Chlorine trifluoride

Chlorine trifluoride

Names
Systematic IUPAC name Trifluoro-λ3-chlorane (substitutive)
Other names Chlorotrifluoride
Identifiers
CAS Number	7790-91-2 Y
ChEBI	CHEBI:30123 Y
ChemSpider	23039 Y
EC Number	232-230-4
Gmelin Reference	1439
Jmol 3D model	Interactive image Interactive image
MeSH	chlorine+trifluoride
PubChem	24637
RTECS number	FO2800000
UN number	1749
InChI InChI=1S/ClF3/c2-1(3)4 Y Key: JOHWNGGYGAVMGU-UHFFFAOYSA-N Y InChI=1/ClF3/c2-1(3)4 Key: JOHWNGGYGAVMGU-UHFFFAOYAB
SMILES F[Cl](F)F [F-].[F-].F[Cl++]
Properties
Chemical formula	ClF3
Molar mass	92.45 g·mol−1
Appearance	Colourless gas or greenish-yellow liquid
Odor	sweet, pungent, irritating, suffocating
Density	4 mg cm−3
Melting point	−76.34 °C (−105.41 °F; 196.81 K)
Boiling point	11.75 °C (53.15 °F; 284.90 K) (decomposes @ 180 °C (356 °F; 453 K))
Solubility in water	Reacts violently
Solubility	reacts violently with benzene, toluene, ether, alcohol, acetic acid, selenium tetrafluoride, nitric acid, sulfuric acid, alkali, hexane. Forms shock-sensitive explosive solution in CCl4
Vapor pressure	175 kPa
Viscosity	91.82 μPa s
Structure
Molecular shape	T-shaped
Thermochemistry
Std molar entropy (So298)	281.59 J K−1mol−1
Std enthalpy of formation (ΔfHo298)	−158.87 kJ mol−1
Vapor pressure	{{{value}}}
Related compounds
Related compounds	Chlorine pentafluoride Chlorine monofluoride Bromine trifluoride Iodine trifluoride
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Y verify (what is YN ?)
Infobox references

Chlorine trifluoride is an interhalogen compound with the formula ClF₃. This colourless, poisonous, corrosive, and extremely reactive gas condenses to a pale-greenish yellow liquid, the form in which it is most often sold (pressurized at room temperature). The compound is primarily of interest as a component in rocket fuels, in plasmaless cleaning and etching operations in the semiconductor industry, in nuclear reactor fuel processing, and other industrial operations.

Preparation, structure, and properties

It was first reported in 1930 by Ruff and Krug who prepared it by fluorination of chlorine; this also produced ClF and the mixture was separated by distillation.

3 F₂ + Cl₂ → 2 ClF₃

ClF₃ is approximately T-shaped, with one short bond (1.598 Å) and two long bonds (1.698 Å). This structure agrees with the prediction of VSEPR theory, which predicts lone pairs of electrons as occupying two equatorial positions of a hypothetic trigonal bipyramid. The elongated Cl-F axial bonds are consistent with hypervalent bonding.

Pure ClF₃ is stable to 180 °C in quartz vessels; above this temperature it decomposes by a free radical mechanism to the elements.

Reactions

Reaction with several metals give chlorides and fluorides; phosphorus yields phosphorus trichloride (PCl₃) and phosphorus pentafluoride (PF₅); and sulfur yields sulfur dichloride (SCl₂) and sulfur tetrafluoride (SF₄). ClF₃ also reacts explosively with water, in which it oxidizes water to give oxygen or in controlled quantities, oxygen difluoride (OF₂), as well as hydrogen fluoride and hydrogen chloride. Metal oxides will react to form metal halides and oxygen or oxygen difluoride.

ClF₃ + 2H₂O → 3HF + HCl + O₂

ClF₃ + H₂O → HF + HCl + OF₂

The main use of ClF₃ is to produce uranium hexafluoride, UF₆, as part of nuclear fuel processing and reprocessing, by the fluorination of uranium metal:

U + 3 ClF₃ → UF₆ + 3 ClF

Dissociates under the scheme:

ClF₃ ↔ ClF + F₂

Hazards

ClF₃ is a very strong oxidizing and fluorinating agent. It is extremely reactive with most inorganic and organic materials, including glass and teflon, and will initiate the combustion of many otherwise non-flammable materials without any ignition source. These reactions are often violent, and in some cases explosive. Vessels made from steel, copper or nickel resist the attack of the material due to formation of a thin layer of insoluble metal fluoride, but molybdenum, tungsten and titanium form volatile fluorides and are consequently unsuitable. Any equipment that comes into contact with chlorine trifluoride must be scrupulously cleaned and then passivated, because any contamination left may burn through the passivation layer faster than it can re-form.

The power to surpass the oxidizing ability of oxygen leads to extreme corrosivity against oxide-containing materials often thought as incombustible. Chlorine trifluoride and gases like it have been reported to ignite sand, asbestos, and other highly fire-retardant materials. In an industrial accident, a spill of 900 kg of chlorine trifluoride burned through 30 cm of concrete and 90 cm of gravel beneath. Fire control/suppression is incapable of suppressing this oxidation, so the surrounding area must simply be kept cool until the reaction ceases. The compound reacts violently with water-based suppressors, and oxidizes in the absence of atmospheric oxygen, rendering atmosphere-displacement suppressors such as CO₂ and halon completely ineffective. It ignites glass on contact.

Exposure of larger amounts of chlorine trifluoride, as a liquid or as a gas, ignites tissue. The hydrolysis reaction with water is violent and exposure results in a thermal burn. The products of hydrolysis are mainly hydrofluoric acid and hydrochloric acid, usually released as steam or vapor due to the highly exothermic nature of the reaction. Hydrofluoric acid is corrosive to human tissue, is absorbed through skin, selectively attacks bone, interferes with nerve function, and causes often-fatal fluorine poisoning. Hydrochloric acid is secondary in its danger to living organisms, but is several times more corrosive to most inorganic materials than hydrofluoric acid.

Uses

Military applications

Under the code name N-Stoff ("substance N"), chlorine trifluoride was investigated for military applications by the Kaiser Wilhelm Institute in Nazi Germany from slightly before the start of World War II. Tests were made against mock-ups of the Maginot Line fortifications, and it was found to be an effective combined incendiary weapon and poison gas. From 1938, construction commenced on a partly bunkered, partly subterranean 31.76 km² munitions factory, the Falkenhagen industrial complex, which was intended to produce 50 tonnes of N-stoff per month, plus sarin. However, by the time it was captured by the advancing Red Army in 1945, the factory had produced only about 30 to 50 tonnes, at a cost of over 100 German Reichsmark per kilogram. N-Stoff was never used in war.

Semiconductor industry

In the semiconductor industry, chlorine trifluoride is used to clean chemical vapour deposition chambers. It has the advantage that it can be used to remove semiconductor material from the chamber walls without having to dismantle the chamber. Unlike most of the alternative chemicals used in this role, it does not need to be activated by the use of plasma since the heat of the chamber is enough to make it decompose and react with the semiconductor material.

Rocket propellant

Chlorine trifluoride has been investigated as a high-performance storable oxidizer in rocket propellant systems. Handling concerns, however, prevented its use. John Drury Clark summarized the difficulties:

"It is, of course, extremely toxic, but that's the least of the problem. It is hypergolic with every known fuel, and so rapidly hypergolic that no ignition delay has ever been measured. It is also hypergolic with such things as cloth, wood, and test engineers, not to mention asbestos, sand, and water — with which it reacts explosively. It can be kept in some of the ordinary structural metals — steel, copper, aluminum, etc. — because of the formation of a thin film of insoluble metal fluoride which protects the bulk of the metal, just as the invisible coat of oxide on aluminum keeps it from burning up in the atmosphere. If, however, this coat is melted or scrubbed off, and has no chance to reform, the operator is confronted with the problem of coping with a metal-fluorine fire. For dealing with this situation, I have always recommended a good pair of running shoes."

References

Notes

^a Using data from Economic History Services and The Inflation Calculator, we can calculate that 100 Reichsmark in 1941 is approximately equivalent to US$540 in 2006. Reichsmark exchange rate values from 1942 to 1944 are fragmentary.

External links

• National Pollutant Inventory - Fluoride and compounds fact sheet
• NIST Standard Reference Database
• CDC - NIOSH Pocket Guide to Chemical Hazards - Chlorine Trifluoride
• WebElements
• Sand Won't Save You This Time, blog post by Derek Lowe on the hazards of handling ClF₃

See also

• Dioxygen difluoride
• Chlorine fluoride