Scanning Electron Microscopy

d e n t a l m a t e r i a l s 2 6 ( 2 0 1 0 ) 600-607 a v a i l a b l e a t w w w . s c i e n c e d i r e c t . c o m j o u r n a l h o m e p a g e : w w w . i n t l . e l s e v i e r h e a l t h . c o m / j o u r n a l s / d e m a a b s t r a c t Objectives. Resin-modified glass ionomers (RMGI) have demonstrated clinical success providing immediate and long-term relief from root sensitivity. RMGIs have been recently introduced as paste-liquid systems for convenience of clinical usage. The objective of this study was to measure the ability of a new paste-liquid RMGI to reduce fluid flow through human dentin, compared to an established single-bottle nanofilled total etch resin adhesive indicated for root desensitization.

Direct foaming of colloidal suspensions is a simple and versatile approach for the fabrication of macroporous ceramic materials. Wet foams produced by this method can be stabilized by longchain surfactants or by colloidal particles. In this work, we investigate the processing of particle-stabilized wet foams into crack-free macroporous ceramics. The processing steps are discussed with particular emphasis on the consolidation and drying process of wet foams. Macroporous alumina ceramics prepared using different consolidation and drying methods are compared in terms of their final microstructure, porosity, and compressive strength. Consolidation of the wet foam by particle coagulation before drying resulted in porous alumina with a closed-cell structure, a porosity of 86.5%, an average cell size of 35 lm, and a remarkable compressive strength of 16.3 MPa. On the other hand, wet foams consolidated via gelation of the liquid within the foam lamella led to porous structures with interconnected cells in the size range from 100 to 150 lm. The tailored microstructure and high mechanical strength of the macroporous ceramics can be of interest for the manufacture of bio-scaffolds, thermal insulators, impact absorbers, separation membranes, and light weight ceramics.

Permanent link to open access version: http://hdl.handle.net/10523/10586

Materialising Ancestral Madang documents the emergence of pottery production processes and exchange networks along the northeast coast of New Guinea during the last millennium before the present. This dynamic period in the Pacific’s human past involved important fluctuations to people’s mobility, social interaction, and technological organisation. It therefore remains crucial to understanding and historicising the expansive maritime subsistence trading networks that famously characterised the coast in the late 19th and early 20th centuries. This book investigates these transformations by exploring the archaeology of Madang District; the heart of the Madang exchange network that revolved around the production and distribution of distinctive red-slipped pots. Potsherds of this style have been previously found spanning a 200 km radius, reaching Karkar Island, the Bismarck Archipelago, and even the New Guinea Highlands. By combining archaeological survey, excavation, craft ethnography, and archaeometric analyses, the volume systematically delineates the production groups that were working within this broader community of practice. The study shows that pre-colonial potters made use of a range of local raw materials and were free to improvise with their forming and decorating techniques but learned and reproduced similar technological sequences over the past 500–600 years. It is likely that social restrictions permitted only potters from a small number of clans to produce ceramics and that the finished vessels were then distributed both informally within the local area and strategically during extensive trade voyages along the northeast coast of New Guinea. These results therefore cast light on an important but previously obscured aspect of Pacific culture history and provide a model for how craft production and exchange processes have manifested and co-modified across the generations

Ordered (SBA-15) and disordered (KIL-2) mesoporous silica supports have been synthesized and used for incorporation of titania with different Ti/Si molar ratios (1/2, 1/1, 2/1) via sol–gel impregnation method. Titanium isopropoxide and aqueous titania sol prepared by low-temperature sol–gel processing were used as a source of titania. Characterization by powder X-ray diffraction (XRD), nitrogen sorption measurements, scanning electron microscopy (SEM) and UV–vis–NIR diffuse reflectance spectroscopy (DRS) has been carried out to investigate the chemical framework and morphology of powders. The photocatalytic degradation of isopropanol in the gaseous medium was selected as a probe reaction to test the photoactivity of powders and to verify the potential application of these materials for air remediation. It was found that the titania source, Ti/Si molar ratio and the type of silica support influenced the functional properties of the material, which were evaluated by adsorption capacity and photocatalytic activity in the gas–solid reactor. The adsorption capacity of isopropanol was the highest in the presence of the SBA-15-supported materials. The photoactivity results indicated that the powders which were prepared using SBA-15 as a silica support and a Ti/Si molar ratio of 1/1 were the most active towards isopropanol oxidation monitored in situ by FT-IR spectroscopy.

To prepare miscible polyethylene glycol diacrylate/polyvinylidene fluoride ͑PEGDA/PVdF͒ blend gel polymer electrolytes, low molecular weight (M ϭ 742) liquid PEGDA oligomer was mixed with PVdF-HFP dissolved in ethylene carbonate/dimethyl carbonate/LiPF 6 liquid electrolytes, and then cured under ultraviolet irradiation. Room temperature conductivity of PEGDA/PVdF blend films was found to be comparable to that of PVdF-HFP gel polymer electrolytes, and they were electrochemically stable up to 4.6 V vs. Li/Li ϩ. Scanning electron micrographs revealed that PEGDA/PVdF blend electrolytes have pore size intermediate between dense PEGDA and highly porous PVdF-HFP. It was confirmed by weight change measurement that liquid electrolyte was likely to evaporate through large pores in PVdF-HFP at 80°C, while PEGDA/PVdF blend showed better liquid electrolyte retention ability. This result was in good agreement with more stable interfacial properties of PEGDA/PVdF blend at 80°C in ac impedance analysis. Consequently, both PVdF-HFP and PEGDA/PVdF gel polymer electrolytes delivered similar discharge capacity at room temperature, but PEGDA/PVdF blend gel polymer electrolyte showed much better cycle performance than pure PVdF-HFP at 80°C.

Aim  To evaluate marginal seal, water sorption, solubility and loss of mass after brushing of several temporary filling materials.Methodology  For marginal seal, Class I cavities, including endodontic access preparations, were made in human molar teeth and restored using one or other of several temporary filling materials (n = 10): zinc oxide/calcium sulphate-based cement (Cavit, 3M,ESPE, St. Paul, MN, USA), zinc oxide/eugenol cement (IRM, Dentsply Caulk, Milford, DE, USA), glass ionomer cement (Vidrion R, SSWhite, Rio de Janeiro, RJ, Brazil) or a dimethacrylate-based filling (Bioplic, Biodinâmica, Londrina, PR, Brazil). Dye penetration was assessed after thermocycling and immersion in 0.5% basic fuchsine solution. For water sorption, solubility and loss of mass analyses, disc-shaped specimens were made. Water sorption and solubility were evaluated by mass alteration after storage in distilled water for 7 days (n = 7). Loss of mass was calculated based on the difference of mass after abrasion with a toothbrush (n = 5), and surfaces were analysed by SEM. Data of water sorption, solubility and loss of mass were submitted to anova and Tukey’s test, and marginal sealing data to Kruskal–Wallis test (P < 0.05).Results  Statistically significant differences were observed for marginal sealing (P < 0.0001), water sorption (P < 0.01), solubility (P < 0.01) and loss of mass (P < 0.05). Bioplic had the best marginal seal. Cavit had the greatest water sorption and solubility. Vidrion R and Bioplic had the lowest solubility. Loss of mass after brushing was higher for Cavit, followed by Bioplic, IRM and Vidrion R. Cavit and Vidrion R were worn aggressively by brushing.Conclusions  The resin-based temporary filling Bioplic produced the best marginal seal, and was associated with the lowest water sorption, solubility and loss of mass.

Response surface methodology (RSM) was used to optimize the conditions for the production of endo ␤-1,4 glucanase, a component of cellulase by Aspergillus nidulans MTCC344 under solid state fermentation, using bagasse as the chief substrate. A four-factor-five-level central composite design was employed for experimental design and analysis of the results. Maximum cellulase activity (CMCase was 28.96 U g −1) can be attained at the optimum conditions, 16.8 mm bagasse bed height, 60% moisture content, pH 4.25 and temperature 40 • C in the solid state fermenter. These data were rather close to the experimental results obtained (CMCase was 28.84 U g −1). A. nidulans MTCC344 was able to hydrolyze pretreated bagasse completely after 8 days of incubation with significant endo ␤-1,4 glucanase activities. The results of Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM) of bagasse showed structural changes through pretreatment, in favor of enzymatic hydrolysis. Bagasse with alkali pretreatment using sodium hydroxide is a source of lignocelluloses able to improve the yield of endo ␤-1,4 glucanase by the strain of A. nidulans. The endo ␤-1,4 glucanase produced during the bioconversion of cellulose to glucose by A. nidulans MTCC344 is strongly dependent on the pretreatment given before hydrolysis.

Biological and technical failures of implants have already been reported. Mechanical factors are certainly of importance in implant failures, even if their exact nature has not yet been established. The abutment screw fracture or loosening represents a rare, but quite unpleasant failure. The aim of the present research is an analysis and structural examination of screw thread or abutment loosening compared with screw threads or abutment without loosening. The loosening of screw threads was compared to screw thread without loosening of three different implant systems; Branemark (Nobel Biocare, Gothenburg, Sweden), T.B.R. implant systems (Benax, Ancona, Italy) and Restore (Lifecore Biomedical, Chaska, Minnesota, USA). In this study broken screws were excluded. A total of 16 screw thread loosenings were observed (Group I) (4 Branemark, 4 T.B.R and 5 Restore), 10 screw threads without loosening were removed (Group II), and 6 screw threads as received by the manufacturer (unused) (Group ...

In the treatment of photoaged skin, glycolic acid works by removing superficial portions of the epidermis and stimulating dermis regeneration. Vitamins A, C, and E should stimulate collagen production and antioxidants should prevent free radical damage and skin aging. However, the effectiveness of different therapies has often relied on subjective methods of assessment. Histologic analysis has seldom been used because of the drawback of permanent scarring. In the literature, the use of a quantitative method for the assessment of facial rejuvenation has been described: the silicone replica technique. The authors&#39; aim was to promote and recommend the use of this technique and, in particular, to test the effect of glycolic acid and multivitamin- and antioxidant-based products on skin texture. The authors performed a prospective, randomized, double-blind, controlled study on 30 women treated topically in the outer canthal region (crow&#39;s-feet area). Patients were divided into thr...

The aim of this work was to formulate sodium alginate nanospheres of amphotericin B by controlled gellification method and to evaluate the role of the nanospheres as a "passive carrier" in targeted antifungal therapy. Methods: Sodium alginate nanospheres of amphotericin B were prepared by controlled gellification method, and the particle size analysis was carried out by scanning electron microscopy. The carrier capacity of sodium alginate was evaluated in terms of drug to polymer ratio. In vitro release study was carried out on all drug loaded nanospheres by the dialysis method. Release kinetics of drug from different drug loaded nanospheres was also determined. The in vivo antifungal efficacy of nanospheres bound drug vis-à-vis the free drug was evaluated in candidiasis-induced mice models. Results: Preparation of nanospheres through controlled gellification method yielded particles with a size range of 419.6 ± 0.28 nm. Studies on drug to polymer ratio showed a linear relationship between concentration of drug and drug loading capacity. In vitro release kinetic study revealed that the release of drug from the nanospheres followed Fickian diffusion. In vivo studies showed that the nanospherebound drug produced a higher antifungal efficacy than the free drug. Conclusion: The formulated sodium alginate nanospheres containing amphotericin B was found to have better antifungal activity when compared to the free drug and also yielded sustained in vitro release.

N-acetyl-β-D-hexosaminidase was purified from wheat bran and characterized. The purified enzyme showed two protein bands on sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) with molecular mass of 75 and 78 kDa. The enzyme exhibited optimum pH and temperature at 5.0 and 50 o C, respectively. The enzyme was active on the substrates of p-nitrophenyl-Nacetyl-β-D-glucosaminide (pNP-GlcNAc) and p-nitrophenyl-Nacetyl-β-D-galactosaminide (pNP-GalNAc), whereas inactive on pNP-β-D-glucopyranoside, pNP-β-D-galactopyranoside, swollen chitin, and colloidal chitin, suggesting high substrate specificity. The enzyme activity for pNP-GlcNAc was stable at pH 3-6 and under 50 o C. The K m , V max and K cat for pNP-GlcNAc were 0.014 mM, 0.05 µmol/min, and 3.01×10 6 min −1 , respectively. The enzyme could be completely inhibited at 1-10 mM HgCl 2 and AgNO 3, suggesting that the intact thiol group is essential for activity. β-N-Acetylhexosaminidase from wheat bran could inhibit the conidial germination and digest the hyphae of Fusarium solani.

CaP ceramic has been widely used as coating on metals in orthopedics and oral dentistry. Variations in CaP composition can lead to different dissolution/precipitation behavior and may also affect the bone response. In the present study calcium pyrophosphate and hydroxylapatite coatings were successfully prepared by RF magnetron sputtering deposition. The phase composition, morphological properties, and the dissolution in SBF were characterized by using XRD, FTIR, EDS, SEM, and spectrophotometry. The results showed that all the sputtered coatings were amorphous and changed into a crystal structure after IR-radiation. The temperature for the crystallization of the amor-phous coatings is lower for the hydroxylapatite coating (550°C), compared to the calcium pyrophosphate coating (650°C). All sputtered amorphous coatings were instable in SBF and dissolved partially within 4 wks of incubation. The heat-treated coatings appeared to be stable after incubation. These results showed that magnetron sputtering of calcium pyrophosphate coating is a promising method for forming a biocompatible ceramic coating.

Nanocrystalline zinc oxide-thin films have drawn the attention of researchers due to its attractive properties like transparency in visible region, abundance in nature and gas sensitivity. Nanostructured Zinc oxide (ZnO) thin films were grown on silicon, alumina and glass substrates at various substrate temperatures using a 6 kW electron beam evaporation technique. The effects of film thickness, growth temperature and substrate on the crystallinity of deposited ZnO films were investigated using X-ray diffraction, scanning electron microscopy, optical absorption and photoluminescence studies. Our studies show that good quality films are obtained for silicon substrate for a growth temperature of 2508 8 8 8 8C. Film thickness plays an important role on the evolution of the nanostructures. SEM studies combined with XRD analysis reveal that ultrathin nanorods are grown with (002), (101) and (102) orientations. All the ZnO films show room temperature photoluminescence emission bands at 394 nm and 468 nm. Optical absorption studies show strong absorption at 377 nm. Details of the structure and optical properties correlation will be presented and potential of a simple technique such as e-beam deposition to grown ZnO nanostructures suitable for optoelectronic application will be assessed.

HDPE Aspergillus tubingensis VRKPT1 Aspergillus flavus VRKPT2 Fourier transformed infra-red spectroscopy Scanning electron microscopy a b s t r a c t High density polyethylene (HDPE) is the most commonly found non-degradable solid waste among the polyethylene. In this present study, HDPE degrading various fungal strains were isolated from the polyethylene waste dumped marine coastal area and screened under in vitro condition. Based on weight loss and FT-IR Spectrophotometric analysis, two fungal strains designated as VRKPT1 and VRKPT2 were found to be efficient in HDPE degradation. Through the sequence analysis of ITS region homology, the isolated fungi were identified as Aspergillus tubingensis VRKPT1 and Aspergillus flavus VRKPT2. The biofilm formation observed under epifluorescent microscope had shown the viability of fungal strains even after one month of incubation. The biodegradation of HDPE film nature was further investigated through SEM analysis. HDPE poses severe environmental threats and hence the ability of fungal isolates was proved to utilize virgin polyethylene as the carbon source without any pre-treatment and pro-oxidant additives.

Ahs~ract-Morphological studies on graphite surfaces by scanning electron microscopy are presented for tubes made from total pyrolytic graphite (TPG). The inner surface of TPG tubes was found to be fairly rough due to adhering residues of the polycrystalline electrographite substrate on which they were deposited. These residues were vaporized on subsequent dry heating of the tube and recondensed on the tube surface in the form of nodules and flakes. The residues disappeared entirely when the tube was heated with an analyte solution. All experiments were continued for about 550 atomization cycles, and all tubes appeared to be in good condition at that point. The sensitivity for vanadium in dilute nitric acid and for molybdenum in iron, however, had decreased by about 50% during the experiment. The signal for phosphorus in the presence of lanthanum as the modifier disappeared almost entirely and that for copper in perchloric acid was very erratic throughout the experiment. However, it was not always possible to correlate a change in analytical performance with a visible corrosion pattern. The absence of any secondary carbon coating on the inner surface of the TPG tubes was considered to be the main reason for the inconsistency of analytical signals. Primary faults caused by irregular crystal growth were found to be the most likely locations for corrosive attack. Delamination, exfoliation and pitting were the types of corrosion found in all tubes, the extent, however, was dependent on the matrix used in a particular experiment.

The aim of the present study was to prepare, optimize and characterize ketoprofen proniosomes. The niosomes were prepared using a slurry method followed by in vitro evaluation after embedding the proniosomes-derived niosomes into a carbopol matrix. A central, composite Box-Wilson design was used for the optimization with the total lipid concentration (X 1 ), surfactant loading (X 2 ) and amount of drug (X 3 ) as the independent variables. Prepared proniosomes were characterized for percentage drug entrapment (PDE) and mean volume diameter (MVD). Multiple regression analysis and contour plots were used to relate the dependent and independent variables. Checkpoint batches were also prepared to prove the validity of the evolved mathematical model and contour plots. The optimization model predicted the levels of X 1 , X 2 and X 3 (-1, -0.3 and 0.92, respectively), for a maximized response of PDE with constraints of ≤ 5 μm on MVD. Optimized batch was used to prepare a niosomal gel, which showed significantly higher cumulative amount of drug permeated and steady state transdermal flux compared to plain gel. This work has demonstrated the use of the central composite Box-Wilson design, regression analysis, and contour plots in optimizing ketoprofen proniosomes. Developed niosomal gel formulation has also demonstrated permeation enhancement of ketoprofen compared to plain gel.

SnS is of interest for use as an absorber layer and the wider energy bandgap phases e.g. SnS 2 , Sn 2 S 3 and Sn/S/ O alloys of interest as Cd-free buffer layers for use in thin film solar cells. In this work thin films of tin sulphide have been thermally evaporated onto soda-lime glass substrates with the aim of optimising the properties of the material for use in superstrate configuration device structures. The thin films were characterised using energy dispersive X-ray analysis (EDS) to determine the film composition, X-ray diffraction (XRD) to determine the phases present and structure of each phase, transmittance versus wavelength measurements to determine the energy bandgap and scanning electron microscopy (SEM) to observe the surface topology and topography. These properties were then correlated to the deposition parameters. Using the optimised conditions it is possible to produce thin films of tin sulphide that are pinhole free and conformal to the substrate that are suitable for use in thin film solar cell structures.

Scanning electron microscopy/energy dispersive X-ray spectrometry (SEM/EDS) is a widely applied elemental microanalysis method capable of identifying and quantifying all elements in the periodic table except H, He, and Li. By following the "k-ratio" (unknown/standard) measurement protocol development for electron-excited wavelength dispersive spectrometry (WDS), SEM/EDS can achieve accuracy and precision equivalent to WDS and at substantially lower electron dose, even when severe X-ray peak overlaps occur, provided sufficient counts are recorded. Achieving this level of performance is now much more practical with the advent of the highthroughput silicon drift detector energy dispersive Xray spectrometer (SDD-EDS). However, three measurement issues continue to diminish the impact of SEM/EDS: (1) In the qualitative analysis (i.e., element identification) that must precede quantitative analysis, at least some current and many legacy software systems are vulnerable to occasional misidentification of major constituent peaks, with the frequency of misidentifications rising significantly for minor and trace constituents. (2) The use of standardless analysis, which is subject to much broader systematic errors, leads to quantitative results that, while useful, do not have sufficient accuracy to solve critical problems, e.g. determining the formula of a compound. (3) EDS spectrometers have such a large volume of acceptance that apparently credible spectra can be obtained from specimens with complex topography that introduce uncontrolled geometric factors that modify X-ray generation and propagation, resulting †This article is a U.S. government work and, as such, is in the public domain in the United States of America.

Electrospinning was utilized to create lightweight, electrically responsive wing skins for micro-air vehicle (MAV) wing frame designs. Various compositions of an electroactive polymer were investigated to determine the appropriate electrospinning conditions for these materials. Electrospun mats of these materials were characterized via optical microscopy and scanning electron microscopy. Tensile properties of the electrospun fibers were also measured. An optimal polymer composition was electrospun onto MAV wing frames to create a bird wing-like texture. Preliminary testing of electroactivity of these prototype MAV wings is reported here. q

Ultrastructural Studies of Conidiogenesis of Ascochyta rabiei, the Causal Organism of Chickpea Blight EJ. Singh, a Mahendra Pal 2 and Nam Prakash a Studies employing transmission (TEM) and scanning (SEM) electron microscopy revealed that conidiogenous cells of the chickpea blight fungus, Ascochyta rabiei (Pass.) Labr., resembled phialides in most of their features. The phialides were generally of a simple type, but occasionally they proliferated in a percurrent fashion. There is enough evidence to suggest that the fungus is better placed in genus Phoma. SEM has been employed for the first time to study internal details of fructifications of a closed type in coelomycete fungi. KEY WORDS: Ascochyta rabiei; chickpea blight; ultrastructure; taxonomy; chickpea; scanning electron microscopy; transmission electron microscopy. however, there are many gaps in our knowledge on the taxonomy of this important pathogen. In deuteromycete taxonomy, recently, emphasis is laid particularly on the mode of conidiogenesis. Development is reported to be phialidic in Phoma spp. but annellidic in Ascochyta spp. (4). Therefore, keeping this developmental aspect in mind, studies were performed under transmission (TEM) and scanning (SEM) electron microscopes to reveal the mode of conidiogenesis in the fungus A. rabiei. MATERIALS AND METHODS Medium The culture of A. rabiei was raised on potato dextrose-chickpea seed-agar medium, PDCA (peeled potatoes, 200 g; dextrose, 20 g; agar-agar, 20 g; water to make 1 l; split chickpea seeds with testa intact, two per test tube), at 20+1~

We report our investigations on the embryonic development of Gryllus assimilis, with particular attention to the head. Significant findings revealed with scanning electron microscopy (SEM) images include: (1) the pre-antennal lobes represent the anterior-most segment that does not bear any appendages; (2) each of the lobes consists of central and marginal regions; (3) the central region thereof develops into the protocerebrum and the optic lobes, whereas the marginal region thereof becomes the anterior portion of the head capsule; (4) the initial position of the antennal segment is posterior to the mouth region; (5) appendage anlagen are transitorily present in the intercalary segment, and they later vanish together with the segment itself; (6) a bulged sternum appears to develop from the ventral surface of the mandibular, maxillary and labial segments. Embryonic features are then compared across the Insecta and further extended to the embryos of a spider (Araneae, Chelicerata). Striking similarities shared by the anterior-most region of the insect and spider embryos lead the authors to conclude that such comparison should be further undertaken to cover the entire Euarthropoda. This will help us to understand the embryology and evolution of the arthropod head.

In the past several years, there has been a trend in the sunscreen/ cosmetics industry to replace micron-sized titanium dioxide (TiO 2) particles with nanoscale materials. The increased use of nanoscale TiO 2 has resulted in questions about these and other nanoproducts. This study examines the effects of using nanoscale TiO 2 on ultraviolet (UV) attenuation in simple to complex sunscreen formulations. UV light attenuation, product stability, and potential damage to the skin barrier were examined with both nanoscale and microscale TiO 2 particles. Results indicate that none of the formulations decreased the barrier function of the skin and the best UV attenuation occurs when the TiO 2 particles are stabilized with a coating and evenly distributed such as with non-agglomerated coated nanoscale materials. This indicates that nanoscale TiO 2 may have better efficacy while lacking toxicity. Ré sumé Au cours des dernières années, nous avons constaté une tendance dans l'industrie solaire/cosmétique pour le remplacement des particules micron-taille de dioxyde de titane (TiO 2) avec des matériaux de nano-échelle. L'utilisation accrue des particules de TiO 2 l'échelle du nanométre a engendré des questions sur tous les produits contenant des matériaux nano-échelle. Cette étude examine les effets de l'utilisation de particule de TiO 2 a l'échelle du nanomètre sur l'atténuation des rayons UV dans les formulations de crème solaire simple et complexe. Nous avons étudié l'atténuation de la luminosité ultraviolet (UV), la stabilité du produit et les effets sur la fonction barrière de la peau, avec les particules de TiO 2 nano-échelle et micro-échelle. Les résultats indiquent que les particules a l'échelle du nanométre, enduits et non-aggloméré, fournissent une excellente atténuation UV, sans diminuer la fonction barrière de la peau. Ceci suggére que les particules de TiO 2 a l'échelle du nanométre ont une meilleure efficacité, sans poser des inquiétudes en ce qui concerne leur securité.

Phosphate-based glasses have been examined in many studies as a potential biomaterial for bone repair because of its degradation properties, which can be controlled and allow the release of various elements to promote osteogenic tissue growth. However most of these experiments studied either tertiary or quaternary glass systems. This study investigated a qinternary system that included titanium dioxide for degradation rate control and zinc that is considered to have a role in bone formation. Zinc and titanium phosphate glass discs of different compositions were melt synthesized and samples of each composition was tested for different physical, chemical and biological characteristics via density measurement, X-ray diffraction, differential thermal analysis, mass loss, ion release, scanning electron microscopy, biocompatibility studies via live/dead assays at three time points (day 1, 4, and 7). The results showed that the glass was amorphous and that the all thermal variables decreas...

Uroplakins, cytokeratins and the apical plasma membrane were studied in the epithelia of mouse urinary tract. In the simple epithelium covering the inner medulla of the renal pelvis, no uroplakins or cytokeratin 20 were detected and cells had microvilli on their apical surface. The epithelium covering the inner band of the outer medulla became pseudostratified, with the upper layer consisting of large cells with stalks connecting them to the basal lamina. Uroplakins and cytokeratin 20 were not expressed in these cells. However, some superficial cells appeared without connections to the basal lamina; these cells expressed uroplakins Ia, Ib, II and III and cytokeratin 20, they contained sparse small uroplakin-positive cytoplasmic vesicles and their apical surface showed both microvilli and ridges. Cytokeratin 20 was seen as dots in the cytoplasm. This epithelium therefore showed partial urothelial differentiation. The epithelium covering the outer band of the outer medulla gradually changed from a twolayered to a three-layered urothelium with typical umbrella cells that contained all four uroplakins. Cytokeratin 20 was organized into a complex network. The epithelium possessed an asymmetric unit membrane at the apical cell surface and fusiform vesicles. Umbrella cells were also observed in the ureter and urinary bladder. In males and females, the urothelium ended in the bladder neck and was continued by a non-keratinized stratified epithelium in the urethra in which no urothelial cell differentiation markers were detected. We thus show here the expression, distribution and organization of specific proteins associated with the various cell types in the urinary tract epithelium.

Acid mine drainage (AMD) – characterized by high acidity and elevated sulfate and metal concentrations – represents a big environmental concern. Biological sulfate reduction has become an alternative to the classical physicochemical methods. In this study, domestic wastewater (DW) was tested as a cost-effective carbon-source for the remediation of AMD. Sediments from Tinto River, an extreme acidic environment with an elevated concentration of metals, were used as inoculum. Three anaerobic bioreactors with different microbial supports were fed with a 1:10 (v:v) mixture of synthetic AMD:DW. Around 50% of the organic matter present in the DW co-precipitated with the metals from the AMD previous to feeding the reactor. Therefore, the reactors had to be supplemented with an extra carbon-source (acetate) to achieve higher S elimination. Elevated removal efficiencies of chemical oxygen demand (COD) (&gt;88%), sulfate (&gt;75%), Fe (&gt;85%) and other dissolved metals (&gt;99% except for Mn...

Joining of dissimilar materials is of increasing interest for a wide range of industrial applications. The automotive industry, in particular, views dissimilar materials joining as a gateway for the implementation of lightweight materials. Specifically, the introduction of aluminum alloy parts into a steel car body requires the development of reliable, efficient and economic joining processes. Since aluminum and steel demonstrate

In order to overcome the high price, weight and volume of non-porous graphite bipolar plates, metallic bipolar plates are being investigated as a substitute material. However, metallic materials can corrode under proton exchange membrane fuel cell (PEMFC) working conditions, leading to a degradation in the performance of the membrane. Previous work had shown that a polypyrrole coating on SS316L can significantly increase the corrosion resistance of the base material. In this study, a Taguchi design of experiment method was used to optimize the process parameters for the polypyrrole coating so as to produce the maximum corrosion resistance. Potentiodynamic and potentiostatic tests were used to determine the corrosion resistance of the polypyrrole-coated SS316L. Scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) was used to characterize the coating thickness and coating appearance. Inductively coupled plasma optical emission spectroscopy (ICP-OES) was used to determine the metal ion concentration in the solution after corrosion. The interfacial contact resistance of SS316L with carbon paper was measured both before and after coating with polypyrrole.

Background: The effectiveness of aerosol therapy is significantly reduced by the mucus layer covering the airways of the tracheobronchial tree. According to the present concept, drug particles are delivered to the lung together with the functional carrier particle that facilitates both the drug transport into the lungs and the penetration of deposited particles through the mucus. The approach of manufacturing multicomponent powders with mucoactive compounds and anti-asthmatic medicines (DSCG) bound together in a single particle is additionally considered. Methods: Powders were produced with the spray-drying technique from aqueous precursor solutions containing pure low molecular weight dextran, pure mannitol and dextran/mannitol-N-acetyl cysteine (NAC) mixtures (4:1 and 1:1). NAC has been selected for this purpose as a compound, which is known to be mucolytic. Dextran and mannitol are potentially applicable in the field of inhalation drug delivery. They have been used as stabilizers of functional carrier particles. Powders were characterized for their yield and physicochemical properties including: morphology (SEM), moisture content and thermal properties (DSC). Aerosol performance was determined with NGI impactor after standardized aerosolization of the produced powders in a commercial DPI. Results: Particle size distributions of dextran-NAC powders were characterized by high fine particle fraction (45-62%), which assures good particle deposition in the lower airways. The thermodynamic properties of the powders based on the temperature of the glass transition T g (50-63 • C) suggest the required stability during storage at moderate humidity. Conclusions: Preliminary examination of the required properties of these particles confirms their potential as functional carriers for pulmonary drug delivery.

A new approach for studying the effect of temperature on anodic oxide growth on aluminium is presented in this paper. Using an in-house developed electrode holder, anodizing is performed under conditions of applied and controlled electrode temperature. The influence of temperature on the process is evaluated by experiments in a broad temperature range for both the electrode and the electrolyte temperature. The electrochemical behaviour of the aluminium electrodes is demonstrated to be more susceptible to variations of the electrode temperature than to variations of the electrolyte temperature. Concerning the morphology of the anodic film it is shown that by cooling the electrode a normal oxide layer could be grown at high electrolyte temperatures, whereas anodizing in a cool electrolyte at high electrode temperature results in a collapsed porous structure at the oxide surface. Furthermore, the electrode temperature affects the formation ratio of the oxide to a larger extent than the electrolyte temperature, indicating its important influence even on the level of the ionic conductivity during anodic oxide growth. All observations indicate that merely considering the electrolyte temperature upon studying the influence of temperature on the process is not sufficient; the electrode temperature is much more determining.

One of the current challenges for application of PEM fuel cell is to find corrosion resistant, electrically conductive, light weight, cost competitive bipolar plate material. Low temperature carburization (LTC) of stainless steels is a novel, patented process by Swagelok Company. This paper addresses the corrosion resistance characteristics of LTC SS 316 for polymer electrolyte membrane fuel cell (PEMFC) bipolar plate applications. Corrosion properties of this material were studied using potentiodynamic and potentiostatic tests in simulated (1 M H 2 SO 4 + 2 ppm HF, 0.5 M H 2 SO 4 , pH: 4.0, and 5% HCl + 5% Na 2 SO 4) PEMFC conditions. LTC SS 316 showed excellent corrosion resistance in these conditions compared to SS 316. The mechanism of anodic dissolution and general corrosion of LTC SS 316 was observed to be similar to SS 316 however the extent of LTC SS 316 corrosion was less. LTC SS 316 showed corrosion currents well below 16 A cm −2 in anodic and cathodic atmospheres under potentiostatic conditions. The potentiostatic current rapidly falls to ∼4.0 and ∼1.5 A cm −2 under anodic and cathodic conditions, respectively. LTC SS 316 was observed to form a thinner oxide layer as compared to SS 316 after 24 h of potentiostatic testing. Moreover LTC SS 316 lowered the interfacial contact resistance by approximately 24% as compared to SS 316 after corrosion testing. Hence this study clearly states the performance advantage of using LTC SS 316 as bipolar plate material as compared to conventional materials.

Embolism is responsible for half of cerebral infarctions, yet few animal models were developed due to the unpredictability of the embolus-induced infarcts. We manufactured artificial embolic particles by blending chitin and poly(D,L-Lactide-co-glycolide) (chitin/PLGA) for their good biocompatibility and rapid hydration expansion property. We subdivided the chitin/PLGA microparticles into 10 size groups (from 38e45 mm to 255e350 mm) and injected them through the external carotid artery toward the bifurcation of the common carotid artery in the rat. Reduced blood flow of the ipsilateral hemisphere was evident immediately after the injection of particles. The spherical appearance of the particle was critical in occluding the cerebral vessels. Particle 212e250mm produced the greatest diffuse infarction in the ipsilateral hemisphere, including the cortex, hippocampus, basal ganglion, thalamus, midbrain and cerebellum. Particle 75-90mm induced single or sparse isolated infarcts mainly located in the subcortical region, resembling lacunar stroke observed in humans. Particle 38e45mm frequently crossed to the contralateral hemisphere and induced diffuse infarctions in both hemispheres. The cortex infarct volumes were positively correlated to neurologic score and seizure incidence. In conclusion, we have established embolic stroke animal models, including a novel model that mainly expresses lacunar infarction, by intravenous injection of chitin/PLGA microparticles.

Epiphytic lichens are efficient air pollution bio monitors as they obtain nutrients, water and pollutants from the atmosphere. The aim of this study was at analyzing the surface of hyphae and the surface of the lichens Evernia prunastri (unwashed and washed in distilled water). Mass percentage of 26 selected elements: C, O, Na, Mg, Al, Si, P, S, Cl, K, Ca, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Cd, Sn, Sb, Hg, Pb and Bi was determined by scanning electron microscopy (SEM) and energy‐dispersive X‐ray spectroscopy (EDS). Mass percentage of: Na, Mg, V, Cr, Mn, Co, Ni, Zn, As, Cd, Sn, Sb, Hg, Pb was below the limit of detection of the applied method. The mass percentage of all other determined elements on the hyphae and surface of lichen was higher in unwashed samples, except for C, O, P, Fe, Cl, Ca and Cu. The elemental analysis of the unwashed lichen surface showed the prevalence of: O, C, Si, Cu and
Bi. Results obtained in the unwashed and washed lichen samples showed that the cleaning with water can be used in order to eliminate adhering materials. Indeed, most of elements of interest for the environmental contamination accumulated by the lichens were not
removed. SEM images showed particles that are flat, with irregular shape and edges, generally smooth and rounded indicating that the particles deposited were dry aerosol particles.

We aimed to compare the apical sealing ability of two experimental retrograde root-filling cements and mineral trioxide aggregate using a fluid filtration method. X-ray diffraction (XRD) and X-ray fluorescence spectrometry (XRF) were used to evaluate structural and qualitative characteristics. Thirty single-rooted extracted teeth were treated, root-end prepared, and obturated using MTA and two experimental cements. Fluid filtration was measured during a 5-minute period after 4, 24, and 48 hours and 1, 2, and 12 weeks. The results were statistically compared by using a two-way analysis of variance (p Ͻ 0.05). The marginal adaptation was evaluated by using a SEM replica technique. XRD analyses showed similar patterns. XRF showed lower amounts of SiO 2 and FeO 3 in the experimental cements. All cements showed a reduced fluid flow rate over time. No significant differences were found between the cements. The SEM replica indicated a good marginal adaptation to dentinal walls. Both experimental cements showed suitable properties as retrograde rootfilling materials. (J Endod 2007;33:742-745)

Background: 1E10 monoclonal antibody is a murine anti-idiotypic antibody that mimics N-glycolyl-GM3 gangliosides. This antibody has been tested as an anti-idiotypic cancer vaccine, adjuvated in Al(OH) 3 , in several clinical trials for melanoma, breast, and lung cancer. During early clinical development this mAb was obtained in vivo from mice ascites fluid. Currently, the production process of 1E10 is being transferred from the in vivo to a bioreactor-based method.

The exoskeleton of the lobster Homarus americanus is a multiphase biological composite material which consists of an organic matrix (crystalline α-chitin fibers and various types of non-crystalline proteins) and minerals (mainly calcite). In this study we discuss experimental data about the mesoscopic structure and the crystallographic texture (orientation distribution) of the α-chitin–protein fiber network in this material. The synchrotron measurements reveal very strong crystallographic textures of the α-chitin. According to these data, a large fraction of the α-chitin lattice cells is arranged with their longest axis parallel to the normal of the surface of the exoskeleton. Additionally, a smaller fraction of the α-chitin cells is oriented with their longest axis perpendicular to the cuticle surface. These structural investigations reveal the pronounced role of crystallographic orientation distributions in mineralized biological composite materials which may be of relevance for an improved understanding of biological and bio-inspired nano-composites.

Epidermal changes caused by a chytridiomycete fungus (Chytridiomycota; Chytridiales) were found in sick and dead adult anurans collected from montane rain forests in Queensland (Australia) and Panama during mass mortality events associated with significant population declines. We also have found this new disease associated with morbidity and mortality in wild and captive anurans from additional locations in Australia and Central America. This is the first report of parasitism of a vertebrate by a member of the phylum Chytridiomycota. Experimental data support the conclusion that cutaneous chytridiomycosis is a fatal disease of anurans, and we hypothesize that it is the proximate cause of these recent amphibian declines.