DAC530A2W
スーパーバイザ コンパレータまたは VDAC (電圧出力 DAC) チャネル搭載、NVM (不揮発性メモリ) と GPIO (汎用入出力) 搭載、10 ビット、300mA 電流源 DAC
DAC530A2W
- Current-source DAC:
- 1LSB DNL
- Two ranges: 300mA and 220mA
- 770mV headroom
- Dual (DAC532A3W only) voltage-output DACs:
- 1LSB DNL
- Gains of 1 ×, 1.5 ×, 2 ×, 3 ×, and 4 ×
- Programmable comparator mode on channel 1
- High-impedance output when VDD is off
- High-impedance and resistive pull-down power-down modes
- 50MHz SPI-compatible interface
- Automatically detects I2C or SPI
- 1.62V VIH with VDD = 5.5V
- General-purpose input/output (GPIO) configurable as multiple functions
- Predefined waveform generation: sine, cosine, triangular, sawtooth
- User-programmable nonvolatile memory (NVM)
- Internal or power-supply as reference
- Wide operating range:
- Power supply: 3V to 5.5V
- Temperature: –40˚C to +125˚C
The three-channel DAC532A3W and the dual-channel DAC530A2W (DAC53xAxW) are 10-bit, buffered voltage-output and current-output smart digital-to-analog-converters (DAC). The DAC53xAxW devices support a current source that is used for linear control of laser diodes and miniature motors. These devices support Hi-Z power-down mode and Hi-Z output during power-off conditions for voltage output. Channel 1 is configurable as a voltage-output DAC or a comparator. The voltage-output DACs provide a force-sense option for use as a programmable comparator and current sink. The multifunction GPIO, function generation, and programmable nonvolatile memory (NVM) enable these smart DACs for processor-less applications and design reuse. These devices automatically detect SPI or I2C interfaces, and contain an internal reference.
The DAC53xAxW feature set combined with the tiny package and low power make these smart DACs an excellent choice for laser diode power control and voice-coil motor (VCM) control in camera lens auto focus and zoom applications.
技術資料
種類 | タイトル | 最新の英語版をダウンロード | 日付 | |||
---|---|---|---|---|---|---|
* | データシート | DAC53xAxW 10-Bit Three-Channel and Two-Channel Voltage-Output and Current-Output Smart DAC With I2 C or SPI データシート (Rev. A) | PDF | HTML | 2025年 7月 11日 | ||
回路設計 | Programmable FET LED Biasing Circuit Using Smart DAC | PDF | HTML | 2024年 4月 18日 | |||
アプリケーション・ノート | 高速データ変換 | 英語版 | 2009年 12月 11日 | |||
アプリケーション・ノート | データ・コンバータのドリフトに関する設計者の必須知識: 最悪劣化度の構成要素を理解して仕様の条件を減らす | 2009年 4月 22日 |
設計および開発
その他のアイテムや必要なリソースを参照するには、以下のタイトルをクリックして詳細ページをご覧ください。
AFE532A3WEVM — AFE532A3W 8 ビットと 10 ビット、300mA 電流源 DAC の評価基板
AFE532A3W 評価基板 (EVM) は、バッファ付き、電圧出力と電流出力の D/A コンバータ (DAC) である AFE532A3W の機能と性能をさまざまな構成で評価するためのプラットフォームです。AFE532A3W は、1 個の 10 ビット 300mA 電流出力 DAC (IDAC)、1 個の 10 ビット電圧出力 DAC (VDAC)、外部信号監視用の 1 個の 10 ビット A/D コンバータ (ADC) を搭載しています。
AFE532A3EVM には、AFE532A3W VDAC の出力を負のバイアスとして評価するためのオプション回路があります。AFE532A3W (...)
ANALOG-ENGINEER-CALC — アナログ技術者向けカリキュレータ
スタンドアロン ツールとして使用できるほか、『アナログ回路設計式一覧ポケット ガイド』で説明されているコンセプトと組み合わせることもできます。
PSPICE-FOR-TI — TI Design / シミュレーション ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI を使用すると、内蔵のライブラリを使用して、複雑なミックスド (...)
TINA-TI — SPICE ベースのアナログ・シミュレーション・プログラム
TINA-TI をインストールするには、約 500MB が必要です。インストールは簡単です。必要に応じてアンインストールも可能です。(そのようなことはないと思いますが)
TINA は DesignSoft (...)
パッケージ | ピン数 | CAD シンボル、フットプリント、および 3D モデル |
---|---|---|
DSBGA (YBH) | 16 | Ultra Librarian |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL 定格 / ピーク リフロー
- MTBF/FIT 推定値
- 使用原材料
- 認定試験結果
- 継続的な信頼性モニタ試験結果
- ファブの拠点
- 組み立てを実施した拠点
推奨製品には、この TI 製品に関連するパラメータ、評価基板、またはリファレンス デザインが存在する可能性があります。