Lydford railway station

From Infogalactic: the planetary knowledge core
Jump to: navigation, search
Launceston Branch Line
miles
North Cornwall Railway
to Padstow
35½ Launceston
to Okehampton
30¾ Lifton
27½ Coryton
26 Liddaton Halt
to Okehampton
23¼ Lydford
Brentor(LSWR)
20 Mary Tavy and Blackdown
Tavistock North(LSWR)
16½ Tavistock South(GWR)
LSWR to Devonport
15½ Whitchurch Down Platform
Grenofen Tunnel
Walkham Viaduct
Magpie Viaduct
12½ Horrabridge
Yelverton Tunnel
11 Yelverton
Princetown Railway
10 Clearbrook Halt
Shaugh Tunnel
Shaugh Bridge Platform
Ham Green Viaduct
Bickleigh
Bickleigh Viaduct
Riverford Viaduct
Cann Viaduct
5 Plym Bridge Platform
Plymouth and Dartmoor Railway
to Lee Moor
4 Marsh Mills
GWR
to Exeter
Laira TMD
Plymouth and Dartmoor Railway
to Cattedown
Laira Halt
to Plymouth Friary and Sutton Harbour
 
Lipson Vale Halt
Mutley Tunnel
1 Mutley
Plymouth North Road
Cornwall Railway to Truro
Devonport(LSWR)
LSWR to Tavistock
0 Plymouth Millbay
Lydford in 1969

Lydford railway station was a junction at Lydford between the Great Western Railway (GWR) and London and South Western Railway (LSWR) situated in a remote part of north-west Dartmoor in Devon, England.

History

The station, known then as "Lidford", was opened on 1 June 1865 with the Launceston and South Devon Railway, a 7 ft (2,134 mm) broad gauge line that connected with the South Devon and Tavistock Railway to offer a service to Plymouth Millbay railway station. This line eventually became a part of the GWR.[1]

On 12 October 1874 the LSWR line was opened from Okehampton railway station. This was a 4 ft 8 12 in (1,435 mm) standard gauge line that carried trains direct from London Waterloo station, whereas passengers to the GWR's London Paddington station had to travel on the branch line to Plymouth and then change onto a main line train.

On 17 May 1876 a junction was opened between the two lines and LSWR trains could now reach its new station at Devonport by running over the GWR's route, which was now mixed gauge. On 1 June 1890 a new line, built by the Plymouth, Devonport and South Western Junction Railway, gave the LSWR a route to Devonport independent of the GWR. The GWR line was converted to standard gauge on 20 May 1892.

The connection between the two lines was removed in 1895 but was replaced in 1943 to give flexibility should the railway lines around Plymouth be damaged by World War II bombing. Other connections were installed at Launceston railway station and at St Budeaux.

The station had been renamed "Lydford" on 3 June 1897. Trains were withdrawn from the former GWR branch on 31 December 1962 but continued on the main line until 6 May 1968. Goods traffic ceased on 7 September 1964.

Description

The original station had a passing loop and two platforms, with the station offices on the platform used by trains towards Plymouth. The LSWR built their platforms alongside the original ones, so the original booking office became a waiting room on an island platform with both companies opening new offices on their respective outside platforms.[2]

From 1 March 1914 the LSWR took responsibility for the GWR platforms. The GWR signal box was closed on 8 January 1917, when signal controls were combined in a single box on the central platform with two lever frames – one for each line – placed back to back. The signalman had trains from Tavistock on his left when working the GWR frame, but on his right when working the LSWR one.

Goods traffic was handled in a yard at the north end of the station between the two lines with access from both.

Preceding station Disused railways Following station
Bridestowe   London and South Western Railway   Brentor
Mary Tavy and Blackdown   Great Western Railway   Liddaton Halt

References

  1. Lua error in package.lua at line 80: module 'strict' not found.
  2. Lua error in package.lua at line 80: module 'strict' not found.

Further reading

  • Lua error in package.lua at line 80: module 'strict' not found.

Lua error in package.lua at line 80: module 'strict' not found.