Road transport in Brisbane
The road transport of Brisbane, Australia consists of a network of highways, freeways and motorways. Some motorways have tolls applied.
Brisbane is a car dependent city. In 2006, within the South East Queensland region, 83% of trips were done by car.[1]
Contents
Network
The Brisbane River has created a barrier to some road transport routes. In total there are nine road bridges and one road tunnel, mostly concentrated in the inner city area. This has intensified the need for transport routes to focus on the inner city. One more cross-river tunnel is planned (East-West Link) as part of the TransApex plan.
Brisbane's road system was planned around large, spacious suburban areas. Dense suburbs now rely on several main road corridors that split through and between these areas and provide the only link to the CBD and other areas of Brisbane. Logan Road, Moggill Road, Old Cleveland Road and Gympie Road are but a few of these multi-lane corridors that come out of the CBD and snake through the suburbs.
Bypasses such as the Inner City Bypass, Airport Link and Clem Jones Tunnel are intended to help to circulate traffic away from the inner-city areas and main roads via limited-access roads above the ground, and tunnels below that have higher speed limits and exits to particular suburbs.
Existing high speed cross-suburban motorways such as the Western Freeway, Centenary Freeway, Pacific Motorway and Gateway Motorway provide alternative routes to main roads and connect up to main highways and other arterial roads. The TransApex plan tunnels, Airport Link tunnel and Clem Jones Tunnel, Legacy Way tunnel and East-West Link tunnel are designed to link all the various motorways in Brisbane together. Only East-West link is yet to commence planning or construction.
In total, the twisting Brisbane River is crossed by nine road bridges, one road tunnel, three railway bridges, three dedicated cyclist/pedestrian bridges and one dedicated bus/cycle/pedestrian bridge. Route signage is achieved by means of a system of Metroads, consisting of the most important arterial roads in metropolitan Brisbane including most motorways, and less important State Routes; however, in recent years, the Metroads are being superseded by an alphanumeric numbering system. Multiple freeways connect Brisbane to other cities, including the Pacific Motorway, the Bruce Highway and the Ipswich Motorway, all of which are part of the National Highway System. Brisbane is approximately 1,000 kilometres (620 mi) away from Sydney, the closest major capital city.
An upgrade to Brisbane's traffic lights system began in April 2011.[2] The old system was called Brisbane Linked Intersection Signal System (BLISS) and required a controller to trigger traffic lights to relieve congestion. The new system called Sydney Coordinated Adaptive Traffic System (SCATS) is used in every other Australian capital city and is expected to cost much less to maintain. All 850 sets of Brisbane City Council signal boxes require upgrades.[2]
Six major roads and bridges in Brisbane are tolled, with all of them using free-flow tolling technology.[3]
Motorways
Brisbane is served by several freeways. The Pacific Motorway connects the central city with the Gold Coast to the south. The Ipswich Motorway connects the city with Ipswich to the west via the southern suburbs, while the Western Freeway and the Centenary Freeway provide a connection between Brisbane's inner-west and the outer south-west, connecting with the Ipswich Motorway south of the Brisbane River. The Bruce Highway is Brisbane's main route north of the city to the rest of the State. The Bruce Highway terminates 1,700 kilometres (1,100 mi) away in Cairns and passes through most major cities along the Queensland coast.
The Gateway Motorway connects the Gold Coast and Sunshine Coasts by providing an alternate eastern route avoiding Brisbane's inner city area, connecting the Bruce Highway to the Pacific Motorway, and by linking to the Logan Motorway (albeit tolled) it forms part of an incomplete ring road. It crosses the Brisbane River over the tolled Sir Leo Hielscher Bridges. The Port of Brisbane Motorway links the Gateway to the Port of Brisbane, while Inner City Bypass and the Riverside Expressway act as the inner ring freeway system to prevent motorists from travelling through the city's congested centre.[4]
| Road Number | Motorway/Highway | Destination |
|---|---|---|
  |
Gympie Arterial Road / Bruce Highway | Carseldine (Gympie Road) - Bald Hills (M1 Gateway Gympie Arterial Interchange) - Pine River (Bruce Highway terminus) - Caboolture - Nambour - Cooroy - (Northern Regional Centres) |
 |
Gateway Motorway TOLL ROAD | Drewvale (M2 Gateway Logan Int.) - Eight Mile Plains (M1 Gateway Pacific Int.) - Murarrie (Port of Brisbane Mwy Int.) - Gateway Bridge - Bald Hills (M3 Gateway Gympie Arterial Int.) |
| |
Pacific Motorway | Inner City Bypass - Eight Mile Plains (M1 Gateway Pacific Interchange) - Loganholme (Logan Pacific Int.) - Helensvale (Gold Coast Int.) - Tugun Bypass - (NSW) |
| 30px |
Ipswich Motorway | Dinmore (Warrego Cunningham Interchange) - Gailes (Ipswich Logan Interchange) - Darra (Centenary Roundabout Interchange) - Rocklea (Granard / Ipswich Roads) |
|
Logan Motorway TOLL ROAD | Gailes (Ipswich Logan Int.) - Forest Lake (Logan Centenary Int.) - Greenbank (Logan Lindsay Highway Int.) - Drewvale (Gateway Logan Int.) - Loganholme (Logan Pacific Int.) |
| 30px | Centenary Highway / Western Freeway | Springfield Lakes - Forest Lake (Logan Centenary Interchange) - Darra (Centenary Roundabout Interchange) - Indooroopilly - Toowong Roundabout (Milton Road) |
| 30px | Mount Lindesay Highway | Moorooka - Greenbank (Logan Lindsay Int.) - Browns Plains - Jimboomba - Beaudesert - Rathdowney - Woodenbong, NSW (Summerland Way) - Tenterfield, NSW (New England Highway) |
|
Inner City Bypass | Kelvin Grove (Pacific Motorway) - Bowen Hills (CLEM7 Int.) - Albion (Kingsford Smith Drive) |
| 30px | Clem Jones Tunnel TOLL ROAD | Woolloongabba (Pacific CLEM7 Interchange) - Bowen Hills (Inner City Bypass Int.) |
| 30px | Port of Brisbane Motorway | Murarrie (Gateway Interchange) - Lytton |
| 30px | Airport Link TOLL ROAD (Completed 2011/12) | Bowen Hills (CLEM7/ICB Interchange) - Lutwyche - Toombul |
| 30px | Cunningham Highway | Dinmore (Warrego Cunningham Interchange) - Yamanto - Warwick - (South Western Regional Centres) |
| 35px |
Warrego Highway | Dinmore (Warrego Cunningham Interchange) - Brassall (Brisbane Valley Hwy Int.) - Gatton - Toowoomba - (Western Regional Centres) |
| 30px | Brisbane Valley Highway | Brassall (Warrego Int.) - Fernvale - Esk - Toogoolawah - near Kilcoy (D'Aguilar Highway) |
| 30px | D'Aguilar Highway | Caboolture (Bruce Highway Interchange) - Kilcoy - Nanango |
| 30px | Houghton Highway / Deagon Deviation | Clontarf (Redcliffe) - Brighton - Gateway Motorway |
Route numbering
-
This list is incomplete; you can help by expanding it.
The Brisbane system of road routes is numbered mostly separately to the rest of the state, and the systems on the Gold Coast and Sunshine Coast. The route numbering is basically distributed as so (with a few exceptions):
- Routes 1-6, 13 & 15: Major highways and motorways
- 10, 20 & 30: Orbitals (all incomplete)
- 21 - 29, 41 - 48: Eastern Brisbane
- 31 - 39: Western Brisbane
- 90 - 99: Southern Brisbane and Gold Coast
Due to the introduction of Metroads in the early 1990s, a few routes around the city are split up. Routes 
and 
are examples of routes which were formally continuous, but have been superseded by Metroads or M routes.
Management
Traffic in Brisbane metropolitan area is managed by the Brisbane Metropolitan Traffic Management Centre. It operates non-stop, provides a phone hotline and a website which provides traffic and travel information.[5]
Current infrastructure projects
- Legacy Way
- Expansion of Ipswich Motorway
- Kessels and Mains Road intersection at Mount Gravatt [6]
See also
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 2.0 2.1 Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
