Interstate 240 (Oklahoma)

From Infogalactic: the planetary knowledge core
Jump to: navigation, search

Lua error in package.lua at line 80: module 'strict' not found.

Interstate 240 marker

Interstate 240
Lua error in Module:Infobox_road/map at line 16: attempt to index field 'wikibase' (a nil value).
Route information
Auxiliary route of I‑40
Maintained by ODOT
Length: 26.22 mi[2] (42.20 km)
Existed: 1965[1] – present
Major junctions
West end: Invalid type: I-Toll / Kilpatrick Turnpike / SH-152 in Oklahoma City
 
East end: I‑40 / US-270 / SH-3 in Oklahoma City
Location
Counties: Oklahoma
Highway system
I‑235 I‑244

Interstate 240 (I-240) is an Interstate Highway in southern Oklahoma City, Oklahoma, United States, that runs 26.22 miles (42.20 km) from I-40 to I-344 (John Kilpatrick Turnpike). The Interstate overlaps State Highway 3 (SH-3), the longest Oklahoma state highway, for its entire length and functions as a southern bypass around the Downtown area.

Major destinations along the route include Tinker Air Force Base and the heavily populated southside of Oklahoma City. With just under eight million square feet (0.74×10^6 m2) of commercial space,[3][unreliable source?] I-240 is a major corridor of retail, industrial, and office space. As of 2012, however, the corridor included some "pockets of shuttered stores and creeping shabbiness" and local planners were in the first stages of efforts to revitalize the corridor.[4]

Route description

From the western terminus at I-344, I-240/U.S. Highway 62 (US-62)/SH-3 runs east toward I-35. This western half is the busier of the two sections, serving the Southside area of Oklahoma City and traffic headed to the airport. This segment has a configuration of ramps that causes much weaving and many accidents. An entrance ramp merges onto the highway, forming a new lane. This new lane then becomes an "exit only" lane for the next exit. However, the exits are not spaced very far apart, causing entering and exiting traffic to conflict.[5] Signs were installed in October 2004 designating the western half of I-240 as the Keith Leftwich Memorial Loop in honor of a state senator who had died around that time.[6] I-240 meets I-35 at a cloverleaf interchange. US-62 splits off to join with I-35 northbound at this interchange.

The section of I-240 east of I-35 exists primarily to serve the now-closed General Motors plant and Tinker Air Force Base. This section is much less traveled, having only four lanes (two in each direction) for much of its length. At I-240's eastern terminus with I-40, motorists traveling eastbound on I-240 are forced to merge onto I-40 eastbound—there is no I-40 westbound offramp. (Those wishing to take I-40 westbound must exit off of I-240 one mile (1.6 km) earlier at Anderson Road, a surface street, and travel on it northbound until they reach I-40, or continue east on I-40 before turning around at the next exit at Choctaw Road.)

History

The section of what is now I-240 between I-35 and current I-44 was already complete in 1965 as an alignment of US-62.[citation needed] When the Interstate route was initially established in the 1960s, I-240 ran from its current eastern terminus around the city, turning north at the present interchange with I-44, continuing on the present course of I-44 to its present southern junction with I-35. (I-44 ended near Edmond at the western end of the Turner Turnpike at the time.) I-240 thus nearly created a loop around the city, intersecting both I-35 and I-40 twice. The section east of I-35 to its eastern terminus at I-40 was completed in 1973.[citation needed] The entirety of the route was complete in 1976.[citation needed] Once completed, I-240 was 31.76 miles (51.11 km) long.[7]

As part of Oklahoma's 75th anniversary (Diamond Jubilee) celebrations in 1982, the Oklahoma Department of Transportation (ODOT) extended I-44 to Lawton and Wichita Falls, Texas, along the H.E. Bailey Turnpike. This caused I-240 to be truncated to its current western terminus near Will Rogers World Airport.[8]

On August 2, 2021, the Oklahoma Transportation Commission approved an extension to the I-240 designation to form a beltway around Oklahoma City. Starting in the existing eastern terminus, I-240 will run concurrent with I-40 to the Kickapoo Turnpike, then turn north and follow the Kickapoo Turnpike north to I-44 (the Turner Turnpike), then turn west along I-44 to the Kilpatrick Turnpike, following that road west and south to its current southern terminus at SH-152, then turning east along SH-152 and following that road east to I-44, which it will overlap until reaching the current western terminus of I-240, bringing the total length of the proposed I-240 loop to 91 miles (146 km).[9] If signed, it will become the longest complete beltway numbered as a single Interstate Highway in the US, supplanting I-275 in Cincinnati, Ohio, at 83.71 miles (134.72 km). ODOT Director Tim Gatz stated in the Transportation Commission meeting that the numbering change was primarily to aid in navigation using digital mapping and routing applications. Gatz also said, "If you look at the Interstate 240 designation on the loop around the Oklahoma City metropolitan area, we are finally to the point where we have a truly contiguous route there that can shoulder the burden of some of that transportation need in a loop format. That's common practice across the country, and you'll see that in many of the metropolitan areas, and that update will really be beneficial as far as everything from signage to how do you describe that route on a green-and-white sign."[10][11] The designation was approved by the American Association of State Highway and Transportation Officials (AASHTO) in October 2021 with the condition that the Federal Highway Administration (FHWA) approve it as well.[12]

Future

ODOT began a redesign process for the I-35/I-240 interchange in southeast Oklahoma City in 1998. It is currently a four-leaf cloverleaf interchange that has deemed to be outdated and the improvements will change it to a multi-level interchange with dedicated interstate ramps, turnaround lanes, and service roads for improved city street access in six phases. Phase 1 began in early summer 2016 and was completed in May 2017 while phase 1A construction began in mid-June 2017 and was completed in summer 2018. Construction on phase 1B began on June 5, 2023, and is expected to be completed in 2025.[13]

In Fall 2023, the AASHTO approved an application from ODOT for an interstate designation on the Kickapoo Turnpike and the Kilpatrick Turnpike. However, the designations were assigned as I-335 and I-344 respectively; I-240 would not be extended along the turnpikes.[14] In March 2024, the OTA announced that it would extend I-240 along Airport Road to the junction with the Kilpatrick Turnpike when the turnpike was designated as I-344. SH-152's eastern terminus will be truncated to the junction between the turnpike and I-240.[15]

Exit list

Lua error in package.lua at line 80: module 'strict' not found. The entire route is in Oklahoma City, Oklahoma County.

mi[16] km Old exit New exit Destinations Notes
0.0 0.0 Invalid type: I-Toll west (Kilpatrick Turnpike) – Yukon
SH-152 west – Mustang
Eastbound exit ramp still under construction; future western terminus; highway continues west as SH-152
0.5 0.80 1 Council Road Westbound exit and eastbound entrance
3.0 4.8 3 MacArthur Boulevard – Mike Monroney Aeronautical Center Signed as exits 3A (south) and 3B (north)
4.0 6.4 4 Meridian Avenue – Airport Signed as exits 4A (south) and 4B (north)
5.2 8.4 5 I‑44 east (SH-3) to I‑40 – Tulsa, Downtown Western terminus of I-44 concurrency; western terminus of SH-3 concurrency; I-240 west follows I-44 exit 116B
9.2 14.8 116A SW 59th Street Exit number follows I-44
10.0 16.1 1A 11A I‑44 / US-62 west – Lawton Current western terminus of I-240; Eastern terminus of I-44 concurrency; western terminus of US-62 concurrency; I-44 EB exit 115
10.7 17.2 1B 11B S. May Avenue
11.7 18.8 1C 11C S. Pennsylvania Avenue
12.7 20.4 2A 12A S. Western Avenue
13.2 21.2 2B 12B S. Walker Avenue
13.7 22.0 3 13 S. Santa Fe Avenue / S. Shields Boulevard Westbound signed as "Santa Fe Avenue" only
14.0 22.5 3B 13B Shields Boulevard / Santa Fe Avenue Westbound exit only
14.7 23.7 4 14 I‑35 / US-77 / US-62 east – Dallas, Wichita Eastern terminus of US-62 concurrency; signed as exits 4A (south) and 4B (north); I-35 exit 121B
15.2 24.5 4C 15A Pole Road Eastbound exit permanently closed; westbound entrance only
15.8 25.4 5 15B Eastern Avenue
16.8 27.0 6 16 Bryant Avenue
17.8 28.6 7 17 Sunnylane Road
18.8 30.3 8 18 SH-77H south (Sooner Road) – Tinker AFB Northern terminus of SH-77H
19.8 31.9 9 19 Air Depot Boulevard
21.8 35.1 11A 21A Douglas Boulevard Westbound combined exit number 11
21.8 35.1 11B 21B Tinker AFB, Midwest City
24.9 40.1 14 24 Anderson Road
26.8 43.1 I‑40 / US-270 / SH-3 east Eastern terminus of I-240; no access to I-40 west; eastern terminus of SH-3 concurrency; I-40 WB exit 165
1.000 mi = 1.609 km; 1.000 km = 0.621 mi

References

  1. Lua error in package.lua at line 80: module 'strict' not found.[self-published source?]
  2. Lua error in package.lua at line 80: module 'strict' not found.
  3. Based on first quarter 2009 survey of buildings within 1/2 mile either side of I-240 between Will Rogers Airport I-44 and SH-77H (Sooner Road).
  4. Richard Mize, "Urban Land Institute, businesses, city aim to revamp I-240 in south Oklahoma City", The Oklahoman, March 10, 2012.
  5. Lua error in package.lua at line 80: module 'strict' not found.
  6. Stuve, Eric. Interstate 240. OKHighways. URL accessed 8 March 2006.
  7. Interstate System Route Log and Finder List, USDOT, March 1978
  8. "I-240 Section Changing to I-44." The Daily Oklahoman 9 October 1982.
  9. Lackmeyer, Steve, "An I-240 loop? South OKC interstate may soon circle the city", The Oklahoman, 2 August 2021.
  10. Lua error in package.lua at line 80: module 'strict' not found.
  11. Lua error in package.lua at line 80: module 'strict' not found.
  12. Lua error in package.lua at line 80: module 'strict' not found.
  13. Lua error in package.lua at line 80: module 'strict' not found.
  14. Lua error in package.lua at line 80: module 'strict' not found.
  15. Lua error in package.lua at line 80: module 'strict' not found.
  16. Lua error in package.lua at line 80: module 'strict' not found.

External links

Script error: No such module "Attached KML".