Thermoplastic polyurethane
Lua error in package.lua at line 80: module 'strict' not found. Thermoplastic polyurethane (TPU) is any of a class of polyurethane plastics with many properties, including elasticity, transparency, and resistance to oil, grease and abrasion. Technically, they are thermoplastic elastomers consisting of linear segmented block copolymers composed of hard and soft segments.
Contents
Chemistry
TPU are formed by the reaction of: (1) diisocyanates with short-chain diols (so-called chain extenders) and (2) diisocyanates with long-chain diols. The practically unlimited amount of possible combinations producible by varying the structure and/or molecular weight of the three reaction compounds allows for an enormous variety of different TPU. This allows urethane chemists to fine-tune the polymer’s structure to the desired final properties of the material.
Morphology
The final resin consists of linear polymeric chains in block-structures. Such chains contain low polarity segments which are rather long (called soft segments), alternating with shorter, high polarity segments (called hard segments). Both types of segments are linked together by covalent links, so that they actually form block-copolymers.
The polarity of the hard pieces creates a strong attraction between them, which causes a high degree of aggregation and order in this phase, forming crystalline or pseudo crystalline areas located in a soft and flexible matrix. This so-called phase separation between both blocks can be more or less important, depending on the polarity and the molecular weight of the flexible chain, the production conditions, etc. The crystalline or pseudo crystalline areas act as physical cross-links, which account for the high elasticity level of TPU, whereas the flexible chains will impart the elongation characteristics to the polymer.
These "pseudo crosslinks", however, disappear under the effect of heat, and thus the classical extrusion, injection moulding and calendering processing methods are applicable to these materials. Consequently, TPU scrap can be reprocessed.
Uses
TPU has many applications including automotive instrument panels, caster wheels, power tools, sporting goods, medical devices, drive belts, footwear, inflatable rafts, and a variety of extruded film, sheet and profile applications.[1][2] TPU is also a popular material found in outer cases of mobile electronic devices, such as mobile phones. It is also used to make keyboard protectors for laptops. [3]
Overview of TPU on the market
Properties of commercially available TPU include:
- high abrasion resistance
- low-temperature performance
- high shear strength
- high elasticity
- transparency
- oil and grease resistance
The currently available TPUs can be divided mainly in two groups, based on soft segment chemistry:
- polyester-based TPUs (mainly derived from adipic acid esters)
- polyether-based TPUs (mainly based on tetrahydrofuran (THF) ethers). The differences between these two groups are outlined in the table below:
Table of properties
Lua error in package.lua at line 80: module 'strict' not found. Table 1: Main differences between polyester- and polyether-based TPU.[4]
(A = excellent; B = good; C = acceptable; D = poor; F = very poor)
| Property | Polyester-based TPU | Polyether-based TPU |
|---|---|---|
| Abrasion resistance | A | C |
| Mechanical properties | A | B |
| Low temperature flexibility | C | A |
| Heat aging | B | D |
| Hydrolysis resistance | F | A |
| Chemical resistance | A | D |
| Microbial resistance | F | B |
| Adhesion strength | B | D |
| Injectability | A | C |
In other words, polyether-based TPU is used only in cases where excellent hydrolysis and microbial resistance is required, as well as in cases where extreme low temperature flexibility is important.
When stable light colour and non-yellowing performance are required, aliphatic TPU based on aliphatic isocyanates is used.
Recently, BASF has pioneered crosslinking during TPU production, made possible by adding liquid crosslinkers and using a masterbatch. Plant-based bio TPU has been developed for green thermoplastic elastomer applications by Merquinsa and GRECO, marketed as Pearlthane ECO and Isothane respectively.
Trade names
Key commercial brands available are:
- Epamould, Epaline for extrusion, Epacol for adhesives, Pakoflex for Synthetic Leather (EPAFLEX)
- Elastollan (BASF & Elastogran)[5]
- Pearlthane (Merquinsa, now part of Lubrizol)[6]
- Desmopan (Covestro)[7]
- Estane (Lubrizol)[8]
- Pellethane (Lubrizol)[9]
- New power industrial limited (New power®)
- Irogran (Huntsman)[10]
- Exelast EC (Shin-Etsu Polymer Europe B.V.)[11]
- Laripur (COIM SpA)[12]
- Avalon (Huntsman) -
- Isothane (Greco )[13]
- Zythane (Alliance Polymers & Services)Zythane
See also
References
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
