Saladin box
A Saladin box is an instrument used for malting barley. It consists of a large rectangular container about 50 meters in length, and a set of vertical screws attached to a crossbar. The crossbar moves horizontally across the length of the container while the motion of the screws raise the barley from the bottom to the top. Combined with mechanical air flow across the barley for cooling, this allows for beds of barley between 60 cm (24 in) and 80 cm (31 in) deep to be turned over two or three times a day.[1] The screws are moved and turned by a system of pulleys and belts.[1]
The Saladin box was invented by the French Colonel Charles Saladin (1878-1942) in the late 1800s to overcome the problem where the roots of the malting barley would become entangled if not regularly turned by hand, forming large mats unusable for further processing, as encountered in the earlier system that used artificial air flow to cool the barley in deeper beds designed by Galland.[1]
Modern malting devices use a similar systems of screws as those invented by Saladin, but use ribbon screws rather than closed screws, perforated floors for aeration and cooling, and circular vessels instead of rectangular boxes[1]
