Badr-B
Lua error in package.lua at line 80: module 'strict' not found.
Badr-B atop a Zenit-2 rocket ahead of laucnh
|
|
Mission type | Earth Observation Satellite Earth science |
---|---|
Operator | SUPARCO |
COSPAR ID | 2001-056C |
SATCAT № | 27003 |
Website | www |
Mission duration | 2 years |
Spacecraft properties | |
Manufacturer | Space Innovations Limited Rutherford Laboratory Instrumentation Laboratory DESTO |
Launch mass | 68.5 kilograms (151 lb) |
Start of mission | |
Launch date | December 10, 2001, 17:18:57 | UTC
Rocket | Zenit-2 |
Launch site | Baikonur 45/1 |
Orbital parameters | |
Reference system | Geocentric |
Regime | Sun-synchronous |
Eccentricity | 0.0018975332 |
Perigee | 986.0 kilometres (612.7 mi) |
Apogee | 1,014.0 kilometres (630.1 mi) |
Inclination | 99.7 degrees |
Period | 105.0 minutes |
The Badr-B (Urdu: بدر-۲; also known as Badr-II, meaning Full Moon-2) is the second spacecraft and the first earth observation satellite launched into Earth orbit on December 10, 2001 at 0915 hrs by the SUPARCO — Pakistan's national space agency.[1] Badr-B is a microsatellite, with a mass of ~70 kg, and contained the supercomputerized system to conduct the studies on the gravity gradient. Badr-B is a research satellite to explore the upper atmosphere and the near space, and carried a large array of instruments for geophysical research.[1]
The Badr-B payload was equipped with several CCD cameras, compact dosimeter, a telemetry system, charge detector and a temperature control unit.[1] It is intended to complete and update the Islamabad Mission Control Center (IMCC), and to test the remote sensing CCD instruments.[1]
Contents
Launch history
The Badr-B project was launched by Suparco in 1992, following the success of the Badr-I in 1990.[2] The program was funded by Science Ministry and the construction of the program was completed in Instrumentation Laboratories in Karachi. The United Kingdom's Space Innovation Limited, plc (SIL) also joined this program in 1993 as it had constructed the instrumentation of this satellite.[3] The Badr-B was slightly bigger than the Badr-I as compare to weight and mass.[clarification needed] Most of the equipments were developed at the DESTO and the spacecraft designing took place in Instrumentation Laboratories in Karachi. The Space Innovation Limited took the contribution in providing the technical assistance required for assembling the Badr-B.[3] A Mission control center was established at the Islamabad where several supercomputers and its systems were installed by Space Innovation Limited. In 1995, a computer system and the system software was designed and installed by Pakistan Software Export Systems (PSES) while COMSATS helped installing the large computer screen at the Islamabad mission control center.[4] Overall, the work on Badr-B was completed in 1996 by Suparco and it was originally planned to launch from Tilla Launch Complex but it was objected as the country had no launch facility at that time.[4] The CCD cameras were developed by the Rutherford Appleton Laboratory (RAL) who took the interest in the development of the Badr-B in 1995.[3]
Badr-B was developed in 1996 but the delay of Russian space-rocket put the satellite on hold for more than 4 years.[5] Founding difficulty to launch the satellite, dr. Abdul Qadeer Khan unsuccessfully attempted to launch the satellite from he Sonmiani Launch Complex which was denied by the government at that time.[6] In 2001, the Air Force Strategic Command flew the Badr-B to Kazakhstan where it was finally launched from Baikonur Cosmodrome on December 10, 2001 abroad a Ukrainian Zenit-2 rocket.[3]
Design
The economical cost of the Badr-B is not publicly known but it is estimated to be more costly than the first satellite, Badr-I.[5] For its design, the Badar-B is far more complex and sophisticated than the first satellite.[4] The external body of the Badr-B is made of Al-13 with a total mass of 70 kg.[4] Badr-B was launched in a sun-synchronous orbit of 1050 km with an earth orbital period of 106 minutes.[4] Badr-B is a cube with side dimensions of 510mm x 510mm x 465mm and a gravity gradient vector system to stabilize the satellite to its mission control center.[4] A typical orbital and terminal pass over to country's space orbit entry would last between 10 and 15 minute.[4]
Badr-B internal structure was made of space qualified aluminum T-6 alloy.[7] The gallium arsenide (GaAs) solar arrays were used to provide and generate the electronic power during the sunlit periods.[7] The nickel cadmium (NiCd) batteries were also installed during the eclipse periods.[7] Earth pointing single axis stabilization was achieved by the use of a 6m gravity gradient boom with a trip mass of 4 kg.[7]
Launch plans and site selections
The Suparco sat its deadline to launch the satellite in 1994 but, due to satellite was being upgrade it as time passes, Suparco lost the space orbital entry slot.[5] Suparco then planned to Badr-B in 1995 or as early of 1996 but did not materialize the plan.[5] By the 1996, Badr-B was completed and was ready to launch but due to upcoming elections in 1997, the plan was put on hold.[5] Since Suparco has no launch complex, it began to hold talks with China and Russia at the lowest rate.[5] In 1998, following the restrictions applied on Pakistan after it had conduct atomic tests (See Chagai-I and Chagai-II), Suparco was unable to launch the satellite, therefore putting the satellite in the storage.[4]
Delaying of the satellite's launch program further frustrated the scientific community, therefore, Government of Pakistan launched the work on Shaheen-III and Ghauri-III expendable rockets in 1998.[4] In 2001, senior scientist Dr. Abdul Qadeer Khan approached the Pakistan Government to receive permission to launch the satellite from either Tilla Launch Complex or Sonmiani Launch Complex.[6] However, then-CMLA General Pervez Musharraf denied the request of Khan.[6]
In 2001, the Pakistan Academy of Sciences held the physics and mathematics conference on astrophysics in Pakistan where scientists from all over the country were invited to come to Nathiagali.[8] In an media interview given at Nathiagali, dr. Abdul Qadeer Khan maintained that, "Pakistan has very robust nuclear I.R.B.M. system which can launch geostationary orbiting satellites. All Pakistan has to do is to erase Delhi or Calcutta from the target and point it towards the sky. Instead of Hydrogen bombs and Atomic bombs, the missiles can easily carry a payload of a 80kg satellite into the sky...".[6] Astrophysicist dr. Shahid Kureshi also argued that [IRBM] missiles have very robust and effective electronics and computer system, the [SLV]s used the similar technology.[8] Taking part in this discussion, Nuclear physicist dr. Pervez Hoodbhoy believed that "If we [Pakistan] can launch a missile up to a range of 1,500 km, why not build an [SLV] that can launch low-atmosphere satellites?".[8]
Dr. Abdul Majid, an astrophysicist, countered the pressure in a media interview in 1999 given to Dawn Newspapers, and in his own words, dr. Majid summed up that, "with Meteor-3M (a Soviet satellite), other four satellites one each from [Pakistan], Malaysia, Morocco and the United States are to be mounted on the bigger Russian rocket. It was only the Pakistan's Badr-B satellite which had met the deadline set by the Russians. The deadline was in April. All the other satellites failed to meet the deadline".[4]
Launch and mission
After receiving criticism from the scientific society, the Suparco succeeded in a talks held with Russian Federal Space Agency on a possible low rates.[9] The PAF's Air Force Strategic Command flew the satellite via C-130 Hercules to Kazakhstan. The Badr-B was taken to Baikonur Cosmodrome along with Russian satellites which were also stored for the final assembly.[10] The Badr-B, along with Soviet built Meteor-3M, was installed at the Zenit-2 expandable rocket.[3] A high level delegation of Suparco headed by Major-General Raza Hussain arrived at the Baikonour Cosmodrome to witness the launch.[9] At 17:18UTC, the Badr-B was launched along with Meteor-3M with an ascending node time of about 9:15AM.[3][10]
Experiments
The Badr-B conduct four major ob-board experiments, including taking the snap shots of Earth images, and data storage and forwarding to its mission control center.[7] The Badr-B also used the radiation dosimeter to measure the exposure of Sun's ionizing radiation and, also used to study the electromagnetic field of Earth.[7] The Badr-B also conduct studies on charge battery when it is exposed to Solar flare and forwarded Solar winds.[7] Expected results were sent to its mission control center in Islamabad.[7]
Achievements
Overall, the Badr-B was an ambitious project that was intended to learn and developed the low-cost EOS satellites, and to build the infrastructure for larger satellites.[7] The Badr-B also gave the scientists to understand the usage of technology for earth imaging by using the CCD sensors; it also gave provided the scientists to enhance their studies conducted on how the solar flare effected the environment of Earth.[7] The Badr-B stimulated the research on astrophysics and astroparticle physics that encourage the scientific community to continue their research on peaceful uses of space.[7]
However, its achievements was undermined after Suparco had lost the orbital slot in four consecutives years[8] The onward criticism also undermined Suparco's effort who built this satellite, and due to its long wait, the negative reception was perceived by scientific community.[8] Careful analysis of launch facilities and capabilities doubted if the space program is on right track.[8] With all criticism, in 2002, Suparco began to conduct further studies and launched the more ambitious and complex project which formed the basis derivatives of Press system, later this program was integrated with Space programme 2040.[11] Under the Space programme 2040, the Badr-B will be replaced with more complex and technologically advanced high-resolution satellite PRSS-O1, which is expected to be launched in 2017.[11]
References
- ↑ 1.0 1.1 1.2 1.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 3.0 3.1 3.2 3.3 3.4 3.5 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 5.0 5.1 5.2 5.3 5.4 5.5 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 6.0 6.1 6.2 6.3 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 7.00 7.01 7.02 7.03 7.04 7.05 7.06 7.07 7.08 7.09 7.10 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 8.0 8.1 8.2 8.3 8.4 8.5 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 9.0 9.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 10.0 10.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 11.0 11.1 Lua error in package.lua at line 80: module 'strict' not found.
NASA links
- Lua error in package.lua at line 80: module 'strict' not found.
- Lua error in package.lua at line 80: module 'strict' not found.
- Articles missing orbit epochs
- Articles containing Urdu-language text
- Wikipedia articles needing clarification from July 2012
- Use Pakistani English from January 2014
- All Wikipedia articles written in Pakistani English
- Earth observation satellites
- Artificial satellites formerly orbiting Earth
- Badr satellites
- Spacecraft launched in 2001
- Space programme of Pakistan
- History of science and technology in Pakistan