Nissan Silvia

Nissan Silvia
File:Nissan Silvia S15 001.JPG
Overview
Production	1964–1968 1974–2002
Body and chassis
Class	Sports car
Layout	FR layout

The Nissan Silvia is the name given to the company's long-running line of sport coupes based on the Nissan S platform. Although recent models have shared this chassis with other vehicles produced by Nissan (most notably the European 200SX and North American 240SX in the S13 and S14 generations, and 180SX in the Japanese market), the name Silvia is not interchangeable with the chassis codes.

CSP311

Nissan Silvia (CSP311)
File:Nissan Silvia 001.JPG Nissan Silvia (CSP311)
Overview
Also called	Datsun 1600 Coupe
Production	1965–1968 554 produced
Assembly	Hiratsuka, Kanagawa (Nissan Shatai Plant)
Body and chassis
Body style	2-door coupe
Platform	Datsun CSP311 platform
Related	Datsun Fairlady SP311
Powertrain
Engine	1.6 L R I4
Transmission	4-speed manual
Dimensions
Wheelbase	2,280 mm (89.8 in)
Length	3,985 mm (156.9 in)
Width	1,508 mm (59.4 in)
Height	1,275 mm (50.2 in)
Curb weight	977 kg (2,154 lb)

The Nissan Silvia CSP311 made its public debut at the Tokyo Motor Show in September 1964 as the "Datsun Coupe 1500". The introductory model was a hand-built coupe based on the Fairlady convertible, styled with input from Count Albrecht Goertz. Its appearance is similar to the Lancia Fulvia coupe. The CSP311 was powered by the 96 hp 1.6 L Nissan R series engine. The engine was equipped with twin SU carburetors. Production ceased in 1968 after a mere 554 were made (mainly in 1965), each one of them unique with body panels crafted by hand. Most of the vehicles remained in Japan; however, 49 examples were exported to Australia and another 10 went to other countries.

The low production numbers and tedious method of construction assured that each car was unique and valuable; this is reflected by the car's purchase price of almost twice as much as the next model in the manufacturer's lineup at the time. After production ceased in 1968, the Silvia nameplate would not grace another Nissan vehicle until 1974. Its marketing approach was similar to the Isuzu 117 Coupé. The name "silvia" is a variation of the word "sylvia", which is a scientific genus term assigned to a class of birds, possibly a reference to the Nissan Bluebird which was in production at the time the Silvia was introduced. In Japan, it was sold at Nissan Bluebird Store locations, and was marketed with the "Nissan" name instead of the more widely used "Datsun" brand name.

S10

Nissan Silvia (S10)
File:Nissan New Silvia.jpg
Overview
Also called	Datsun 200SX (US) Datsun 180SX
Production	1975–1979
Assembly	Zama Plant, Zama, Kanagawa, Japan
Body and chassis
Body style	2-door fastback
Platform	Nissan S platform
Related	Nissan Sunny
Powertrain
Engine	1.8 L L18 I4 (Japan) 2.0 L L20B I4 (US)
Transmission	3-speed 3N71 automatic 5-speed manual
Dimensions
Wheelbase	2,340 mm (92.1 in)
Length	4,135 mm (162.8 in)
Width	1,600 mm (63.0 in)
Height	1,300 mm (51.2 in)
Curb weight	990 kg (2,180 lb)

The S10 was the first mass-produced Silvia built on the all-new S platform, intended as Nissan's compact, rear-wheel-drive, sporty car platform. Japanese versions were exclusive to Nissan Japanese dealerships called Nissan Prince Store along with the larger Skyline.

The S10 featured less "traditional" lines than similar offerings from rivals Toyota and Mazda and was summarily less popular with consumers in most markets. In Japan it was fitted with a 1.8 L L18 inline-4 engine, which it shared with the Datsun 610/Bluebird 180B. The Japanese version featured Nissan NAPS emission control technology at its introduction. In the North American market a version incorporating the larger-displacement 2.0 L L20B was offered as the 200B of the same series Bluebird and Skyline. This model in North America was affixed with the mandated 5 mph (8.0 km/h) bumpers and badged as the Datsun 200SX. The S10 Silvia and Datsun 200SX were based on the Datsun Sunny Coupe. Its success in both markets was limited, most buyers opting for the Celica over what was considered the more mundane S-Chassis. The car had the same drivetrain as the popular 510, but with leaf springs fitted at the rear, rather than the 510's independent suspension.

File:Nissan New Silvia2.jpg

Rear view

S110

Nissan Silvia (S110)
File:Silvia2000ZSE-X 04.jpg Nissan Silvia 2000 ZSE-X Coupe (Japan)
Overview
Also called	Nissan Gazelle Datsun Silvia Datsun 200SX (United States & Canada) Datsun Sakura (Mexico) Datsun 180SX Nissan 240RS (rally car)
Production	1979–1983
Assembly	Kanda, Fukuoka (Nissan Shatai Plant)
Body and chassis
Body style	2-door coupe 3-door hatchback
Platform	Nissan S platform
Related	Nissan Stanza
Powertrain
Engine	1.8 L Z18ET I4 turbo 2.0 L L20B I4 1.8 L L18E I4 2.0 L Z20/Z20E I4 2.0 L FJ20E DOHC I4 2.2 L Z22E I4 2.4 L FJ24 DOHC I4 (240RS)
Transmission	3-speed automatic 5-speed manual
Dimensions
Wheelbase	2,400 mm (94.5 in)
Length	4,400 mm (173.2 in)
Width	1,680 mm (66.1 in)
Height	1,310 mm (51.6 in)
Curb weight	1,105 kg (2,436 lb)

File:S110 Silvia.jpg

Datsun Silvia 180SX Hatchback (Europe)

File:Nissan Silvia S110.jpg

The facelift model Nissan Silvia Coupe with FJ20E DOHC engine (Japan)

This iteration of the Silvia (sold in United States and Canada as the Datsun 200SX and in Mexico as the Datsun Sakura (Japanese for cherry blossom)), available as a 2-door hardtop coupe and a new bodystyle 3-door hatchback. The Japanese market version of the hatchback was called the Gazelle and was exclusive to Nissan Bluebird Store locations sold alongside the Fairlady Z, while the coupe bodystyle Silvia remained exclusive to Nissan Prince Store locations alongside the Skyline. Its sharp-edged styling was shared with the new Nissan Leopard sedan and coupe, also exclusive to Nissan Bluebird Store.

This generation Silvia was uniquely progressive in that it was originally intended to feature a rotary engine, designed and built by Nissan. The resulting unit was fairly unreliable, and forestalled production. Coincidentally, it shared a chassis code with the Mazda Cosmo, the first Japanese production car to feature a rotary engine. The chassis was no longer shared with the B-series Nissan Sunny, and was upgraded to the larger A-series Nissan Stanza platform.

The car was redesigned shortly after it was released and the stillborn Wankel power plant was replaced by a line of conventional piston engines based on the new Z-series engine. These included the Z20 and the turbocharged and fuel-injected Z18ET, although the latter of the two was only available to the Japanese domestic market. In USA/Canada the 200SX had the Z20E with H165 rear axle from 1979 to 1981. From 1982 to 1983, it had a Z22E engine with H190 rear axle. Vehicles with engines under 2000cc are still considered "compact" vehicles under Japanese regulations regarding exterior dimensions, however, larger engine displacement incurred a higher road tax bill annually.

Gazelle

File:Nissan-Gazelle.JPG

1979–1983 Nissan Gazelle (S110)

Nissan rebadged the Silvia as the Gazelle coupé and hatchback so that Nissan's different dealership networks in Japan could all carry their own variants of the model. There are minor cosmetic differences between the two cars.

North America

The Silvia continued to be sold as the 200SX in North America, with either the two-door coupé or the three-door liftback bodywork. It was originally powered by the 2.0 L inline-four L20B engine, although in 1980 California-market cars received the twin-plug Z20 NAPS-Z inline-four of the same displacement. From the 1981 model year, this became the only engine available to the 200SX. Power is 100 hp (75 kW; 101 PS), channeled through a five-speed manual or a three-speed automatic.

the top model was the luxurious SL, which received a remote opening hood, trunk, and gas tank lid, more adjustable seats, and a removable glass skyroof. The hatchback model received sportier trim, while the notchback coupé focused more on luxury.

240RS

File:Nissan 240RS 003.JPG

Nissan 240RS

This generation saw the introduction of the Nissan 240RS (BS110), a coupe fitted with the 2.4-liter DOHC FJ24 engine. The 240RS was built between 1983 and 1985, its production extending the end of the S110 itself. The resulting machine became Nissan's official rally car in the World Rally Championship from 1983 to 1985, with best result finished 2nd in the 1983 New Zealand Rally.

S12

Nissan Silvia (S12)
File:JS12 Nissan SILVIA R-X HB.jpg Nissan Silvia Hatchback in Japan
Overview
Also called	Nissan 180ZX (Sweden) Nissan 200SX (North America) Nissan Gazelle (Japan, Australia)
Production	August 1983-1988
Assembly	Kanda, Fukuoka (Nissan Shatai Plant)
Body and chassis
Body style	2-door coupe 3-door hatchback
Layout	FR layout
Platform	Nissan S platform
Related	Nissan Stanza
Powertrain
Engine	1.8 L CA18ET I4 turbo 1.8 L CA18DET I4 turbo 2.0 L CA20E I4 2.0 L FJ20E I4 2.0 L FJ20ET I4 turbo 3.0 L VG30E V6
Transmission	5-speed manual 4-speed L4N71/E4N71 automatic
Dimensions
Wheelbase	2,425 mm (95.5 in)
Length	1984-86: 4,430 mm (174.4 in) 1987-88: 4,460 mm (175.6 in)
Width	1984-86: 1,660 mm (65.4 in) 1987-88: 1,669 mm (65.7 in)
Height	1984-86: 1,330 mm (52.4 in) 1987-88: 1,280 mm (50.4 in)
Curb weight	1,170 kg (2,580 lb)

The S12 was produced from August 1983 to 1988, with revisions to the exterior trim in 1987 (referred to as "Mark II"). It was sold in two configurations—a coupe (often called a "notchback" due to the side profile view of its rear window section) and a hatchback version.

A number of different engines were equipped in the S12 chassis, depending on production year and more specifically on the geographic market. These engines borrowed from previous designs, or in some cases, inspired future engine platforms (with the exception of the FJ series, which was designed solely with Rally competition in mind). For instance, the CA series initially borrowed design cues from the NAP-Z series. The CA18DET's DOHC head design was similar to that utilized in the later "RB" engine series, the inline-six engine that powered the Skyline GT-Rs. Certain trims had the S12 equipped with an optional V6 engine also shared by the 300ZX (Z31) of the same vintage; this engine would be augmented with dual cam heads for the Z32.

Japan

As with the S110, the S12 chassis in Japan was badged as both a Silvia and a Gazelle. The S12 Silvia in Japan was available in a hatchback as a basic model only, or as a coupé (notchback) in base, RS, and RS-X trims and exclusive to Nissan Prince Store Japanese dealerships as a junior companion to the Nissan Skyline. The S12 Gazelle was strictly a hatchback, available in regular, RS and RS-X variants and exclusive to Nissan Bluebird Store locations as a junior companion to the Fairlady ZX. The RS was equipped with the 2.0L DOHC "FJ" engine (FJ20E), while the RS-X was equipped with the same engine in a turbocharged version (FJ20ET). In 1987 Nissan discontinued the FJ Series engine in the S12 and replaced it with the CA18DET (with duel cams and a bigger turbocharger—the CA18DET. Japanese spec Gazelle models came with many options like voice command, fog lights and options for a variety of different motors (FJ20E, FJ20ET, CA18DE, CA18E, CA18DET.). The RS-X model also came with different factory alloy wheels. When the S13 Silvia was introduced in 1988 in Japan, the Gazelle nameplate was replaced with the Nissan 180SX as a junior companion to the 300ZX, although in Australia there would not be a replacement until the introduction of the Silvia-based Nissan 200SX in 1995.

North America

The S12 Silvia brand in North America was badged as a "200SX". For fear that the North American market would not be as profitable as other markets throughout; without any major innovations, Nissan Executives only scheduled the manufacturing of 5k of each trim package/engine options in the final 2 years before the halt of US production. Leaving the final year of the S12 1988. The S12 "XE" was strictly a coupe or a "notchback", and was only available with a 2.0L SOHC, non-turbo engine and made available with either a 5 speed manual or 4 speed automatic gearbox. (CA20E) The hatchback received both the 2.0L SOHC engine, and a 1.8L SOHC Turbo (non-intercooled) engine (CA18ET). For 1987 in the United States, Nissan discontinued the Turbo model and created the "SE" model which had a 3.0L SOHC V6 engine (VG30E), generating 160 hp (120 kW) and 174 lbf⋅ft (236 N⋅m) of torque. This was the same engine offered in the non-turbo 300ZX for that generation. For 1988 the "SE" model received a 5 hp (3.7 kW) gain from using the later "W" series revisions of the VG30E with a total output of 165 hp (123 kW) while torque remained the same at 174 lbf⋅ft (236 N⋅m).

Europe

File:Silvia S12 (2).JPG

Nissan Silvia Hatchback in Europe

The S12 chassis in Europe was badged as a "Silvia", with notable exception of Sweden where it was sold as a "180ZX". This is a curiosity because "ZX" is traditionally associated with the Nissan Z platform. The European S12 was available only in the hatchback configuration, with the same 1.8L SOHC Turbo (CA18ET) used in North America, and in some areas the 2.0L DOHC "FJ" engine (FJ20E). The "FJ" engine series was originally designed for the 240RS rally race car as a 2.4L carburated system (FJ24), and was underbored to 2.0L. It also saw use in the "DR30" Nissan Skyline chassis, in both turbocharged and naturally aspirated versions.

Australia

File:1986 Nissan Gazelle (S12) SGL coupe (2015-08-07) 02.jpg

1985–1986 Nissan Gazelle SGL coupe (Australia)

File:1984 Nissan Gazelle (S12) SGL coupe (2012-11-25).jpg

1984–1985 Nissan Gazelle SGL coupe (Australia)

File:1985 Nissan Gazelle (S12) GL hatchback (2008-11-10).jpg

1984–1986 Nissan Gazelle GL hatchback (Australia)

The S12 chassis in Australia, released in 1984, was badged as a Gazelle. The Australian Gazelle was available in both hatchback and coupe variants. It was equipped with the same 2.0-liter SOHC CA20E engine found elsewhere producing 78 kW (105 hp) at 5,200 rpm, and 160 N⋅m (120 lb⋅ft) of torque at 3,200 rpm. This engine was mated to either a five-speed manual gearbox or a four-speed automatic.

Trim levels comprised the GL hatchback (basic) and the luxury-oriented SGL coupe.

According to the May 1984 brochure, the coupe added: alloy wheels, mudflaps, electric windows/mirrors/antenna, a six speaker sound system (over four), time delay interior lighting, variable intermittent wipers, an armrest, carpet kickpads, and cloth headlining/sunvisors/door trims (over vinyl). An option pack for the coupe added air conditioning, power steering, and power sunroof. The hatchback's option pack added air conditioning, power steering, and power sunroof.

By the time of the August 1985 brochure, the coupe's option pack had been deleted, but the standard SGL coupe added power steering and a manual sunroof (a power sunroof was no longer offered). Air conditioning remained as an option, while power steering was added to the hatchback's option pack. The alloy wheel design was also changed.

The facelifted "Mark II" models were released to Australia in circa 1986.

Revisions

The S12 chassis in 1984-86 is referred to as "Mark I", with "Mark II" as a revision in '87. Below lists the description of both.

Mark I

The first trim of the S12 chassis. Bumpers featured matte-finish raised surfaces, and sides featured half-inch rubstripping. Cars featured a honeycomb radiator grille, and long corner lights. The RS-X trim in Japan and Europe received a hood bulge accent to accommodate the oversized dimensions of the FJ20E/ET engine, and featured a faux front vent with monogram (either FJ20, DOHC, or TURBO); In North America, the 1984 Turbo came with a "TURBO" monogrammed hood bulge accent, although all subsequent North American Mark I hoods were flat regardless of trim. In some markets, the 1984 and 85 could be had with a foam rubber deck spoiler. In 1986 the foam rubber deck spoiler was changed for a fiberglass version with an integrated third brake light. Some hatchbacks and all Turbo models came with ground effects, as did the RS-X coupes These had a combination of plastic mudflaps (monogrammed as either "NISSAN", or "SILVIA" in applicable markets) and accommodating foam rubber sideskirts, as well as a foam rubber lower deflection lip. 1984 year foam rubber sideskirts featured the "NISSAN" monogram.

Mark II

In 1987, the bumpers were updated, and the matte finished surfaces were eliminated for a more uniform surface. Rubstripping was increased to 2-inch height w/ scribe detailing. The honeycomb radiator grille was replaced with a slatted version that spanned the entire front end (previous was shorter), and cornerlights were shortened. The "SE" model and the Turbo (Canada, Europe) came with new fiberglass ground effects and mudflaps, painted in the color of the car, and a new and more pronounced lower deflection lip in the front. All Mark II S12's received a new reverse-cowl hood bulge design to accommodate clearance for the 3.0L V6. Optional rear mudflap accents were available.

Drivetrain

Engine

	CA18ET	CA18DET	CA20E	FJ20E	FJ20ET	VG30E
Aspiration	Single turbo	Single turbo	Natural	Natural	Single turbo	Natural
Valvetrain	SOHC 8-valve	DOHC 16-valve	SOHC 8-valve	DOHC 16-valve	DOHC 16-valve	SOHC 12-valve
Cylinders	4	4	4	4	4	6
Displacement	1809cc/1794cc	1809cc	1974cc	1990cc	1990cc	2960cc
Max Power	120 hp @ 5200 rpm /122 hp catalyst and 2 spark per cylinder (European version)	169 hp @ 6400 rpm	102 hp @ 5200 rpm	148 hp @ 6400 rpm	188 hp @ 6500 rpm	160 hp @ 5200 rpm (1987) 165 hp @ 5200 rpm (1988)
Max Torque	134ftlb (181.7Nm) @ 3200 rpm	156ftlb (211.6Nm) @ 4000 rpm	116ftlb (157.3Nm) @ 3200 rpm	136ftlb (184.4Nm) @ 4800 rpm	173ftlb (234.6Nm) @ 4800 rpm	174ftlb (235.9Nm) @ 4000 rpm
Drivetrain	Rear-wheel drive
Transmission	4-speed automatic / 5-speed manual

Special Editions

File:Nissan silvia grand prix S12.jpg

Nissan Silvia Grand Prix

In Europe, a limited-run (~50 units) version of the S12 was produced and sold as the "Silvia Grand Prix" model. Based on a Mark I chassis, it was powered by the FJ20E (with a few known to be sold with the CA18ET), and featured molded-in fiberglass wide body fenders and quarter sections and special edition wheels.

The widebody exterior grabs design cues from popular European rally car platforms of the time (e.g. Audi Quattro, BMW M3 Sport Evolution, Renault 5 Turbo 2, etc.), although Nissan's choice of the FJ20E over the FJ20ET suggests this was more of a "rally inspired" car rather than a serious performance trim. The Silvia Grand Prix holds the distinction as the rarest incarnation of the S12, and is generally considered something of a collector's item. The Mark II revision of the S12 chassis marked the end of the Silvia Grand Prix.

Motorsports

File:Nissan Slivia 200SX (RVS12) front-left.jpg

Nissan Silvia 200SX 1988 Safari Rally runner-up car

The elimination of Group B from the World Rally Championship signified the end of Nissan's FJ24-powered 240RS. The FJ20ET-powered Silvia RS-X of 1986 would have been Nissan's first choice, however there was an insufficient number of that exact trim sold in Japan to meet the WRC's Homologation requirements (5,000 units or greater). Nissan had to quickly find a car to replace the 240RS.

The North American 1987 200SX SE V6 was chosen and competed in 1986-89 as a 200SX. Nissan's creation and choice of this car ensured they could sell 5000 cars required for WRC Homologation. The S12 "SE" trim's V6 held the only real appeal to the North American market, allowing Nissan to sell right at 5000 cars to a single specification. The V6 was a very unusual choice as the WRC was dominated by 4-cylinder 2.0 L turbocharged engines, although it is interesting to note that for similar reasons Toyota entered WRC with the 6-cylinder Supra at the same time. The 200SX achieved a 1st place in the 1988 Ivory coast rally and 2nd place for two years running in the very challenging Safari Rally 1988 and Safari Rally 1989.

S13

Nissan Silvia (S13)
File:Nissan 13 silvia.jpg
Overview
Production	1988–1994
Assembly	Kanda, Fukuoka (Nissan Shatai Plant)
Body and chassis
Body style	2-door coupe 2-door convertible
Platform	Nissan S platform
Related	Nissan 180SX Nissan 200SX (Europe) Nissan 240SX (North America) Sileighty
Powertrain
Engine	1.8 L CA18DE I4 1.8 L CA18DET turbo I4 2.0 L SR20DE I4 2.0 L SR20DET turbo I4
Transmission	4-speed automatic 5-speed manual
Dimensions
Wheelbase	2474 mm (97.4 in)
Length	4521 mm (178 in)
Width	1689 mm (66.5 in)
Height	1290 mm (50.8 in)
Curb weight	1180 - 1224 kg (2700 lb)

The S13 Silvia, introduced in mid-1988 the 1989 model year, was immensely popular in Japan. At its introduction in 1988, it won the Car of the Year Japan Award. The Silvia was no longer exported, however; rebadged 180SX were instead sold in most markets. European versions of this car were still known as 200SX. In North America, the S13 (180SX front, all three different bodystyles) was known as the 240SX. In North America, the Nissan 200SX nameplate was on hiatus but would return on a 2 door coupe version of the B14 Nissan Sunny/Sentra (1995–99). The S13 was based on the first generation Nissan Cefiro, the A31. Following industry trends, the S13 Silvia switched to relampable fixed headlights. Projector optics were offered as an option.

In Japan, Nissan renamed the Gazelle as the Nissan 180SX, which was exported primarily under the name Nissan 240SX. The 180SX served as the junior companion to the Fairlady ZX at Nissan Bluebird Store Japanese dealerships. As before, the Silvia was exclusive to Japanese dealerships called Nissan Prince Store next to the Skyline.

The S13 Silvia coupe was made from 1988 to 1994, overlapping with the S14 Silvia introduced in 1993. The Nissan Silvia used fixed headlights; whereas, the 180SX, simply a hatchback version of the Silvia, introduced at the same time used pop-up headlights. The hatchback version, called the 180SX, replaced the Gazelle name in Japan, and remained in production until 1998. A Silvia convertible was briefly offered soon after the start of production, but it was never popular, perhaps due to high cost (3.25 million Yen in 1988), heavier curb weight, and chassis flex.

The S13 was one of the first uses of Nissan's multi-link rear suspension, the technology of which was previewed in concept cars in previous years, such as the Nissan MID4. It also offered a four-wheel steering system for the first time, known as HICAS-II. In 1990, HICAS-II was updated and renamed SuperHICAS. The S13 also saw the introduction of a viscous-type limited slip differential for some models.

S13 Silvias were initially powered by the CA18DE and CA18DET engines carried over from the end of S12 production, with an intercooler added to the CA18DET for a slight increase in stability and power. In mid-1990, (for the 1991 model year) the SR20DE and SR20DET engines debuted, offering improvements across the board in power and torque due to increased displacement and a more efficient turbocharger than was offered on the previous cars. One of the other simple changes that was made between the CA generation and the SR generation was the switch to a single colour paint job, instead of the two-tone colour sets that were previously offered. On top of this, the SR motor later debuted another variant of the platform known simply as the "black top". Identifiable by its black and silver rocker-cover (as opposed to the traditional red/silver cover), it featured a number of minor changes, resulting in little performance gain. It is vastly different from the more powerful "notch top" used in the S14 and S15 variants.

File:S13 SILVIA CONVERTIBLE.JPG

One of the rare Silvia Convertibles

In the U.S. the S13 was replaced after the 1994 model year by the new S14 design, but lived on until 1999 in Japan with a major face lift, the 180SX Aero (Type X). this was the "Kouki" generation, while the previous was "Chuki" gen. The Kouki featured newly design tail lights a redesigned aero body kit and out fitted with an airbag . In 1998, the S13 Silvia was resurrected, in part. A variant was produced by Kid's Heart for Nissan called the Sileighty, which featured the 180SX body with the front end from the Silvia. The Sileighty style was originally created by Japanese enthusiasts for their own 180SX's, and is still a common modification for the 180SX and 240SX fastback. The Sileighty also made an appearance in a Japanese anime and manga series known as Initial D. The series (based around the Japanese motor sports of Touge and drifting) featured the Sileighty in one of the last battles of the First Stage (or first season in the anime).

The creation of the Sileighty then followed by another version of the Silvia known as the Onevia. Based on the chassis of the S13, the front end of the Silvia would be removed and replaced with the front end of a 180SX. The Onevia was never retailed as a complete car in Japan (though it was in North America: the notchback version of the 240SX was essentially a left hand drive version of the Silvia with the 180SX/240SX nose).

There was also a retro-styled car (á la the Zimmer Golden Spirit) which used the S13 Silvia's centre portion, engine, and underpinnings. It is called the Mitsuoka Le-Seyde and was built in a very limited series in 1990.

Trim level designation

The S13 Silvia was the first S-series car to use the J's, Q's, and K's designations for the different trim packages. These names are references to the face cards of English playing cards.

The J's was the base model . The Q's model offered a slightly more refined experience and received electric options and an available LSD. The K's grade received the turbocharged CA18DET or SR20DET (depending on the year of manufacture) in addition to the options offered on the Q's.

On top of the K's and Q's models, the Club and Diamond Selection packages came with specific options bundled together. For example, all K's Club Selections came with projector headlamps, a rear spoiler, and 15" aluminum wheels while all Q's models came out with automatic climate control.

The Silvia A's "Almighty" was introduced in late 1992. Trim wise, the Almighty slotted between the J's and Q's, offering options not available on J's, but not including all the standard features of the Q's. The only available engine/transmission was the naturally aspirated SR20DE coupled with the four-speed automatic or a five-speed manual.

S14

This section is about this vehicle's Japanese model. See Nissan 240SX for information on the North American model.

Nissan Silvia (S14)
File:Nissan S14 front.jpg
Overview
Also called	Nissan 200SX Nissan 240SX (North America)
Production	1995–2000 1995–1998 (US)
Assembly	Kanda, Fukuoka (Nissan Shatai Plant)
Body and chassis
Body style	2-door coupe
Platform	Nissan S platform
Powertrain
Engine	2.0 L SR20DE I4 2.0 L SR20DET I4 turbo 2.4 L KA24DE I4
Transmission	4-speed automatic 5-speed manual
Dimensions
Wheelbase	2525 mm (99.4 in)
Length	4498 mm (177.0 in)
Width	1727 mm (68.0 in)
Height	1288 mm (50.7 in)
Curb weight	1253 kg (2762 lb)

The S14 Silvia debuted in Japan towards the end of 1993. It was lower and wider than the S13. New rounded styling contributed to the illusion of a greater increase in size than actually occurred. Wheelbase and track were both increased, leading to slightly improved handling. Unlike export markets, where sales of the S14 chassis variants faltered, the Silvia remained popular in Japan. However, the width dimension exceeded 1700mm, which pushed this generation out of the compact class tax bracket, which also made Japanese buyers liable for higher road taxes. The fastback bodystyle was discontinued internationally, leaving the coupe and convertible in production.

Trim level designations were similar to the S13, however the Club Selection package was dropped. "Aero" variants of the Q's and K's were offered that featured large rear wings and mild ground effects.

The S14 Silvia K's received a new version of the SR20DET, with a slight bump in power due to the implementation of Nissan's variable cam timing system known as N-VCT, on the intake cam, and a larger T28 turbocharger.

File:Nissan Silvia K's SE (S14) left.JPG

Nissan Silvia K's in Japan

There was a mild styling update to the S14 during 1996, which added aggressive-looking projector headlamps and tinted taillights to all models. Fascias and other exterior trim pieces were also revised. The turbocharger now used a more efficient ball bearing center section. This updated version is also known as the kouki (後期, literally "later period") S14, or by enthusiasts as the S14A. It was sold as the second generation 240SX in North America from 1995 to 1998. The final model year of S14 production in all markets was 2000, called the Touring Model, which had a better engine block, pistons, and better acceleration in lower gears.

270R

The Nismo 270R was a limited edition vehicle developed by Nissan Motorsports. The vehicle was built on the S14 chassis but had many enhancements over the Silvia. Only fifty 270Rs were ever built and they were only produced in 1994. The '270' is in reference to the horsepower of the unique car as opposed to the displacement of the engine (as other vehicles, including the 240sx, were previously named upon). The 270R featured a vented hood with a top mounted intercooler, Nismo 'Edge' Aero kit, heavy duty clutch, 2-way limited slip differential, NISMO logo front and rear seats among other upgrades. All the 270s were painted black with 'Nismo 270R' badging above the rear wheels and a product numbered plaque in the glove compartment.

Autech Version K's MF-T

Tuning company Autech, has a tuned adaption of the CS14 King's variant. This includes Aero style HUD with white displays and gauges for oil pressure, boost, and voltage in the centre console, along with a MOMO steering wheel and leather gear knob. The interior trim is also revised.

Handling improvements include multi-link suspension, firmer shocks and springs, front strut brace, and a rear sway bar. A large F40 style rear spoiler and aero bodykit with Autech indicators are also fitted. An "Autech Version K's MF-T" badge and sticker can be found on the boot.

An IHI ball bearing turbo (VN14) was fitted in favour of the Garrett T28 for slightly quicker response and flow. Larger 480 cc Injectors found in the later S15 Spec R's were also fitted as well as a thicker 80 mm intercooler also found in S15's. To help expel exhaust, a higher flowing Fujitsubo Giken (FGK) exhaust was fitted.

The engine is an Autech-tuned SR20DET that produces 182kW (245hp/250PS).

According to the Autech website, the vehicle is still available at a cost of ¥2.99 million yen (US$26,875).

S15

Nissan Silvia (S15)
File:Nissan s15.jpg
Overview
Also called	Nissan 200SX (AUS/NZ)
Production	1999–2002
Assembly	Kanda, Fukuoka (Nissan Shatai Plant)
Body and chassis
Body style	2-door coupe 2-door convertible
Layout	FR layout
Platform	Nissan S platform
Powertrain
Engine	2.0 L SR20DE I4 2.0 L SR20DET I4 turbo
Transmission	5-speed manual 6-speed manual 4-speed automatic
Dimensions
Wheelbase	2,525 mm (99 in)
Length	4,445 mm (175 in)
Width	1,695 mm (67 in)
Height	1,285 mm (51 in)
Curb weight	1,200–1,450 kg (2,646–3,197 lb)

Japan saw a new version of the Silvia (S15) in 1999, now boasting 250 hp (184 kW) from its SR20DET engine, thanks to a ball-bearing turbocharger upgrade, as well as improved engine management. The SR20DE (non-turbo motor) featured 165 hp (121 kW).

The S15 Silvia included aggressive styling inside and out, updating the previous Silvia styling in-line with modern car design trends. The body dimensions were reduced from the previous generation so that it would comply with Japanese Government compact class, which had an effect on sales of the previous model.

File:Nissan Silvia spec S (S15) rear.JPG

Nissan Silvia spec-S in Japan

The S15 Silvia model lineup was initially simplified to just the Spec-S and Spec-R, both models offering an "Aero" variant with a large rear wing and side skirts/valances.

This generation of the Silvia was only sold in Japan, Australia and New Zealand but was available as a grey import in most other countries. In Australia and New Zealand the car was sold as the Nissan 200SX.

Within the Australian domestic market (AUDM), the S15 sold in 2 trim levels as noted above; Spec-S and Spec-R - however both models featured the SR20DET motor, albeit slightly detuned from the JDM spec cars. Nissan S15s were never officially sold with the naturally aspirated SR20DE engine in Australia or New Zealand. These two models were available at Nissan showrooms until the Nissan 200SX GT was introduced in 2002, the last year of production for the S15. Main differences here were namely the wheels being finished in a silver shadow chrome, chrome interior door handles, chrome gear selector surround, "sports" metal pedal set and an updated larger rear wing.

• Nissan S15 200SX.jpg

  New Zealand S15 200SX

• Nissan Silvia Varietta 002.JPG

  Nissan Silvia Varietta

As of August 2002, Nissan stopped producing the S platform with the S15-series Nissan Silvia being the final variant. Production of the Silvia amidst Nissan's efforts to reduce its myriad of platforms. The S15 Silvia was therefore the last car to hold the Silvia badge. Nissan's worldwide sports car platform is now the FM platform, which underpins the current Fairlady Z (the 350/370Z outside Japan), as well as the 2001–present Nissan Skyline (the Infiniti G35/37 in North America).

Variants

Spec-R

The Spec-R differed from previous Silvia models by featuring a 6-speed manual transmission. The Spec-R also included extensive chassis and suspension strengthening via the use of larger anti-roll bars and strut bracing. The S15 featured the same 4-piston front brake calipers that were found in the Z32 300zx but included a larger brake booster.

One of the biggest changes to the S15 model of the Silvia fitted with the 6-speed manual transmission built by Aisin AI was the implementation of a helical limited slip differential. The result was a safer, more track suited drive; in some contrast to its drifting heritage and subsequent media attention. All other versions of the Silvia (S14, S15 Spec S JDM) came with the viscous limited slip differential.

As with many Nissans, HICAS (High Capacity Active Steering) four-wheel steering was available as an option.

The Nissan Silvia S15 Spec-R is featured as a starter car in Real Racing 3.

Spec-S

The Spec-S featured a 5-speed manual transmission (in addition to a 4-speed automatic available on both the Spec-S and the Spec-R). It lacked the additional chassis support of the Spec-R; featured 4-piston front brake caliper and a slightly smaller brake booster. The Spec-S came only with an open differential. Australian-delivered Spec-S models featured the same helical differential, chassis bracing and 6 speed manual transmission as the Australian market Spec-R models.

The S15 line was later expanded to include various luxury and upgrade option packages for both the Spec-S and Spec-R. Autech, a specialty car developer, also offered several tuned versions of the S15; one with body and interior trim modeled after the Ferrari 456, called the style-A, available in both Spec-S and Spec-R based trims; and a second tuned version was based on the Spec-S trim level with the engine output increased to 200 hp (150 kW) through the use of increased compression, more aggressive camshafts, and free-breathing intake and exhaust tracts, along with ECU tuning and upgrades to the chassis and suspension. This version also included the 6-speed transmission and other upgrades normally found only in the Spec-R.

Silvia Varietta

Nissan offered in Japan a retractable hardtop variant of the Silvia, called the Varietta. The Varietta was built by Autech and was based on the Spec-S model, featuring the same naturally aspirated engine, with a choice of the 5-speed manual transmission or the 4-speed automatic transmission. This is a rare type of Nissan Silvia which is uncommon in most places.

Motorsports

S15 Silvia of 2004 D1GP champion Ryuji Miki

The S-series is a popular drift car, especially the S13 through S15 vehicles. The car has enjoyed success in the sport, having won 7 D1 Grand Prix championships with 5 different drivers driving the S15 (Nobuteru Taniguchi:2001; Ryuji Miki:2004; Yasuyuki Kazama:2005; Masato Kawabata:2007; Youichi Imamura:2009,2010,2011)

Silvias have been raced successfully in the All-Japan Grand Touring Car Championship (now Super GT) and its predecessors. In the late Eighties, when Group B was banned, S110 and S12 Silvias also saw limited success in rallying, mainly on endurance rallies. During the S13's production, there was a one-make series in Japan. The S13s were also successful in racing in the IMSA GTU class during the 1990s.

The Silvia S15 of Under Suzuki has dominated the Tsukuba circuit lap time record for some time. After it defeated the HKS CT230R LanEvo for the record in 2012, Under Suzuki's S15 has been resetting Tsukuba's lap time record. The latest lap record is currently timed at 51.127s, even faster than an official JGTC race car ARTA NSX.

External links

• S12Silvia.com - Blog, Forum, and Tech for the International S12 Community
• 200SX.gr Hellas 200sx Club
• SXOC UK 200sx owners club
• Nissan Silvia S15—Archive of Nissan's official site for the S15 Silvia. (Japanese)
• Club-S12.org - International Nissan Silvia/Gazelle/200SX S12 Site - International Nissan S12 Chassis specific site.
• Nissan Silvia—Australian Nissan Silvia Club.
• SilviaWA - Nissan Silvia Car Club of Western Australia
• Zilvia - S chassis and Z chassis owners
• History of the Silvia Autospeed Magazine (note: some technical inaccuracies and minor nomenclature errors)
• Paper scale model of the Nissan Silvia. To download, print and build yourself.