HBG (time signal)

HBG time code transmitter
HBG transmitter in Prangins, Switzerland (now demolished)
Location	Prangins, Switzerland
Coordinates
Operator	Swiss Federal Office of Metrology (METAS)
Frequency	75 kHz
Power	20 kW
Began operation	1966
Ceased operation	2012-01-01 07:00:13.2 UTC
Website	http://www.metas.ch/en/labors/official-time/hbg/

HBG was a low frequency time signal transmitter for the Swiss time reference system. It transmitted on 75 kHz with 20 kW power, and was located in Prangins, Switzerland.

Due to the cost of urgently needed renovation for the ageing antennas, and the ease with which all existing users could switch to the DCF77 time signal, the Swiss Federal Government decided to shut down HBG at the end of 2011. HBG transmission ceased at 2012-01-01 07:00:13.2 UTC.

On 6 September 2012 at 12:02:00 UTC both antenna towers were demolished by controlled explosives.

The HBG transmission format was very similar to DCF77. At the beginning of each second (with the exception of the 59th), the carrier signal was interrupted for a period of 0.1 s or 0.2 s, which corresponded to a binary "0" or "1". The transmission of the minute, hour, calendar date, day of the week, month and current year was achieved by means of a BCD code identical to that of DCF77.

Like DCF77, the carrier was not interrupted during the last second of each minute.

Differences from the DCF77 time code:

• The carrier frequency.
• Phase modulation was not included.
• Amplitude modulation was done by disabling the transmitter (0% amplitude) rather than reducing it to 15% amplitude as DCF77 does.
• Announcement bits warning of impending time zone changes or leap seconds were sent 12 hours in advance, rather than 1 hour.
• The first pulse of each minute was not a standard 0 bit as DCF77 sends. Instead, it was a double pulse, two 0.1 s interruptions separated by 0.1 s of carrier. A triple pulse signalled the start of a new hour, and a four-pulse signal was transmitted at noon and midnight.

It is understood that this frequency is now available in Europe, as well as any other part of the world, for time signal dissemination.

External links

• Information page on Swiss federal office of metrology (METAS)
• Pictures of the HBG transmitter in Prangins, Switzerland (emetteurs.ch)
• Observation of HBG during a leap second
• (German) Description of the HBG time code.
• Youtube video of the controlled teardown of the two masts