Shotshells contain a primer in the metal head, propellant, a
wad or sabot and shot or a projectile.
But the defence witness, who has almost three decades of experience, told the jury that in his opinion it was not possible to say beyond reasonable doubt the
wad examined was discharged from the shotgun in question.
Erik Carlson, Federal's product engineering manager, says the new
wad has an additional stiff vane running down each segment of the skirt that ensures deployment regardless of whether shot through a ported or non-ported tube.
The use of
wads in pistol ammo is unwise nonetheless.
Thanks for your reply however, its still not clear what
wads are the best and what is unsafe?
The current is swift, leading less maneuverable craft directly into the root
wads, deputies cautioned.
We are still continuing our research operationally, he said adding that currently their focus is on
WADS.
The
WADS, a dreaded and elusive group, has long been under surveillance by the Philippine Drug Enforcement Agency (PDEA), National Bureau of Investigation (NBI) and other concerned law enforcement agencies.
The powder charge is placed in the cylinder chamber, a
wad is placed over the powder if desired, and an oversized round ball is seated using the built in rammer under the sixgun barrel.
Before we rolled out the additional 130
Wads awarded to us as part of the 2012 LSTA grant, we experimented with Apple Configurator and knew that despite its many flaws, we would need a way to track app licensing and sync multiple devices with the addition of this many
Wads to our library.
When contacted, a well-placed official at SBP requesting on anonymity told the bank gives 5
wads of Rs 10 fresh notes, and one
wad of Rs 20, 50 and 100 each to an individual on showing Computerized National Identity Card No (CNIC) which amounts to Rs 22,000 in total.
These
wads can weigh between 2.5 & 4 grams, which equates to an annual 6,000 tonnes of non-biodegradable materials within the environment, which creates a health risk for humans and for the planet.
The 1960s brought the idea of making the entire
wad column a single unit by using additional material to join the plastic over-powder and over-shot
wads.