Grumman F2F
| Grumman F2F | |
|---|---|
 |
|
| A F2F-1 of fighter squadron VF-2B, USS Lexington (CV-2) | |
| Role | Naval fighter |
| Manufacturer | Grumman |
| Designer | Leroy Grumman |
| First flight | 18 October 1933 [1] |
| Introduction | 1935 |
| Retired | 1940 |
| Primary user | United States Navy |
| Produced | 1934-1935 |
| Number built | 55 |
| Unit cost |
$12,000 (as of 1935)[2]
|
| Developed from | Grumman FF |
| Variants | Grumman F3F |
The Grumman F2F was a single-engine, biplane fighter aircraft with retractable undercarriage, serving as the standard fighter for the United States Navy between 1936 and 1940. It was designed for both carrier- and land-based operations.
Contents
Design and development
Grumman's success with the two-seat FF-1, which was significantly faster than even the single-seat fighters of its time, resulted in a contract for the single-seat XF2F-1.[3] Armed with two .30 caliber (7.62 mm) machine guns above the cowl, the new design also incorporated watertight compartments to reduce weight and improve survivability in the event of a water landing.[2] The prototype first flew on 18 October 1933, equipped with the experimental 625 hp (466 kW) XR-1534-44 Twin Wasp Junior radial engine, and reached a top speed of 229 mph (369 km/h) at 8,400 ft (2,600 m) - 22 mph (35 km/h) faster than the FF-1 at the same altitude.[2] Maneuverability also proved superior to the earlier two-seat aircraft.[3]
Operational history
The Navy ordered 54 F2F-1 fighters on 17 May 1934, with the first aircraft delivered 19 January 1935. An additional aircraft was ordered to replace one which crashed on 16 March 1935, bringing the total to 55, with the final F2F-1 delivered on 2 August 1935. The F2F-1 had a relatively long service life for the time, serving in front-line squadrons from 1935 to late 1939, when squadrons began to receive the F3F-3 as a replacement. By September 1940, the F2F had been completely replaced in fighter squadrons and was relegated to training and utility duties.[2]
Variants
- XF2F-1
- United States Navy designation for the Grumman G.6 prototype with a 625 hp (466 kW) XR-1534-44 Twin Wasp Junior radial engine, one built.
- F2F-1
- Production variant with a 700 hp (522 kW) R-1535-72 Twin Wasp Junior radial engine, 55 built.
Operators
Specifications (Grumman F2F-1)
Data from United States Navy Aircraft since 1911 [4]
General characteristics
- Crew: One
- Length: 21 ft 5 in (6.53 m)
- Wingspan: 28 ft 6 in (8.69 m)
- Height: 9 ft 1 in (2.77 m)
- Wing area: 230 ft² (21.4 m²)
- Empty weight: 2,691 lb (1,221 kg)
- Max. takeoff weight: 3,847 lb (1,745 kg)
- Powerplant: 1 × Pratt & Whitney R-1535-72 Twin Wasp Junior radial engine, 700 hp (522 kW)
Performance
- Maximum speed: 231 mph (201 knots, 372 km/h)
- Range: 985 mi (857 nmi, 1,585 km)
- Service ceiling: 27,100 ft (8,260 m)
- Rate of climb: 2,050 ft/min (10.4 m/s)
Armament
- Guns: 2× .30-in machine guns
See also
- Related development
- Related lists
References
Citations
Bibliography
- Cacutt, Len, ed. “Grumman Single-Seat Biplane Fighters.” Great Aircraft of the World. London: Marshall Cavendish, 1989. ISBN 1-85435-250-4.
- Graff, Cory. F6F Hellcat at War. New York: Zenith Imprint, 2009. ISBN 978-0-76033-306-8.
- Swanborough, Gordon and Peter M. Bowers. United States Navy Aircraft since 1911. London: Putnam, Second edition, 1976. ISBN 0-370-10054-9.
External links
Media related to Lua error in package.lua at line 80: module 'strict' not found. at Wikimedia Commons
