Potassium alum

Potassium aluminium sulfate

Names
IUPAC name Aluminium potassium sulfate dodecahydrate
Other names Potassium alum Potash alum Alum-(K)
Identifiers
CAS Number	10043-67-1 Y 7784-24-9 (dodecahydrate) N
ChEBI	CHEBI:86463 N
Jmol 3D model	Interactive image
PubChem	24856
InChI InChI=1S/Al.K.2H2O4S/c;;2*1-5(2,3)4/h;;2*(H2,1,2,3,4)/q+3;+1;;/p-4
SMILES [O-]S(=O)(=O)[O-].[O-]S(=O)(=O)[O-].[Al+3].[K+]
Properties
Chemical formula	KAl(SO4)2·12H2O
Molar mass	474.3884 g/mol
Appearance	white small crystals
Odor	watery metallic
Density	1.725 g/cm3
Melting point	92 to 93 °C (198 to 199 °F; 365 to 366 K)
Boiling point	200 °C (392 °F; 473 K)
Solubility in water	14.00 g/100 mL (20 °C) 36.80 g/100 mL (50 °C)
Solubility	insoluble in acetone
Refractive index (nD)	1.4564
Vapor pressure	{{{value}}}
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
N verify (what is YN ?)
Infobox references

Potassium alum, potash alum, or potassium aluminum sulfate is a chemical compound: the potassium double sulfate of aluminium. Its chemical formula is KAl(SO₄)₂ and it is commonly found in its dodecahydrate form as KAl(SO₄)₂·12H₂O. Alum is the common name for this chemical compound, given the nomenclature of potassium aluminum sulfate dodecahydrate. It is commonly used in water purification, leather tanning, dyeing, fireproof textiles, and baking powder. It also has cosmetic uses as a deodorant, as an aftershave treatment and as a styptic for minor bleeding from shaving.

Characteristics

Octahedral potassium alum crystal with unequal distribution of the face area.

Potassium alum crystallizes in regular octahedra with flattened corners, and is very soluble in water. The solution reddens litmus and is an astringent. When heated to nearly a red heat it gives a porous, friable mass which is known as "burnt alum." It fuses at 92 °C (198 °F) in its own water of crystallization. "Neutral alum" is obtained by the addition of as much sodium carbonate to a solution of alum as will begin to cause the separation of alumina.

Mineral form and occurrence

Potassium alum or alum-(K) is a naturally occurring sulfate mineral which typically occurs as encrustations on rocks in areas of weathering and oxidation of sulfide minerals and potassium-bearing minerals. In the past, alum was obtained from alunite, a mineral mined from sulfur-containing volcanic sediments source. Alunite is an associate and likely potassium and aluminium source. It has been reported at Vesuvius, Italy, east of Springsure, Queensland, Alum Cave, Tennessee, Alum Gulch, Santa Cruz County, Arizona and the Philippine island of Cebu. A related mineral is kalinite, a fibrous mineral with formula KAl(SO₄)₂·11H₂O.

Uses

Chemical

• in tanning of leather to prepare the hide
• as a mordant for dyes
• in the clarifying of turbid liquids, including post-storm treatment of lakes to precipitate contaminants
• as a fire retardant in textile products
• (historically) as a hardener for photographic emulsions (films and papers), usually as part of the fixer. Modern alternatives are superior.

Medicinal

• as an astringent/styptic and antiseptic.
  • as a natural deodorant by inhibiting the growth of the bacteria responsible for body odor.
  • after shaving to prepare the skin
  • to reduce bleeding in minor cuts and abrasions, nosebleeds, and hemorrhoids.

Culinary

• As an additive to baking powder to provide a second leavening phase at high temperatures.

Traditional

• In Ayurveda, where it is called phitkari or saurashtri
• In traditional Chinese medicine it is called ming fan.

Toxicology and safety

Potassium alum may be a weak irritant to the skin.

See also

• Ammonium aluminium sulfate
• Alum