Subaru Legacy (third generation)

For a complete overview of all generations, see Subaru Legacy.

BE-BH series Legacy
File:2000-2001 Subaru Liberty (MY01) GX 2.0 sedan (2010-05-04) 01.jpg
Overview
Manufacturer	Subaru (Fuji Heavy Industries)
Production	1998–2004
Model years	1999–2004
Assembly	Ōta, Gunma, Japan Lafayette, Indiana, USA
Body and chassis
Class	Mid-size
Body style	"B" pillar Hardtop and Wagon
Layout	Front engine, four-wheel drive
Powertrain
Engine	2.0 L SOHC 137 hp (102 kW) H4 2.0 L DOHC 165 hp (123 kW) H4 2.0 L DOHC 280 hp (210 kW) twin turbo H4 manual 2.0 L DOHC 265 hp (198 kW) twin turbo H4 automatic 2.5 L SOHC 165 hp (123 kW) H4 3.0 L DOHC Flat-6 (162kW at 6000 rpm and 289 N⋅m (213 ft⋅lbf) at 4400 rpm)
Transmission	4-speed automatic 5-speed manual
Dimensions
Wheelbase	2,650 mm (104.3 in)
Length	4,760 mm (187.4 in) (wagon) 4,680 mm (184.4 in) (sedan)
Width	1,740 mm (68.7 in) (Int'l) 1,694 mm (66.7 in) (Japan)
Height	1,410 mm (55.7 in) (sedan) 1,510 mm (59.6 in) (wagon) 1,440 mm (56.5 in) (Brighton wagon)
Curb weight	1,500 kg (3,300 lb) max
Chronology
Predecessor	Legacy 2nd gen
Successor	Legacy 4th gen

File:Subaru-LegacyWagon-3rd-rear.jpg

1998–2004 Subaru Legacy Touring Wagon (Japan) with clear rear turn signal lenses and amber bulbs

File:3rd Subaru Legacy L wagon rear.jpg

2000–2002 Subaru Legacy L wagon (US)

File:2001 Subaru Liberty RX sedan (2015-11-11) 02.jpg

1999–2001 Subaru Liberty RX sedan (Australia)

Subaru launched the third generation Japanese and world-market Legacy in June 1998, while the North American model was introduced in 2000. In all markets except for the United States, production lasted through 2002, with a limited production Blitzen model sold mid-cycle under the 2003 model year in Japan. Production in the United States lasted through 2004.

At its introduction in 1999, it won the Automotive Researchers' and Journalists' Conference Car of the Year award in Japan.

All models were equipped with standard, symmetrical all wheel drive. World-market and Japanese models ranged from a normally aspirated 2.0 liter flat-4 to the EZ30 in the 3.0R model. Even though dimensions became mid-sized, it was still rated by the EPA as a compact car.

Flat roof wagons are no longer manufactured worldwide, and instead the raised roof is used for both the Legacy wagon and Legacy Outback (Lancaster in Japan).

In 2001 the EZ30, a newly designed 3.0 L H6 was offered in the Outbacks.

The Legacy is the only vehicle in this class that provides AWD as standard equipment.

Models

B4

The B4 model was introduced for the third generation, and was a sedan-only model. The RSK featured the familiar DOHC, twin-turbo 2.0 litre engine rated 280 bhp (210 kW) (265 bhp (198 kW) for automatic with manual mode). This results in a 0–60 mph time of 5.2 s for the Manual and 5.8 s for the automatic. This engine was popular with Japanese buyers due to reduced tax liability based on Japanese vehicle size legislation; the car offered performance advantages over larger cars sold in Japan with bigger engines but with a smaller tax bill. The B4 moniker also applied to naturally aspirated models, such as the 2.0L TS-R.

Australia models (called B4) were detuned to run on lower octane (98 RON) fuel and were rated 258 PS (190 kW; 254 hp) for the manual and 239 PS (176 kW; 236 hp) for the automatic models. This results in a 0–60 mph time of 5.6 s for the Manual and 6.6 s for the automatic.

A B4 TS-R model was equipped with a less powerful, naturally aspirated 2.0 L DOHC AVCS engine, but shared many of the body and suspension components of the more powerful RSK.

In 2001, a B4 RS25 model was introduced with a naturally aspirated 2.5 L DOHC engine.

In 2002, the B4 RS30 was introduced with a naturally aspirated 3.0 L EZ30 DOHC flat-six engine.

B4 Engine Structure

The B4 is powered by a 'phase 2' all-alloy DOHC, 16-valve, intercooled turbo 2-litre boxer four. According to official Subaru literature, there are several advantages to the boxer design. Due to the balance afforded by horizontally opposed cylinders, the crankshaft requires less weighting and there is no need to install balance shafts. This results in reduced noise, vibration and less power loss. Strength is also an advantage of the boxer design – the crankshaft is sandwiched between the left and right hand crankcases and is supported by 5 main bearings. The low and wide engine structure also lowers the vehicle's centre of gravity and improves mass distribution.

Working from the crankcases out, the 'phase 2' engine sees the crank thrust bearing relocated to the rear of the shaft – this reduces transfer of natural frequencies to the transmission, resulting in improved NVH. Pistons are all-new in the B4. Despite being made from forged aluminium, the pistons are heavier (162 up from 152 grams) and incorporate solid skirts, reduced piston pin offset, a molybdenum coating, reduced top-land to cylinder clearance and flat-top combustion surfaces. Improved off-boost torque comes from a raised static compression ratio – 9.0:1 compared to the Impreza WRX's 8.0:1.

The two DOHC, 16-valve heads incorporate a fuel-efficient, low-emission design, with a 'tumble swirl air' motion created by a specially shaped intake port and increased valve angle and lift. The belt-driven camshafts act directly on hollow valve stems. Intake valves are hollow (reducing their mass from 51.6 to 48.4 grams) and the exhaust valves (46.7 versus 50.5 grams) are sodium-filled for more efficient heat transfer.

Sequential Turbo Staging

The B4 uses a sequentially staged primary and secondary turbocharger to deliver good throttle response and a wide torque spread. The primary turbo delivers boost in the low rpm and load ranges to deliver 278Nm at 2000 rpm, while the secondary turbo joins in above 4000–4500 rpm. With both turbos boosting, a 320Nm torque peak arrives at 4800 rpm and maximum power (190 kW) is seen at 6000 rpm. Note that Japanese-market B4s – running on 100-octane fuel – are rated at 206 kW.

The primary turbo (located at the left rear of the engine) delivers boost in the low rpm and load range, while the secondary turbo comes in to aid mid-to-high range breathing. During the primary turbo stage, boost pressure is controlled by a conventional arrangement of an ECU-controlled duty-cycle solenoid and an internal wastegate.

The secondary turbo remains inoperative during this stage, as a separate exhaust control valve (situated on the right side of the engine) remains closed. This valve prevents exhaust gasses entering the secondary turbine.

During the 4000–4500 rpm transitional stage, however, the exhaust control valve is partially opened, bringing the secondary turbo up to near-operating speed. The ECU – working with another duty solenoid and vacuum diaphragm – determines the amount that the exhaust control valve opens. The ECU calculates this amount of valve opening based on the input of a differential pressure sensor that takes feeds from the intake manifold and the outlet of the secondary turbo.

Any boost pressure produced by the secondary turbocharger during the transitional stage is redirected to the atmospheric side of the compressor inlet (between the turbos and air filter).

With the primary turbo continuing to supply manifold pressure and the secondary turbocharger essentially bleeding off the boost it makes during the transition, the ECU will determine when to close the pressure relief valve and fully open the exhaust control valve. Once this is done, the ECU will again look at the input from the differential pressure sensor and open yet another valve – the intake control valve (which is mounted between the secondary turbo's compressor outlet and the intercooler).

With the intake control valve open, boost pressure from the secondary turbo is allowed to pass through the intercooler (in addition to the boost supplied by the primary turbo). Manifold pressure during the second stage of turbocharging remains regulated by the primary turbocharger's wastegate – there is only one turbine by-pass valve in the whole system.

Subaru claims: "The 'staging' between the single and twin turbo operating range, which was quite noticeable to the driver on the previous model B4, has now largely been 'tuned out' by the careful selection of turbocharger size and the controlling mechanisms. As can be seen from this torque curve, however, under some driving conditions it is still possible to detect a slight reduction in the rate of acceleration in the preparatory or intermediate phase that occurs between 4000–4500 rpm."

The Turbochargers

Despite being called twins, the B4's turbochargers are not identical. The primary turbocharger is an IHI VF33 unit, which uses a 46.5 / 35.4 mm 9-blade turbine wheel and a 47.0 mm / 35.4 mm 6 + 6 blade compressor. At idle, the turbo spins at around 20,000 rpm and it can go on to a maximum speed of 190,000 rpm. It has a 17 mm diameter wastegate opening to bypass excess exhaust gas. The secondary turbocharger is an IHI VF32. On the exhaust side it uses a 46.5 / 35.4 mm 9-blade turbine wheel, teamed with a 52.5 / 36.6 mm 10-blade compressor wheel. It's rated at 180,000 rpm. Both the primary and secondary turbochargers use a floating metal centre bearing – not ball bearings.

Intercooling

Like the WRX, the B4 uses a bonnet scoop to feed a top-mount air-to-air intercooler. Manufactured by Sanden, the intercooler has an effective depth of 73 mm, a width of 140 mm and a length of 370 mm. With 26 tubes to take induction air from one end-tank to the other, the unit has a 13.37 kW heat transfer capacity and reduces 120–130 degree Celsius charge air to 70–80 degrees Celsius (claimed).

Gearbox and Driveline

Australian-delivered Liberty B4s come with a longitudinally mounted 5-speed manual gearbox only. It is essentially the same unit that was introduced in MY99 models (which saw the most changes since the Liberty was introduced in 1990).

Amongst its list of improvements is increased case rigidity and twice the number of bolts attaching it to the engine (eight instead of four). The syncromesh baulk ring, gear docking teeth angles and the double cone syncro on 2nd and 3rd gear have also all been retuned.

The B4's 'S type' close-ratio gearset has taller ratios in the first three cogs than the Impreza WRX, but a shorter 4.11:1 final drive ratio counters some of this effect. Interestingly, the gears are now cold forged and shot peened for added strength and a flexible flywheel design is now incorporated to reduce engine vibration reaching the driveline. The pull-type 230mm single plate clutch has increased torque capacity thanks to an 830 kg clamping load pressure plate.

The B4's AWD layout is traditional Subaru. The viscous limited-slip centre coupling apportions front-to-rear torque 50:50. Torque distribution at the road, however, is dependent on load distribution and tyre grip. As a result, the static straight driving ratio is 60:40 front-to-rear. Under dynamic driving conditions, however, the torque distribution varies accordingly. The viscous coupling senses rotational speed difference between the front and rear axles and transmits torque to the end with the most grip (which has lesser axle rpm).

A rear viscous LSD is also used to improve high-speed stability and traction during low speed cornering.

Suspension

The B4 is suspended on the same platform as other Liberty models – MacPherson struts under the front and a multi-link strut rear. The front suspension incorporates cast aluminium L-shaped transverse links and the cross member features a newly devised 'performance rod'. The performance rod is a lateral brace, which improves side-axis stiffness by 500 percent and longitudinal stiffness by 50 percent. This provides more constant suspension geometry under hard cornering. The rear suspension, too, receives an additional support sub-frame to improve rear suspension lateral and longitudinal stiffness (by 200 percent and 20 percent respectively).

Front Suspension Damping Rate – Bump/Rebound (N @ 0.3 m/s) 932/2159 Suspension Travel – Bump/Rebound (mm) 105/95 Spring Rate (N/mm) 25.1 Swaybar Diameter (mm) 20 Rear Suspension Damping Rate – Bump/Rebound (N @ 0.3 m/s) 600/2350 Suspension Travel – Bump/Rebound (mm) 125/85 Spring Rate (N/mm) 47.5 Swaybar Diameter (mm) 17 The front strut is a lightweight Bilstein. The struts are inverted to deliver higher bending rigidity (thanks to larger damping tube diameter) and less damping fade as a result of increased piston size. Springs are mounted offset so their centreline coincides with the pivot axis. This reduces road shock and – by minimising bump and rebound friction – provides less vibration.

The B4's initial spring, damper and swaybar specifications were devised in Japan and later tuned at the Nurburgring circuit. It's said the target was to at least equal the performance of the BMW M3. Here are some of comparison figures:

Suspension Performance Liberty B4 BMW M3 Roll Angle @ 90m Circle Diameter 4.5 degrees 4.45 degrees Roll Angle @ 190m Circle Diameter 4.25 degrees 4.0 degrees Slalom – 8 pylons spaced @ 13m 8.0 sec 7.9 sec Slalom – 6 pylons spaced @ 30m 6.4 sec 6.2 sec Slalom – 10 pylons spaced @ 18m 10.2 sec 10.1 sec

Braking

The B4's 1495 kilogram mass is slowed by 294mm ventilated front disc brakes and twin-pot floating calipers and 290mm ventilated rear discs and single-pot floating calipers. An increased diameter vacuum assisted tandem booster gives reduced pedal effort though relatively firm braking feel (see graph). The system is diagonally linked to maintain safety in the event one line should fail, and front and rear pressure control valve are used to balance braking force to suit weight distribution. Maximum braking deceleration from 100 km/h is 0.99g with a 39.4 metre stopping distance.

The B4's standard anti-lock braking system is Bosch's 5.3i system (which is made under license by Nippon ABS). It's a 4-channel, 3-phase system with the front wheels controlled individually, while the rears are controlled jointly (through the 'select low' method). The select low method uses the rear wheel with the lower coefficient of adhesion to calculate the brake line pressure applied to both of the rear wheels.

An advantage of the new system is the increased level of wheel speed control afforded by the 3-phase control cycle, which now operates at 18 MHz (up from 12 MHz) and has increased ROM capacity (32kB up from 12kB). Under driving conditions, the result is around 50 percent less yaw moment (oversteer/understeer attitude) when one side of the vehicle is braking on ice and the other is on asphalt. One-third the amount of steering correction is needed under these conditions.

The aforementioned 'select low' method of rear braking force, together with electronically delayed buildup of braking force at the front wheel with a high adhesion coefficient and negative steering roll radius, maximises chassis stability under braking.

Electronics

A combined key, remote central locking transmitter and immobiliser transponder protects the Liberty B4 from theft. Once the key is inserted into the ignition barrel and switched on, an antenna amplifier (positioned around the ignition barrel) reads the transponder code and transmits it to the engine management system. Without the correct code sequence, the engine is not allowed to start.

In addition to the key immobiliser, Subaru Australia also installs a dual-stage security system (as came fitted to previous Impreza STis). The remote locking transmitter represents the first stage of security, while a console-mounted numerical keypad forms the second stage. To disarm the 6 points of immobilisation, the correct four-digit code must be entered into the keypad. The system also features an anti-hijack, mode, intrusion alert, false alarm prevention, internal screamer siren, infrasonic sensor, valet mode and anti cross-pollination software.

The B4's instrument cluster is back-lit and delivers excellent visibility under all conditions. The clock rings, pointers and the calibration data are sequentially illuminated once the ignition is switched on.

American car audio company McIntosh spent 12 months in Japan customising a sound system to suit the acoustics of the B4. The double-DIN head unit incorporates a single CD player, tuner and cassette deck, while some units also had a mini disc player. The system features a high-performance digital to analogue (D/A) converter, 20-bit Burr-Brown chips, Dolby B noise reduction (tape), dual antenna AM/FM radio and McIntosh's Power Guard technology, which gives low distortion at high sound pressure levels. A 6-band, 4-channel parametric equaliser has also been tuned specifically for the B4.

Separate to the head unit – under the front passenger seat – is the system amplifier. The output power handled by each of the 4-channels is 24W and the subwoofer is 60W. The total harmonic distortion of the system is as low as 0.05 percent – comparable to a good home audio system.

The speaker system comprises 20mm soft dome tweeters in the sail areas, 165mm polypropylene cone 2-ways in the front and rear doors and a 152 x 228mm subwoofer offset to one side on the rear deck. The whole system weighs about 10 kilograms.

An electronically controlled rear muffler is used to keep the B4 quiet at low road speeds. The pipe that leads into the rear muffler is divided in two, with one pipe equipped with a flapper valve. The ECU – working with an actuator and cable – opens this valve when travelling at medium-to-high road speeds. This increases exhaust gas flow.

Body

The bonnet of the Liberty B4 is made from 1mm thick aluminium. Once fitted with its intercooler scoop, the bonnet assembly weighs 9.5 kilograms – some 8 kilograms lighter than the steel bonnet fitted to other Liberty models.

Body strength has also been improved over the first 1999 current-shape Liberty. Torsional rigidity has increased from the 1999 model's 2.52 x 106 Nm2/rad to 3.5 x 106 Nm2/rad. Flexural rigidity is increased from 4.89 x 106 Nm to 5.47 x 106 Nm.

Other Interesting Tech Facts about the Liberty B4... The B4 has a 0.34 Cd and a CdA of 0.703 m2 It 190 kW at 6400 rpm and 320Nm at 4800 rpm – in comparison, the Australian delivered Impreza STi made 206 kW at 6500 rpm and 353Nm at 4000 rpm. Maximum boost pressure is quoted at 0.933 Bar (at 4800 rpm). The engine has a minimum fuel octane rating of 98 RON. Subaru Australia lists the vehicle capable of 0 – 60 mph (not quite 100 km/h) in 6.5 seconds, a 14.6 second quarter mile and a top speed of 220 km/h. Seventy six percent of its body is galvanised metal. Front caliper pot diameter is 42.8mm (x2), and rear caliper pot diameter is 38.1mm (x1). The B4 has a combined cycle driving range of 650 km.

GT

The GT is a tuned version of the Legacy Wagon, using 2.0l twin-turbo engine.

USDM GT

The USDM GT is a trim model that featured larger brake calipers than the standard trim, as well as simulated wood interior trim. The engine is the same 2.5l naturally aspirated EJ251 engine found in the standard trim.

USDM GT Limited

The GT Limited is a package offered on the USDM Legacy that had the same additions as the GT trim, and added the factory all weather package. This included features like heated seats, de-icer, and mirror defrosters, but retained the same EJ251 engine.

GT VDC

Basic spec GT twin turbo, but came with Subaru's own traction & stability control VDC (third generation)VDC, (Vehicle Dynamics Control). These models were only available in Auto.

GT-B

The GT-B is a further enhanced version of the GT Legacy Wagon, the "B" in the name referring to the Bilstein struts that the car was equipped with. The E-Tune II was introduced in 2001 as a 2002 model. Vehicles with the Bilstein shocks had a small Bilstein badge attached to the rear of the vehicle, below the "GT" badge. They featured some different interior options, larger brakes and wheels, and more.

D-Type

The fourth revision of the third-generation Legacy, introduced during 2001, made several important but subtle changes to the front of the car. The fenders, grille, and headlights were altered slightly, making interchangeability with A-C type impossible. The headlights in the Japanese market kept using HID bulbs as in previous years, but the shape on the headlight was altered slightly. The grille was made slightly taller than the A-C models, and the shape of the bumper around the grille was altered slightly to accommodate a lower joint where the hood and bumper meet. Consistent with previous models, the HID headlights had a dashboard mounted adjustment switch that allowed the driver to re-aim the headlights to reduce glare to approaching traffic, although the switches were altered slightly internally to adjust for the increase in power needed to adjust the new style headlights. The bonnet became a lighter aluminum alloy, similar to that available on the STI's at the time. Compression and timing changed in order to further reduce the effect of loss of boost during the switch over from the primary to secondary stages. The ECU also got an upgrade, it is now tunable by the manufacturer or third party tuning workshops. Additional optional extras were offered upon purchase including but not limited to; a new body kit, head light surrounds, and 4-pot brakes – the stock wheels were designed to accommodate this upgrade. The D-Type Legacy is Subaru's best shot at the sequential twin turbo engine besides the STI revision.

Blitzen (2000–2003)

The Blitzen model was the result of a collaboration with design house Porsche Design, and featured many unique parts and paint schemes. The wheels, body kit, and interior were all designed by this German group. It also featured an implementation of Aisin Seiki's new sequential automatic gearbox, the first use of sequential-shifting on a production Subaru model.

A wagon version was made available in 2001 with the EZ30 engine.

The model was refreshed in 2002 with an updated design.

The model was refreshed again in 2003 with the interior designed by Andreas Zapatinas.

Legacy Wagon Avignon Concept (2001)

It was a concept car named after an area in Southern France, based on the wagon body. It includes cobalt blue body, naturally aspirated 2.5 L engine, a unique body kit, wheels and interior accents, such as clay-colored seats and a light-colored dashboard.

The vehicle was unveiled in 2001 35th annual Tokyo Motor Show.

Legacy STi S401 version (2002)

It is a limited (400 unit target, 286 actually produced) version sedan built by STI division. It includes a twin sequential turbo 2.0L EJ208 engine and a 6-speed manual transmission.

Outback

Subaru Outback
File:2001-2002 Subaru Outback (MY02) H6 3.0 station wagon (2011-03-10) 01.jpg
Overview
Also called	Subaru Legacy Lancaster (Japan) Subaru Legacy Outback (Europe)
Production	1999–2004
Body and chassis
Body style	5-door station wagon 4-door sedan (USA only)
Powertrain
Engine	2.5L SOHC 165 hp (123 kW) H4 3.0L DOHC 212 hp (158 kW) H6
Transmission	4-speed automatic 5-speed manual
Dimensions
Wheelbase	2,649 mm (104.3 in)
Length	4,760.0 mm (187.4 in) (wagon) 4,683.8 mm (184.4 in) (sedan)
Width	1,745 mm (68.7 in) (Int'l) 1,694 mm (66.7 in) (Japan)
Height	1,607.8 mm (63.3 in) (2000–02 wagon) 1,579.9 mm (62.2 in) (2003–04 wagon) 1,480.8 mm (58.3 in) (sedan)

File:2000-2004 Subaru Outback Wagon.jpg

2000–2002 Subaru Outback Limited wagon (US)

File:2nd Subaru Outback sedan.jpg

2002 Subaru Outback Limited sedan (US)

Based on the third generation Legacy, the Outback became its own model and the Legacy SUS remained unique to North America, and was realigned with the Outback Limited package, offering the sedan, with an optional horizontal six-cylinder engine, also optional on the wagon. This bodystyle was introduced to Japan September 1998, and was called the Lancaster for the second generation, with the six-cylinder in Japan called the Lancaster 6. The name Lancaster is used for cities in England, Australia, Canada and the United States. The USA-spec Outback was available starting in 2000. The Outback saw a competitor from Nissan in Japan only called the Nissan Avenir Blaster with a similar appearance to the Outback starting October 17, 2000.

The raised roof was still kept as a distinction to previous models, but the new body is smoother, rounder, and about 3 inches longer, with a slightly longer wheelbase. Called a “boxer” for the way its pistons would flail outward as opposed to moving up and down, the engine of this car remained an original four cylinder. The new engine was known to provide more low-end torque and better fuel economy as well, which adds to its overall smooth ride. There were not any new changes to the front suspension, but there was a complete makeover to the rear suspension, which included a new design that occupied less of the backspace. This adds more room in the trunk and cargo floor for the convenience of the owner. In terms of safety, improvements that were made consist of the three-point seat belts for the driver and additional four passengers. There is also a child-safety-seat anchor for all of the seat positions in the back. For the front, the seat belts are positioned to better hold the driver and front passenger along with front and rear air bags installed to protect the people in such cases that there is a collision. The Subaru Outback received a good rating from The Insurance Institute for Highway Safety in 2000 for its performance in a safety demonstration of a crash test at 40 miles per hour. The Outback has been since developing to make it as safe, smooth, and convenient of a ride that it can be.

The rear seat on the Outback sedan does not fold down, unlike previous generations where the rear seat had a 60:40 folding seat for extended length items. Rear headrests are now included as standard equipment on all trim levels. The ground clearance is 7.3 in (190 mm). The engine now meets California's LEV emission standard.

The Outback came standard with a 165 hp (123 kW) by SAE, 4-cylinder boxer engine, four-cylinder SOHC design with a maximum torque of (166 lb⋅ft (225 N⋅m)) that was available at a lower RPM compared to the previous generation. The 2.5 L SOHC four-cylinder engine uses a timing belt that must be replaced around 100,000 miles (160,000 km), whereas the 3.0 L six-cylinder engine uses a timing chain that doesn't require replacement under normal conditions.

The base model six-cylinder was offered as the H6-3.0 — its interior, and available options, were identical to those of the Outback "Limited", with the exception of manual transmission, although many successful non-factory transmission swaps have proven that it physically bolts up without issue (but still requires some significant modifications to the electrical system). Badging for all 6-cylinder Outbacks was located on the front grille as well as on the rear of the vehicle.

In a higher trim level, known as the Outback L.L. Bean in the USA, a 200 Watt McIntosh stereo system was standard from 2001 to 2003. These were some of the only vehicles ever factory-equipped with McIntosh stereo equipment. Options also included an in-dash six-disc CD changer, VDC (for Vehicle Dynamics Control), and dual moonroofs. OnStar was available as an option on the USA-spec L.L. Bean. In-dash satellite navigation was offered on Japan-spec vehicles on upper trim level wagons starting with Model Year 1998, and continued to offer a Momo black leather steering wheel with genuine wood inlay, gearshift knob and parking brake handle. Plaid upholstery was still offered on Japan-spec Lancasters.

The six-cylinder was also available as the VDC, with Subaru's VDC (Vehicle Dynamics Control) system, which integrated stability control with traction control. The system was also mated to a previously used Japanese-market AWD system, called VTD, in which power was split 45/55 front-to-rear in normal conditions. When wheel spin is detected, the system cuts power to the spinning wheel and directs power to those that aren't. Only when necessary do the brakes slow the affected wheels, when the vehicle detects excessive oversteer or understeer. This package had more sound insulation than other trims, as well as those features found on the L.L. Bean, such as McIntosh stereo, OnStar, and leather interior. Its curb weight was just slightly higher than that of the standard L.L. Bean trim, and while the VDC badging was placed on the front quarter panels only, the H6-3.0 and Outback markings were also applied as usual.

Australia

File:2002-2003 Subaru Outback (MY03) 2.5 station wagon (2010-06-17).jpg

2002–2003 Subaru Outback (MY03) 2.5 wagon (Australia)

File:2001-2002 Subaru Outback (MY02) H6 3.0 station wagon (2011-03-10) 02.jpg

2001–2002 Subaru Outback (MY02) H6 3.0 wagon (Australia)

Australian-specification vehicles differ from cars delivered in the United States by following the Japanese models; primarily headlights, side indicators (on front quarter panels), rear tail lights, front and rear bumpers and a higher placing of the "Outback" badging on the front door bodywork (as opposed to being placed on the plastic cladding).

This generation of Outback was released in an early style with gold coloured cladding, all-in-one headlights (not dissimilar to the US model headlights) and internally a light gray cloth (sometimes speckled with various colours), a light brown wood textured dashboard and a plain instrument cluster. A nudge bar (a smaller style of bullbar or roobar) was also available as an aftermarket option. The later style (2002–2004) was updated with silver cladding, an updated range of paint colours, multi-unit headlights (where headlight and indicators were in different sections of the unit) and internally a dark gray/black cloth, dark gray plastics, a very dark brown faint wood texture and metal trims on the dials of the instrument cluster.

Models available included the base "Outback", the "Outback Limited" which added a sunroof and cloth/leather seats and the "Outback H6" which included the 6-cylinder engine with VDC as described in this article. The H6 was released with slightly different 16-inch wheels and available in a single metallic pearl off-white colour instead of the usual colour with gold or silver cladding. The H6 was only available in automatic, apparently due to the size of the 6-cylinder engine taking up too much space to fit the manual box and associated dual range mechanicals.

Japan

The Lancaster (as known in Japan) was released originally in September 1998 following the original release of the third-generation Legacy in May 1998. The Lancaster models were available originally in 2.5L engine size with the E-4AT transmission or 5-Speed Manual. In May 2000, Subaru released the Lancaster 6, featuring Subaru's reborn Flat-6 engine. This was in production from April 2000 to May 2001 when Subaru released the facelifted Legacy models included a revised Lancaster design. These changes were seen on 'Outbacks' produced in Japan, US built Outbacks did not use the facelifted design released by Subaru Japan.

The Lancaster ADA (Active Driving Assist) was introduced in September 1999. The system featured two CCD cameras mounted either side of the rear-view mirror. The system was installed on 2.5L models with VDC and then later in 2000 on the newer Lancaster 6 VDC models.

The ADA system featured 4 key safety components:

Function	Description
Lane Departure Warning	ADA will detect when the vehicle is diverging from the intended course of the road. An audible sound is made through the navigation system and dashboard warnings are illuminated.
Inter-vehicle Distance Warning	When the ADA detects the car fast approaching another vehicle in-front, the system will warn the driver via an audible sound.
Dynamic Cruise Control	Whilst cruise-control is active, ADA will keep the vehicle at a safe distance from the car in-front. This in turn requires no input from the driver when the car is fast approaching a vehicle ahead.
Curve Alarm / Shift Down	If ADA detects an upcoming corner & calculates the car could face loss of traction or under/oversteer, ADA will warn the driver audibly and down-shift the transmission automatically to provide engine braking to the vehicle in order to slow it before entering the corner.

While Subaru's newly marketed EyeSight system (essentially ADA) found in the 5th generation Legacy & Outback draws media attention for 'new advanced technology', the ADA system was actually a system developed back in the late 1990s along with the development of the 3rd Generation Legacy and is no means 'new technology' as such, but more a 'newly recognised' system for a more safety-conscious global market.

Baja

Subaru Baja

Main article: Subaru Baja

Subaru developed a four-door coupé utility (pickup) version of the Outback with all-wheel-drive, known as the "Subaru Baja" (pronounced ba-ha). Manufactured from 2002 to 2006 and marketed for the 2003 through to 2006 model years, the Baja combined the handling and passenger carrying characteristics of a traditional passenger car with the open-bed versatility, and to a lesser degree, load capacity of a pickup truck. Subaru marketed the Baja in the United States, Canada, and Chile.

The unibody design borrowed heavily from the existing mechanicals, platform and sheet metal of the Outback wagon. Production occurred at the Subaru of Indiana Automotive, Inc. factory in Lafayette, Indiana.

Specifications

Chassis types

code	BE	BH	BT
body styles	sedan	extended roof wagon	Baja Truck

Engines

Models	Years	Type (code)	Power, torque@rpm
B4 (Australia)	2001–2002	1,994 cc (1.994 L; 121.7 cu in) 2.0L H4 twin turbo (EJ208/206)	258 PS (190 kW; 254 hp)@6400, 320 N⋅m (240 lb⋅ft)@4800 manual 239 PS (176 kW; 236 hp)@6000, 309 N⋅m (228 lb⋅ft)@4800 automatic
B4 RSK & GT	1998–2003	1,994 cc (1.994 L; 121.7 cu in) 2.0L H4 twin turbo (EJ208/206)	280 bhp (210 kW)@6500, 343 N⋅m (253 lb⋅ft)@5000 Manual 265 bhp (198 kW)@6000, 319 N⋅m (235 lb⋅ft)@5000 automatic
B4 RS	2001–2003	2.0L H4 (EJ20)	157 PS (115 kW; 155 hp)@6400, 196 N·m (145 lb·ft)@3200
B4 RS25	2001–2003	2.5L H4 (EJ25)	172 PS (127 kW; 170 hp)@6000, 238 N·m (176 lb·ft)@2800
B4 RS30	2002–2003	3.0L H6 (EZ30)	223 PS (164 kW; 220 hp)@6000, 290 N·m (213 lb·ft)@4400
Blitzen wagon	2002–2002	3.0L H6 (EZ30)	223 PS (164 kW; 220 hp)@6000, 290 N·m (213 lb·ft)@4400
Blitzen wagon	2002–2002	1,994 cc (1.994 L; 121.7 cu in) 2.0L H4 twin turbo (Ej208/206)	280 bhp (210 kW)@6500, 343 N⋅m (253 lb⋅ft)@5000 Manual 265 bhp (198 kW)@6000, 319 N⋅m (235 lb⋅ft)@5000 automatic
STi S401 version	2002	2.0L H4 twin turbo (EJ20)	293 PS (216 kW; 289 hp)@6400, 343 N⋅m (253 lb⋅ft)@4400–5600

Transmissions

Models	Years	Type (code)
B4 RSK	2001	5-speed manual, 4-speed automatic
B4 (Australia)	2003	5-speed manual, 4-speed automatic
STi S401 version	2002	6-speed manual

The 4-speed automatic transmission had a feature where the transmission could be instructed to ignore 1st gear from a standing stop to assist driving on traction limited situations, such as ice and snow. The system was activated by moving the gearshift from the "D" position down to "2nd". The car would then start in 2nd gear, and not 1st. The transmission also splits the delivered torque 50-50 between the front and rear wheels. Once the car stopped, the transmission would start back in 2nd and not 1st, until the system was upshifted to 4th.

Japanese models with automatic transmission include a "Power/Econo" button that was previously installed on the gear selector has been relocated to the transmission surround on the right side, due to a redesign of the automatic transmission gear shift handle.

The automatic transmission also has the ability to change the shift points, and hold the gears longer when the engine is operating at higher RPM. This is achieved by pressing the accelerator pedal rapidly, which causes the transmission to hold the gear until 5000 rpm before shifting to the next gear. No indicator light appears in the instrument cluster, unlike previous generations. The transmission also has engine over-rev protection by shifting the transmission to the next available gear once 6500 rpm has been achieved, even if the gear selector is in a low gear position.

Japanese-spec vehicles with the twin turbo had a "Sportshift" manumatic transmission, that allowed the driver to push the automatic gearshift selector to the left, and then allow the driver to shift the automatic like a manual transmission. In-dash satellite navigation was offered on Japan-spec vehicles on upper trim level sedans and wagons starting with Model Year 1998, and continued to offer a Momo black leather steering wheel, gearshift knob and parking brake handle.