Commercial fish feed
Manufactured feeds are an important part of modern commercial aquaculture, providing the balanced nutrition needed by farmed fish. The feeds, in the form of granules or pellets, provide the nutrition in a stable and concentrated form, enabling the fish to feed efficiently and grow to their full potential.
Many of the fish farmed more intensively around the world today are carnivorous, for example Atlantic salmon, trout, sea bass, and turbot. In the development of modern aquaculture, starting in the 1970s, fishmeal and fish oil were key components of the feeds for these species. They are combined with other ingredients such as vegetable proteins, cereal grains, vitamins and minerals and formed into feed pellets. Wheat, for example, is widely used as it helps to bind the ingredients in the pellets.
Other forms of fish feed being used include feeds made entirely with vegetable materials for species such as carp, moist feeds preferred by some species (easier to make but more difficult to store), and trash fish — that is fish caught and fed directly to larger species being raised in aquaculture pens.
Contents
Hatchery feeds
Specialised feeds are produced for fish hatcheries. In species such as salmon and trout, the newly hatched fry first feed from their yolk sacs and then can be fed with starter feeds. Marine species such as sea bass, sea bream, flounders and turbot consume the nutrition in their yolk sacs during the first few days post hatching and then are fed for several weeks on live prey,[1] in the form of rotifers and brine shrimp (Artemia). Special feeds can be used to enrich the nutritional value of the prey. Rotifers are usually bred in the hatchery while brine shrimp are generally collected from the wild, e.g. salt lakes. Manufactured feed alternatives to brine shrimp are becoming available, offering more consistent nutrition and improved sustainability as demand increases with the growth of aquaculture.
Development of manufactured feeds
Until the end of World War II most fish hatcheries relied on raw meat (horse meat in particular) as a dietary staple for trout. In the early 1950s, John E. (Red) Hanson, while working for the New Mexico Game and Fish Department, began experimenting with dietary routine and dry pellet formulations. The first fish feed pellets were introduced to hatchery trout at the Red River Hatchery near Taos. The pellets resulted in improved conversion rates of food intake to fish production, and lead in turn to the wider adoption of fish pellets in hatcheries.[2]
The development of dry pelleted fish feeds to date has two themes. One theme is on improving digestibility and refining the balance of nutrients to match the needs of the different species of fish more precisely at different periods of development. The other theme is to improve the sustainability of the ingredients used. This is being achieved mainly by identifying additional sustainable sources of ingredients, in particular to reduce the need for fishmeal and fish oil. Improving the efficiency of feeding also contributes to sustainability.
Sustainability
Traditionally two of the most important ingredients have been fishmeal and fish oil. These come mainly from the processing of fish from the wild catch, usually pelagic species that are generally not suited to processing for human consumption. Fish sold for human consumption attract a higher price than those used to make fishmeal. The fishmeal fisheries are often referred to as reduction fisheries. The world’s largest reduction fishery is in the Pacific, off the coast of Peru and Chile and is regulated by the governments of those countries. The North Atlantic is another important source of fish for fishmeal and fish oil. Many major suppliers belong to the International Fishmeal and Fish Oil Organisation.[3]
Fishmeal is a brown, flour-like material made by specialist producers that cook, press, dry and grind the fish. The fish oil is effectively a by-product of this process that proves to be a rich source of energy and fatty acids for fish, including the important long-chain omega-3 fatty acids EPA and DHA now linked to the health benefits associated with eating oily fish such as salmon and mackerel. Fish in general also are good sources of many vitamins and minerals and are often recommended as part of a healthy diet by governmental food agencies.[4][5][6][7]
Because the catches of wild fish must be managed at sustainable levels to ensure the stocks continue to be viable, the available supply of fishmeal and fish oil from these resources will not increase.
The global demand for fish from consumers around the world is increasing. Reasons include the growing population, rising average incomes and greater awareness of fish as part of a healthy diet. The yield from the wild catch cannot be increased sustainably, therefore, in the opinion of observers such as the Food and Agriculture Organization (FAO) of the United Nations, aquaculture must fill the gap. Currently the supply of fish from aquaculture approximately matches that from the wild catch, according to FAO figures.
The current drive in research and development is enabling this to happen by supplementing fishmeal and fish oil with vegetable proteins and oils, while ensuring the fish continue to provide the important health benefits for consumers.[8] Other potential raw material resources are also being explored. For example, the U.S. biotechnology company BioTork is piloting the use of raw materials such as unmarketable papaya and by-products from biodiesel production to produce fish feed components,[9] as well as feeding agricultural waste to algae and fungi that manufacture some of the proteins and omega-3 oils needed for fish food.[10]
Modern fish feed
Modern fish feeds are made by grinding and mixing together ingredients such as fishmeal, vegetable proteins and binding agents such as wheat. Water is added and the resulting paste is extruded through holes in a metal plate. The diameter of the holes sets the diameter of the pellets, which can range from less than a millimetre to over a centimetre. As the feed is extruded it is cut to form pellets of the required length. The pellets are dried and oils are added. Adjusting parameters such as temperature and pressure enables the manufacturers to make pellets that suit different fish farming methods, for example feeds that float or sink slowly and feeds suited to recirculation systems. The dry feed pellets are stable for relatively long periods, for convenient storage and distribution. Feeds are delivered in bulk, in large bags—usually one tonne, or in 25 kilogram bags. Smaller quantities of specialist feeds are supplied for use in fish hatcheries. The three major manufacturers of fish feeds for aquaculture are Biomar,[11] EWOS[12] and Skretting.
See also
- Aquaculture of brine shrimp
- Aquarium fish feed
- John Halver – the father of fish nutrition
- Shrimp mix
- Skretting Aquaculture Research Centre
Notes
- ↑ www.fao.org
- ↑ Sigler JW and Sigler WF (1986) "History of fish hatchery development in the Great Basin states of Utah and Nevada" The Great Basin Naturalist, 46 (4): 583–594.
- ↑ IFFO
- ↑ Washington State Department of Health
- ↑ Food Standards Agency, UK
- ↑ American Hearts Association
- ↑ Agence nationale de sécurité sanitaire
- ↑ [1]
- ↑ http://www.gainesville.com/article/20140821/articles/140829906
- ↑ http://www.ars.usda.gov/research/projects/projects.htm?ACCN_NO=422341&fy=2013
- ↑ Biomar Group
- ↑ EWOS Group
External links
- Federation of European Aquaculture Producers Aquamedia site
- www.aquafeed.com.
|
||||||||||||||||||
|
||||||||||||||||||
| Fisheries |
 |
|
|---|---|---|
| Fishing | ||
| Industry | ||
| Recreation | ||
| Techniques | ||
| Tackle | ||
| Locations | ||
