences with the communications activities undertaken as part of the company’s
acquisition programme and continues through all subsequent forms of customer interaction (Smith & Wheeler,
2002). In communicating with the customer, a company is
likely to use a combination of different channel options or
media, such as advertising, direct mail, sales promotions,
public relations, and so on. If the company is to be
successful in forming a particular perception of itself in
the mind of the customer and in building a relationship with
them on that foundation across channels, it must ensure
consistency in the messages conveyed by these different
means (Storbacka, 2001a,b). Any incoherence or conflict in
the messages in different channels will confuse the customer, who may then misinterpret or ‘draw a blank’ about what
the company stands for and what it is offering. This
confusion across channels can seriously diminish the customer’s view of the company, and possibly instigate negative word of mouth.
The ‘touchpoints’ where the customer interacts with the
supplier in multiple channels represent the most crucial
opportunities to leverage advantage. It is here that the
planned marketing communications meet the reality of what
the customer actually experiences when they interact with
the company. The customer’s ‘experience’ of the company
will likely be a composite formed through using different
types of channel. It will be based, for instance, on how the
customer’s call is handled when they phone the company,
how efficiently their orders are processed, how professionally their complaints or service queries are dealt with, and
whether the visiting sales representative listens to them and
responds appropriately.
If the customer’s experience of the company falls short of
what they have been led to expect, their disappointment will
likely show as frustration or a withdrawal of trust in the
company. Unless the resultant quality gap or damage to the
relationship can be quickly and fully redressed and the
customer reassured, the company’s espoused position will
be undermined. The danger is not just that the company will
lose a customer, but that it will effectively hand the
customer to a competitor. At the other extreme, if the
customer’s experience of dealing with the company meets
or indeed surpasses their expectations, such that their
experiences are outstanding (or better), then the company’s
reputation will be given a boost and the relationship will be
strengthened (Jones & Sasser, 1995).
533
6.3. The role of technology in improving the customer
experience
Technology can make a major contribution to achieving
an outstanding customer experience. For example, within a
call centre, caller line identification (CLI) can identify the
caller and rules-based systems can accelerate important
customers up a large queue of calls; IVR can assist a
customer to find the most appropriate person to speak to
without multiple hand-offs; computer-telephony integration
(CTI) tools, in conjunction with CLI, can enable a customer’s computer records to instantaneously be called up and be
shown on the call centre operator’s screen. Together with an
empathetic and well-trained company representatives, these
technologies can dramatically improve the customer experience, in this case, in the contact centre environment.
The advent of increasingly sophisticated database technologies has greatly enhanced the ability of companies to
target and differentiate their products, customers, and
customer communications. Special search, analysis, and
tracking features also enable companies to monitor the
effectiveness and efficiency of marketing activity, and thus
to maximise the return on marketing expenditure. By
recording customer’s responses to different messages sent
through different communication channels, the company
can learn progressively more about its individual customers
and how they (and others like them) are likely to respond to
certain communications. Based on this information, the
company can develop models to use in predicting the
customer response behaviour of different segments to
various types of communication. These educated projections can then be employed to help marketers evaluate
alternative communications programmes and the probable
return on investment these might achieve. As a result, more
informed multichannel strategies can be developed.
7. Developing a multichannel strategy
Developing a multichannel strategy that delivers an
appropriate customer experience for a company’s key customer segments is essential to effective CRM. Our work has
identified six key steps involved in building a multichannel
strategy: develop strategic multichannel objectives, understand customer and channel touchpoints to leverage competitive advantage, undertake a strategic review of industry
structure and channel options, understand shifts in channel
usage patterns, review channel economics, and develop an
integrated channel management strategy. These steps are
now briefly described, drawing on the discussion above.
7.1. Develop strategic multichannel objectives
The starting point for formulating a multichannel strategy
is to determine the key strategic objectives. The overall
objective of multichannel integration is to provide a signif-
534
A. Payne, P. Frow / Industrial Marketing Management 33 (2004) 527–538
icantly enhanced customer experience that results in higher
customer satisfaction, and increased sales, profits, and share
of wallet. Ideally, this should be accompanied by a lower
cost to serve, through alternate channels, lower in the value
chain, e.g., from direct sales force to desk-based account
management or a shift from desk-based account management to the adoption or increase in the use of electronic
solutions.
Specific strategic objectives should be developed by a
company to reflect the earlier CRM strategy development
and value-creation processes. For example, the broad
objectives set for a new multichannel strategy by a leading
company for its major business clients included the
following:
Improve the customer experience
Increase account coverage
Improve revenue growth
Decrease operating expenses
Utilise the full skills and resources of our business and its
employees.
These objectives then should be translated into more
specific quantified ones. This may require a benchmarking
exercise by understanding experiences of similar companies
or undertaking a pilot project to better quantify potential
targets. The objectives are likely to be further refined as a
result of the further steps outlined below. For example, one
large UK industrial services firm developed specific objectives which included the following: improve total customer
experience as measured by customer satisfaction index by
12%; reduce cost of sale by 5%; increase account directors’
face-to-face selling time by 20%; and achieve revenue
growth of 15%. In this firm, a total of 16 target measures
were developed.
7.2. Understand customer and channel touchpoints to
leverage advantage
The needs, wants, and concerns of customers should be a
primary consideration in the design of marketing channels.
Central to this is undertaking a detailed customer segmentation that helps identify key needs and concerns at the
segment level and an integration of customer touchpoints
across channels. Understanding and managing customer
touchpoints or customer encounters represent an extremely
important part of multichannel integration and CRM. An
analysis of the customer’s needs, wants, and concerns helps
identify how such touchpoints can be leveraged to gain
advantage.
These needs, wants, and concerns need to be a viewed
over the entire life cycle of the customer relationship
(Vandermerwe, 1996). The stages of a customer relationship can be considered under the three broad headings of
acquisition, consolidation, and enhancement. These stages
can be broken down into more specific elements that will
vary depending on the business being considered. For
example, a computer manufacturer selling to business
customers identified the following key elements: marketing communications, prospecting and lead generation,
sales qualification, proposal generation, presales activity,
selling, installation, postsales service, and ongoing account
management.
Each of these elements may include many touchpoints
or encounters. The analysis of the needs, wants, and
concerns can help in gaining insight into how customers
experience relationships. To be able to develop the relationship process, objectives based on customer needs can
be designed for each relationship stage. After the objectives have been defined, the process can be analysed to
evaluate whether the current encounters and their content
will work towards achieving these objectives. This may
enable a reengineering of the touchpoint or encounter
contents (Storbacka, 2001a,b).
TNT Express UK is a good example of an organisation
dedicated to creating competitive advantage through understanding these touchpoints. TNT has developed a
programme called ‘the perfect transaction’ aimed at improving the customer experience across all their touchpoints with
customers. This programme involved identifying the needs,
wants, and concerns of their customers across different
channels and using econometric modelling to prioritise
them. The ‘perfect transaction’ involves improving the full
chain of encounters across all channels from when a
customer requests a collection to the time that payment is
received for the consignment. This initiative, which has
been highly successful, focuses on each person sharing in
the responsibility for seeking ‘perfection’ in each step of the
transaction.
7.3. Undertake a review of industry structure and channel
options
This step involves a review of the channel alternatives
currently being used by the company and those used by their
competitors as well as the potential for structural change by
means of disintermediation or reintermediation (Chircu &
Kauffman, 2000). This task can be assisted with a tool
called channel chain analysis that considers how a combination of channels are used at different stages of the
customer interaction with their supplier. McDonald and
Wilson (2001) apply channel chain analysis to the B2B
personal computer market and identify the different channel
structures utilised by competitors at different points in time.
For example, the traditional key account management structure is now mainly used only for large computers or large
accounts. A direct sales model was introduced by companies, such as Dell Computers, in the mid-1990s. In more
recent years, the Internet has been added to the channel mix.
Having understood past and present models, future channel
chain diagrams can be constructed and experimented with to
consider other options (McDonald & Wilson, 2001).
A. Payne, P. Frow / Industrial Marketing Management 33 (2004) 527–538
7.4. Understand shifts in channel usage patterns
The consideration of possible channel options can be
assisted by an understanding of how shifts will occur in
channel usage patterns. For example, the Web and e-mail
channels are growing at a much greater rate than traditional
channels, such as voice-based telephony (Forrester Research, 2001). Companies also have experienced significantly different rates of usage of different channels and
these usage patterns need to be considered as part of this
analysis. The authors have worked with one European bank
that identified greater product use in a new electronic
channel compared with existing channels. It is successfully
migrating customers to this channel, resulting in significant
increase in business.
An exploration of past trends and future forecast in
channel usage should be considered with respect to the
company’s customer segments. In addition, the relative
importance of different channels at different customer relationship life cycle stages for the product or proposition
needs to be considered. Usage of different channels by
different customer segments may vary considerably and, if
this is the case, the potential adoption curves for key
segments should be estimated.
7.5. Review channel economics
The next step is to review channel economics. In some
industries, marketing channel costs may represent over 40%
of the price paid by the customer, so these often represent a
prime opportunity for cost reduction (Bucklin, Defalco,
DeVincentis, & Levis, 1996). However, alternative channel
structures and channel options have widely differing economics in terms of transaction costs, infrastructural costs,
and relative usage.
Transaction costs across different channels vary so markedly that they are frequently the primary area of focus in
discussions on channel adoption (Nash, 2001). Not surprisingly, many businesses have rushed into the on-line channel
because of its low transaction costs. However, while channel
transaction costs are important, other aspects of channel
economics must also be explored. Studies, such as that
undertaken by McKinsey and Co. and Salomon Smith
Barney (2002) have demonstrated that the apparently low
transaction costs involved on selling on the Internet need to
be considered alongside other consideration, such as marketing, Web site development, fulfilment, and other costs.
535
and the channel economics. The economics of channels and
the relative degree of use of alternative channels by different
customer segments will have significantly different profit
outcomes. Understanding the different profit contributions
of customer segments and successfully exploiting this is a
factor of superior channel management.
Developing an integration channel management strategy
gives rise to the following issues: how to achieve brand
consistency in the formal communications programmes of
different channels; how to achieve consistency in the way
customers experience the company when they deal with its
various channels; how to ensure the communications and
services a customer receives through different channels are
coordinated and coherent, tailored to their particular interests, and cognisant of their previous encounters with the
company; and how to optimise the return on resources
deployed across different channels. As noted earlier, the
nature of the total customer experience across different
channels needs to be carefully addressed. The concept of
customer experience design is a relatively new concept.
However, recent work on experience design and managing
customer experiences have made a significant contribution
to our thinking in this area (Gilmour, 2000; Storbacka,
2001a,b).
The relative complexity of the interactions leading to the
sale and the costs of serving the channel in industrial
markets also need to be fully considered. Fig. 2 provides
an illustration of this in a B2B sector.
These channel options need to be considered in the
context of the channel participants or channel members that
are used (Marketbridge, 2003; McLaughlin, 2003). Selection of appropriate channel members, discussed earlier in
the paper, can result in different industry structures that may
include business partners, value-added resellers, other
intermediaries, as well as direct sales models. Each channel
member should utilise the most appropriate range of channel
alternatives.
7.6. Developing an integrated channel management strategy
This final step involves making decisions regarding how
the company’s strategic channel objectives will be achieved
through a properly integrated channel management strategy.
The choice of the appropriate multichannel strategy will
depend upon the desired customer experience for the key
target segments, the complexity of the channel interaction,
Fig. 2. Channel alternatives based on cost and the complexity of sale.
536
A. Payne, P. Frow / Industrial Marketing Management 33 (2004) 527–538
The examples of channel alternatives shown in Fig. 2
have different advantages and challenges. Each element of
customer interaction needs to be analysed to ensure the
appropriate channel is being engaged for that activity.
While the face-to-face channel used in much account
management is costly, it is necessary for complex tasks
and important customer segments. However, less complex
tasks may be handled for the same key customers through
other lower cost channels. Desk-based account management might involve a highly experienced salesperson who
can immediately access customer information and use it in
a highly interactive and customised manner, whilst telemarketing may deal with more routine sales, service, and
queries. The Internet and electronic channels provide the
opportunity for high-quality personalised self-service.
However, the development of this channel will be dependant on high-quality portals and customer education and
acceptance.
Companies, such as BT (McLaughlin, 2003) and IBM
(Fury, 2002), are now driving considerable cost out of their
account management structure by introducing new innovations in this area. The creation of a differentiated and
superior value proposition hinges on the provision of open
and responsive interactions and dialogue with customers.
This means actively recognising what are the best channels
for reaching individual customers and what channels
individual customers prefer to use for different tasks,
how they use them at present and how their usage in the
future may change.
8. Conclusion
This paper has examined the role of multichannel integration process in CRM and discussed how CRM unites
relationship marketing and channel management with the
objective of delivering profitable, long-term customer relationships. In this final section of the paper, we review some
of the key managerial issues and challenges faced by
enterprises in their adoption of an integrated multichannel
approach and identify some promising areas for future
research.
8.1. Managerial issues
A comprehensive multichannel integration strategy that
has the support of both staff and management is essential for
any company that wishes to maintain a first-class level of
customer experience within and across its range of channels.
Today’s customers require service in a multitude of channels, including the Internet, face to face, WAP and 3G
applicatons, call centres, and so forth. These customers are
individuals, be they corporate customers or final consumers.
A review of research and experience in examining companies implementing a multichannel approach involving adding new channels suggests that a number of practical issues
need to be considered by managers wishing to adopt a
similar approach.
First, in offering a range of channels to customers, it is
important that the right message is sent to customers and
that the benefits do not seem too one sided. Some companies emphasise the benefits to themselves of a multichannel
approach as opposed to the benefits to their customers.
This problem has been especially highlighted by Schultz
(2002).
Second, extensive communication to staff of the new
multichannel approach is essential. Companies have
learned that their use of a blend of channels to service
their customers seems to require constant explanation to
employees.
Third, sales force behaviour needs to change. Sales staff,
in particular, need to be taken through the economic arguments as well as an explanation of any likely impact on their
work role and their remuneration. Change management and
employee engagement issues are important here.
Fourth, the technology required to support integration of
the off-line and on-line channels can only be prescribed
once a single clear of the business processes and associated
channel ‘maps’ are agreed on across marketing, sales, and
service.
Fifth, companies should be aware how one channel may
seek to sabotage other channels’ efforts. Unless there is a
sufficient incentive for staff to behave in a mutually supportive way, the correct channel hand-off to make the
integrated channel management strategy work may not
happen.
Finally, there needs to be clear reason behind why
integrated channel management strategy is being adopted.
In many cases, this will be driven by strong competitive
pressures and a need to create differentiation. Based on
well-known principles of change management, the creation
of a sense of urgency will help combat the considerable
resistance to change that may be encountered.
8.2. Future research
There exists considerable scope for future research in this
area. We draw attention to several areas of worthwhile
research.
First, empirical work is needed into the adoption of new
channels by enterprises in the context of their CRM strategies. How is the nature of channel usage changing over
time and what are the outcomes of shifts in channel usage
amongst customers? What are the sector-specific challenges
confronting organisations in multichannel integration?
Second, how do organisations determine new channels
when engaging with customers? How do they identify and
attract early adopters? Providing products and services in
both traditional and new channels is highly important for
companies that want to meet the expectations of opinion
leaders and ‘forerunner’ customers. What is the reaction of
different customer segments to different channel options? Of
A. Payne, P. Frow / Industrial Marketing Management 33 (2004) 527–538
special interest in this area is the adoption and use of new
mobile technologies.
Third, a more exhaustive channel strategy taxonomy, in
the context of companies’ CRM strategies, needs to be
developed. We have identified six broad channel strategies
based on a consideration of more than 30 companies we
examined. A more comprehensive study would not only
adopt a larger sample, but would explore the motives behind
selection of actual channel strategies as well as identifying
the extent to which a strategic CRM perspective was a
driver of their adoption.
Fourth, how should organisations identify the level of
service appropriate to different channels? Experience suggests that customers have different expectations with respect
to issues, such as response times in different channels, such
as on the telephone and the Internet. What are the experiences of best-in-class companies and what are the best
assessment tools? How, as discussed earlier, can brand
consistency be best managed across different channels?
Fifth, work needs to be done in the area of measurement
of customer experience in a multichannel environment. This
would involve extending data collection to capture information at each channel interface, especially in a face-to-face
context where data capture is often incomplete or nonexistent. This is of obvious importance because the quality of a
company’s service is only as high as the weakest link in its
multichannel strategy.
Finally, academic case-based research needs to be carried
out in those companies who have developed successful
channel migration strategies and had significant economic
benefit and customer satisfaction improvement as a result of
shifts in channel usage. Channel consultancies, such as
Marketbridge, have developed highly successful approaches
for its clients that involve migration of B2B customers to
lower cost channels with an accompanying improvement in
customer satisfaction. As the multichannel environment
becomes increasingly more competitive in the new millennium, there will be continued pressure on organisations,
whether new or traditional, to learn from case-based research about how to improve the economics of multichannel
performance and achieve higher levels of customer satisfaction and intimacy.
Acknowledgements
The support of SAS UK and BT plc are gratefully
acknowledged.
References
Berry, L. L. (2003). Relationship marketing. In L. L. Berry, G. L. Shostack,
& G. D. Upah (Eds.), Emerging perspectives on services marketing
( pp. 25 – 28). Chicago: American Marketing Association.
Boothby, K. (2003). Pampers—relationship building using multiple channels. Interactive Marketing, 5(2), 166 – 170.
537
Bucklin, C. B., Defalco, S. D., DeVincentis, J. R., & Levis, J. P. (1996). Are
you tough enough organisation to manage your channels. The McKinsey
Quarterly, 1, 106.
Butanay, G., & Wortzel, L. H. (1988, January). Distributor power versus manufacturer power: The customer role. Journal of Marketing,
52 – 53.
Buttle, F. A. (2001, February). The CRM value chain. Marketing Business,
52 – 55.
Chircu, A. M., & Kauffman, R. J. (2000, Summer). Reintermediation strategies in business-to-business electronic commerce. International Journal of Electronic Commerce, 4(4), 7 – 42.
Christopher, M., Payne, A., & Ballantyne, D. (2002). Relationship marketing: Creating stakeholder value. Oxford: Butterworth Heinemann.
Clegg, A. (2001, February). Channel integration. Database Marketing,
10 – 14.
Courtheoux, R. L. (2003). Modelling multichannel response behaviour.
Interactive Marketing, 5(2), 117 – 130.
Forrester Research (2001, December). Customer application servers, Forrester research report.
Funk, J. L. (2002). Mobile shopping and multi-channel integration
in the Japanese mobile industry. Working Paper, Research Institute for Economics and Business Administration Kobe, University,
April.
Fury, T. (2002, February). Building and measuring marketing ROI through
channel strategy: A multichannel approach takes marketing closer to the
close. Eighth annual ISBM/CBIM joint conference, the center for business and industrial marketing, Georgia State University, Atlanta, Georgia ( pp. 7 – 8).
Gilmour, P. (2000). The experience economy. Boston: The Free Press.
Godin, S. (1999). Permission marketing. New York: Simon and Schuster.
Grönroos, C. (1994). From marketing mix to relationship marketing: Towards a paradigm shift in marketing. Management Decision, 32(2),
4 – 20.
Grönroos, C. (1996). Relationship marketing: Strategic and tactical implications. Management Decision, 34(3), 5 – 14.
Gummesson, E. (1999). Total relationship marketing. Oxford: Butterworth.
Hobby, J. (1999, October). Looking after the one who matters. Accountancy
Age, 28, 28 – 30.
Johnson, B. A. (2000). Fault lines in CRM: New-commerce business
models and channel integration issues in Andersen Consulting. Defying
the limits. San Francisco: Montgomery Research Inc.
Jones, T., & Sasser, W. E. (1995, November – December). Why satisfied
customers defect. Harvard Business Review, 88 – 99.
Khanna, S. (2001). Measuring the CRM ROI: Show them benefits,
www.crm-forum.com.
Kotler, P. (1990). Speech presented at the trustees meeting of the marketing
science institute. Boston.
Kraft, K. J. (2000). Multi-channel customer management solutions: Making
sense of the operational issues and deployment alternatives. Chicago:
eLoyalty Corporation White Paper.
Kutner, S., & Cripps, J. (1997). Managing the customer portfolio of healthcare enterprises. The Healthcare Forum Journal, 4(5), 52 – 54.
Lancioni, R., Schau, J. S., & Smith, M. F. (Eds.). (2003). Internet impacts
on supply chain management. Special issue. Industrial Marketing Management, 32(3).
Lanning, M. (2000). Delivering profitable value: A revolutionary framework to accelerate growth, generate wealth, and rediscover the heart of
business. Cambridge, MA: Perseus Press.
Marketbridge (2003). See www.marketbridge.com.
McDonald, M., & Dunbar, I. (1998). Market segmentation: How to do it,
how to profit from it (2nd ed.). Basingstoke: Macmillan Business.
McDonald, M., & Wilson, H. (2001). Serving customers through multiple
channels. In S. Rock (Ed.), Unlocking customer value ( pp. 19 – 25).
London: CBI Business Guide/Caspian Publishing.
McKinsey and Company, and Salomon Smith Barney Study (2002). Summary reported in press release on McKinsey website: www.mckinsey.
com.
538
A. Payne, P. Frow / Industrial Marketing Management 33 (2004) 527–538
McLaughlin, D. (2003). Major business integrated multi-channel strategy,
www.downloads.bt.com/crm/5.21_IMCP_whitepaperMcLaughlin.
Moriarty, R. T., & Moran, U. (1990, November – December). Managing
hybrid marketing systems. Harvard Business Review, 145 – 55.
Nalder, M. (2001). Multiple channel integration: A case study from the
UK travel industry, presentation at Cranfield School of Management,
17 May, Cranfield University.
Nash, T. (Ed.). (2001). Relationship management. Greenwich: Director’s Publication.
Payne, A. F. T. (2003). A strategic framework for CRM, draft working
paper, Cranfield School of Management, Cranfield University.
Payne, A. F. T. (2003). The importance of effective CRM, paper presented at
AMA Conference: Message in a Bottle, Poole, UK, 16 – 18 July.
Payne, A. F. T., & Frow, P. (1999). Developing a segmented service strategy: Improving measurement in relationship marketing. Journal of
Marketing Management, 15(8), 797 – 818.
Payne, A. F. T., & Frow, P. (2004). A Strategic Framework for Customer
Relationship Management. Cranfield University Working Paper, in
review.
Peppers, D., Rogers, M. (1993). The one to one future. London: Piatkus.
Peppers, D., Rogers, M., & Dorf, B. (1999). Is your company ready for
one-to-one marketing? Harvard Business Review, 77(1), 151.
Pine, J. (1993). Mass customization. Boston: Harvard Business School
Press.
Rosenbloom, B. (1999). Marketing channels: A management view (6th ed.).
Fort Worth, TX: The Dryden Press.
Ryals, L., & Payne, A. F. T. (2001). Information empowered relationship
marketing: Leveraging customer information in financial services. Journal of Strategic Marketing, 9, 1 – 25.
Schultz, D. (2002, April). Multi-channel: New term, old challenges. Marketing News, 29, 10.
Sheth, J. N., & Parvatiyar, A. (2000). The handbook of relationship marketing. Thousand Oaks, CA: Sage.
Slater, S. F., & Olson, E. M. (2002). A fresh look at industry and market
analysis. Business Horizons, 15 – 22.
Smith, K. (2001, November). Getting payback from CRM, Webcast on
CRMGuru.com.
Smith, M., & Wheeler, J. (2002). Managing the customer experience.
London: Prentice Hall.
Stone, M., & Woodcock, N. (2001). Defining CRM and assessing its quality. In B. Foss, & M. Stone (Eds.), Successful customer relationship
marketing ( pp. 3 – 20). London: Kogan.
Storbacka, K. (2001a, 15 March). Customer Relationships as Assets: Evaluating the Impact of CRM on Your Organization’s Profitability and
Shareholder Value, presentation at CREDO Conference, Paris.
Storbacka, K. (2001b). RED—Relationship experience design. Helsinki:
CRM Group.
Sudharshan, D., & Sanchez, R. (1998). Distribution equity: Creating value
through managing knowledge relationships with distribution channels.
Journal of Market Focused Management, 2, 309 – 338.
Vandermerwe, S. (1996). The eleventh commandment. Chichester: Wiley.
Wagner, T. R. (2000). Multichannel customer interaction in Andersen Consulting. Defying the limits. San Francisco: Montgomery Research Inc.
Wilson, H., McDonald, M., Hobbs, M., & Dolder, C. (2003). Optimising
multi-channel performance. Cranfield: IBM/Cranfield White Paper.
Dr. Adrian Payne is Professor of Services and Relationship Marketing and
Director of the Centre for Relationship Marketing at the Cranfield School of
Management, Cranfield University, UK. His research interests include the
development and implementation of CRM strategies, relationship marketing, customer retention, and services marketing.
Dr. Pennie Frow is a Visiting Fellow in the Cranfield School of Management at Cranfield University, UK. Her research interests are in CRM,
employee commitment, customer retention, and internal marketing. She is a
psychologist with a special interest in assisting organisations undergoing
change.