Radio Transmitters

When the mechanisms of fading channels were first modeled in the 1950s and 1960s, the ideas were primarily applied to over-the-horizon communications covering a wide range of frequency bands. The 3-30 MHz high-frequency (HF) band is used for ionospheric communications, and the 300 MHz-3 GHz ultra-high-frequency (UHF) and 3-30 GHz super-high-frequency (SHF) bands are used for tropospheric scatter. Although the fading effects in a mobile radio system are somewhat different than those in ionospheric and tropospheric channels, the early models are still quite useful to help characterize fading effects in mobile digital communication systems. This tutorial addresses Rayleigh fading primarily in the UHF band. That affects mobile systems such as cellular and personal communication systems (PCS). Part I of the tutorial itemizes the fundamental fading manifestations and types of degradation

Abstract— In some private mobile radio/public access mo-bile radio (PMR/PAMR) applications, there is a stringent need for high-coverage locations probabilities. A spectrally efficient approach in this case is the use of several radio transmitters operating in simulcast mode. ...

We evaluate the performance of three direct-detection orthogonal frequency-division multiplexing (OFDM) schemes in combating multipath distortion in indoor optical wireless links, comparing them to unipolar M-ary pulse-amplitude modulation (M-PAM) with minimum mean-square error decision-feedback equalization (MMSE-DFE). The three OFDM techniques are DC-clipped OFDM and asymmetrically clipped optical OFDM (ACO-OFDM) and PAM-modulated discrete multitone (PAM-DMT). We describe an iterative procedure to achieve optimal power allocation for DC-OFDM. For each modulation method, we quantify the received electrical SNR required at a given bit rate on a given channel, considering an ensemble of 170 indoor wireless channels. When using the same symbol rate for all modulation methods, M-PAM with MMSE-DFE has better performance than any OFDM format over a range of spectral efficiencies, with the advantage of (M-PAM) increasing at high spectral efficiency. ACO-OFDM and PAM-DMT have practically identical performance at any spectral efficiency. They are the best OFDM formats at low spectral efficiency, whereas DC-OFDM is best at high spectral efficiency. When ACO-OFDM or PAM-DMT are allowed to use twice the symbol rate of M-PAM, these OFDM formats have better performance than M-PAM. When channel state information is unavailable at the transmitter, however, M-PAM significantly outperforms all OFDM formats. When using the same symbol rate for all modulation methods, M-PAM requires approximately three times more computational complexity per processor than all OFDM formats and 63% faster analog-to-digital converters, assuming oversampling ratios of 1.23 and 2 for ACO-OFDM and M-PAM, respectively. When OFDM uses twice the symbol rate of M-PAM, OFDM requires 23% faster analog-to-digital converters than M-PAM but OFDM requires approximately 40% less computational complexity than M-PAM per processor.

We have presented the first fully integrated fractional-N PLL with on-chip VCO and on-chip modulator that meets the GSM specifications for both a receive mode synthesizer and a modulating PLL with 270.83 kbps GMSK data. Power consumption of the PLL is 13 mW in the RX synthesizer mode and 17 mW in the TX modulation mode. The circuit is fully digital, except for the loop filter which carries the analog VCO control voltage.